scholarly journals A Misalignment Optical Guiding Module for Power Generation Enhancement of Fixed-Type Photovoltaic Systems

Micromachines ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 687
Author(s):  
Pan ◽  
Yen ◽  
Wang ◽  
Sun ◽  
Huang ◽  
...  
Keyword(s):  
Power Generation ◽  
Tracking System ◽  
Pv System ◽  
Optical Efficiency ◽  
Pv Panel ◽  
System A ◽  
Solar Tracking ◽  
Higher Power ◽  
Fixed Type ◽  
The Cost

: This study presents a misalignment light-guiding module to increase the effectiveness of absorbing light. For a general fixed-type photovoltaic (PV) panel, the misalignment light decreases the efficiency of the system. A solar tracking system was installed for obtaining higher power generation. However, the cost of the PV system and maintenance was 5–10 times higher than the general type. In this study, this module is composed of an array of misalignment light-guiding units that consist of a non-axisymmetric compound parabolic curve (NACPC) and a freeform surface collimator. The NACPC efficiently collects the misalignment light within ±30° and guides the light to the collimator. The light has a better uniformity and smaller angle at the exit aperture. The simulation results show that the optical efficiency of the unit was above 70% when the misalignment angle was smaller than 20°. The experimental results show that the power generation of the light-guiding unit was 1.8 times higher than the naked PV panel.

scholarly journals Mathematical modeling of electricity production by a PV installation for the conditions of the Republic of Mari El

2021 ◽  
Vol 5 (47) ◽  
pp. 5-5
Author(s):  
Alexander Saakian ◽  
◽  
Keyword(s):  
Mathematical Modeling ◽  
Power Supply ◽  
Tracking System ◽  
Residential Building ◽  
Electricity Production ◽  
Pv System ◽  
Threefold Increase ◽  
Solar Tracking ◽  
The Republic ◽  
The Cost

The authors built a mathematical model of the production of electricity by a PV installation with a grid inverter, intended for power supply of a rural residential building, for the conditions of the central part of the Republic of Mari El. Authors considered several options for the PV system: fixed-tilt PV panels, PV panels with a solar tracking system and a concentrator PV system. The most effective in terms of the electricity sold is the concentrator PV system. Compared to the version of the system with fixed-tilt PV panels, the use of concentrators provides a more than threefold increase (with a solar radiation concentration factor of 2) in the annual volume of electricity sold. For the variant of the system with PV panels with the solar tracking system (without concentrators), the analogous figure is 18.4%. The cost of electricity sold per year (at a price of 3.2 rubles / kWh) for three variants of the system will be: the system with fixed-tilt PV panels – 9140 rubles, the system with PV panels with the solar tracking system - 10820 rubles, the concentrator PV system - 30250 rubles. Keywords: PV INSTALLATION, MATHEMATICAL MODELING, VOLUME OF SOLD ELECTRICITY

scholarly journals Performance Evaluation of a Standalone Solar PV System for Electricity Generation in an Estate

2018 ◽  
Vol 2 (4) ◽  
Author(s):  
Richard Eberechi Echendu ◽  
Hachimenum Nyebuchi Amadi
Keyword(s):  
Performance Evaluation ◽  
Electricity Generation ◽  
Tracking System ◽  
Solar Pv ◽  
Pv System ◽  
Pv Panel ◽  
Solar Tracking ◽  
Efficiency Increase ◽  
Solar Pv System ◽  
Solar Tracker

This work focuses on the performance evaluation of a Standalone Solar Photovoltaic (PV) system for electricity generation in an estate requiring a daily power consumption of 50KW. This was achieved through a solar tracker software/hardware – embedded programme control system. A programmable microcontroller (PIC16F877A), light detection sensors (CDS NORP 12), motor driver IC (L293D), power relays (NTE-R22-5) and a dc gear motor with linear actuator (HARL-3618) were used. MikroC Pro compiler from Mikro Electroniker was used to programme the PIC16F877A. A fixed PV panel of same size was placed side by side and tested with the solar tracking system. The test results obtained showed that the solar tracking system produced 14.3W at 8:00am, increases to a maximum of 25.83W at 1:00pm and decreased to 16.28W at 6:00pm while the fixed PV panel produced 5W at 8:00am, increased to a maximum of 25.62W at 1:00pm and decreased to 10.6W at 6:00pm. These results gave the solar tracking system an efficiency increase of 33 percent over the fixed system. The designed system installed in residential homes has capacity to guarantee sustainable, durable and improved power supply.

scholarly journals Photovoltaic panels tilt angle optimization

2021 ◽  
Vol 239 ◽  
pp. 00019
Author(s):  
Kerry A. Sado ◽  
Lokman H. Hassan ◽  
Shivan Sado
Keyword(s):  
Solar Radiation ◽  
Tilt Angle ◽  
Tracking System ◽  
Incident Radiation ◽  
Solar Panels ◽  
Pv System ◽  
Total Cost ◽  
Pv Panel ◽  
Operation Costs ◽  
Solar Tracking

