scholarly journals Constructing a Dual-Function Surface by Microcasting