The tilt angle of solar panels is significant for capturing solar radiation that reaches the surface of the panel. Photovoltaic (PV) performance and efficiency are highly affected by its angle of tilt with respect to the horizontal plane. The amount of radiation reaching the surface of a PV panel changes with the changes in its tilt angle, hence adding a solar tracking system will maximize the amount of solar radiation reaching the surface of a PV panel at any time during the day, however, integrating solar tracking system will increase the total cost and maintenance of any PV system. Thus, using an optimized fixed tilt angle is the solution to element the initial, maintenance, and operation costs of a solar tracking system. Yet, the fixed angle is location-specific because it depends on the daily, monthly, and yearly location of the sun. In this study; daily, monthly and seasonally angles are calculated mathematically and the amount of incident radiation on the surface of the PV panel is measured along with its voltage. By comparing the practical measurements of the output voltage of PV panels, an optimized tilt angle is decided.

A Fuzzy Logic Controlled Single Axis Solar Tracking System

2015 ◽  
Vol 787 ◽  
pp. 893-898
Author(s):  
Suneetha Racharla ◽  
K. Rajan ◽  
K.R. Senthil Kumar
Keyword(s):  
Fuzzy Controller ◽  
Tracking System ◽  
Renewable Energy Sources ◽  
Energy Resource ◽  
Clean Energy ◽  
Energy Sources ◽  
Pv Panel ◽  
Solar Tracking ◽  
Simulation Results ◽  
Improved Performance

Recently renewable energy sources have gained much attention as a clean energy. But the main problem occurs with the varying nature with the day and season. Aim of this paper is to conserve the energy, of the natural resources. For solar energy resource, the output induced in the photovoltaic (PV) modules depends on solar radiation and temperature of the solar cells. To maximize the efficiency of the system it is necessary to track the path of sun in order to keep the panel perpendicular to the sun. This paper proposes the design and construction of a microcontroller-based solar panel tracking system. The fuzzy controller aims at maximizing the efficiency of PV panel by focusing the sunlight to incident perpendicularly to the panel. The system consists of a PV panel which can be operated with the help of DC motor, four LED sensors placed in different positions and a fuzzy controller which takes the input from sensors and gives output speed to motor. A prototype is fabricated to test the results and compared with the simulation results. The results show the improved performance by using a tracking system

An Active Low Cost Mesh Networking Indoor Tracking System

2014 ◽  
Vol 6 (1) ◽  
pp. 45-79 ◽  
Author(s):  
Sean Carlin ◽  
Kevin Curran
Keyword(s):  
Tracking System ◽  
Low Cost ◽  
Cost Effective ◽  
Limiting Factors ◽  
Unique Contribution ◽  
Scalable Vector Graphics ◽  
Web Technologies ◽  
Working Environments ◽  
System A ◽  
The Cost

Indoor radio frequency tracking systems are generally quite expensive and can vary in accuracy due to interference, equipment quality or other environmental factors. Due to these limiting factors of the technology, many businesses today find it hard to justify investing in RFID tracking technologies to improve the safety, efficiency and security of their working environments. The aim of this project was to provide a budget RFID tracking system that was capable of tracking a person or object through an indoor environment. To minimize the cost of the RFID tracking system, the components of the system were built from existing electronic equipment and hardware. The software was also written to minimize licensing and support fees allowing a cost effective budget RFID tracking system to be developed. The tracking system consists of a tag, reader nodes and a PC reader which utilize synapse RF 100 engines with python scripts embedded on to the chips. The tracking system software operates through a web portal utilizing web technologies such as HTML, JavaScript and PHP to allow the tags location to be represented on a two dimensional map using scalable vector graphics. During development of the system a new trilateration algorithm was developed and used convert the signals received from the tag to a virtual position on the map correlating to the actual physical position of the tag. A unique contribution of this system is the low cost of building which we estimate as less than £200 UK sterling for a five node system.

scholarly journals Modelling and design of a two axis small scale solar tracking system for an ecological small scale house model

2018 ◽  
Vol 210 ◽  
pp. 02001
Author(s):  
Philippe Dondon ◽  
Pascal Gauterie ◽  
Renaud Charlet
Keyword(s):  
Power Generation ◽  
Sustainable Development ◽  
Mathematical Description ◽  
Tracking System ◽  
Solar Panel ◽  
Small Scale ◽  
Power Ratio ◽  
Tracking Systems ◽  
Behaviour Modelling ◽  
Solar Tracking

Nowadays power generation is one of the greatest challenges of humanity in the framework of Sustainable Development. For example, as it is globally accepted sun tracking systems allows improvement of solar panel power ratio. In order to illustrate this concept, this paper presents the design and a behaviour modelling of a two axis small scale system for future didactical applications. The principle of tracking is described. Mathematical description is done and a mixed SPICE modelling of the system, including geometrical, optical, electronic linear and non-linear aspects is built. Simulations results are analysed. Practical mechanical and electronic designs are detailed, before conclusion. This small scale solar tracking system is now installed in a eco-friendly small scale house model.

A Novelty Control Strategy for the Photovoltaic Supercapacitor and Battery Hybrids Storage System

2011 ◽  
Vol 301-303 ◽  
pp. 1522-1527
Author(s):  
Yi Yuan ◽  
Mohamed Machmoum ◽  
Salvy Bourguet ◽  
Nicolas Amelon
Keyword(s):  
Control Strategy ◽  
Storage System ◽  
Pv System ◽  
Photovoltaic Panel ◽  
Pv Systems ◽  
Power Product ◽  
Pv Panel ◽  
The Cost ◽  
Large Burst ◽  
Reasonable Energy

Most photovoltaic (PV) systems can supply continuous energy by using storage applications. Generally, the battery is employed for finishing this aim. The expense of the battery occupies a large part in the whole PV system. However, the constant variations of both photovoltaic panel power product and load power demand reduce the life of the battery. At the same time, for providing several large burst power demands generated by the motor based application startup, the sizing of battery should be enlarged. Both of them increase the cost of the PV system. Therefore, supercapacitor is integrated into this system. With a reasonable energy control strategy among the PV panel, supercapacitor and battery, the battery’s life could be prolonged and its size can be reduced. A PV system with hybrid storage applications is established in the Matlab/Simulink. Two different loads and weather situations are used to prove the efficiency of this control strategy.

Output Power Enhancement of Solar PV Panel Using Solar Tracking System

2019 ◽  
Vol 12 (1) ◽  
pp. 45-49
Author(s):  
Abhishek Kumar Tripathi ◽  
Mangalpady Aruna ◽  
Ch. S.N. Murthy
Keyword(s):  
Solar Radiation ◽  
Output Power ◽  
Tracking System ◽  
The Sun ◽  
Solar Pv ◽  
Design Development ◽  
Pv Panel ◽  
Solar Tracking ◽  
Power Enhancement ◽  
Panel Surface

Solar Photovoltaic (PV) energy conversion has gained much attention nowadays. The output power of PV panel depends on the condition under which the panel is working, such as solar radiation, ambient temperature, dust, wind speed and humidity. The amount of falling sunlight on the panel surface (i.e., solar radiation) directly affects its output power. In order to maximize the amount of falling sunlight on the panel surface, a solar tracking PV panel system is introduced. This paper describes the design, development and fabrication of the solar PV panel tracking system. The designed solar tracking system is able to track the position of the sun throughout the day, which allows more sunlight falling on the panel surface. The experimental results show that there was an enhancement of up to a 64.72% in the output power of the PV panel with reference to the fixed orientation PV panel. Further, this study also demonstrates that the full load torque of the tracking system would be much higher than the obtained torque, which is required to track the position of the sun. This propounds, that the proposed tracking system can also be used for a higher capacity PV power generation system.

Using Homer Software for Cost Analysis of Stand-Alone Power Generation for Small Scale Industry in Nigeria: A Case Study Lumatec Aluminium Products

2021 ◽  
Vol 2 (2) ◽  
pp. 90-102
Author(s):  
Luqman Raji ◽  
Zhigilla Y.I ◽  
Wadai J
Keyword(s):  
Power Generation ◽  
Cost Analysis ◽  
Oil And Gas ◽  
Cost Effective ◽  
Small Scale ◽  
Pv System ◽  
Rural And Urban ◽  
Small Scale Industry ◽  
The Cost ◽  
Small Scale Industries

Nigeria is one of developing countries in the world that experience shortage of electricity for her economic and social development. In Nigeria, most of the small-scale industries use diesel/petrol-based systems to generate their electricity. However, due to the cost fluctuation of oil and gas fuel, an alternative power generation should be considered. This paper targets to examine the cost analysis of system for supplying electricity to LUMATEC Aluminium products shop in Mubi, Adamawa state Nigeria. Hybrid Optimization Model for Electric Renewable (HOMER) is used as a tool for cost analysis. The scenario consider in this study was only stand-alone with battery system. Results revealed that the system have 10kW PV with cost of electricity (COE) of $0.312/kW. The initial capital cost and total net present cost (NPC) are $21.775 and $26.148 respectively, with payback period of 5.8years. In conclusion, this study provides the solution of power supply to the small-scale industries at cost effective and available throughout the year and it is feasible to solve the small-scale industries, rural and urban electricity supplying in this country (Nigeria). It is recommended that Nigerian Government & Law makers should promotes the use of standalone PV system for domestic and small-scale industry by providing financial assistance through soft loans, subsides and grants.

Sign in / Sign up

Export Citation Format

Share Document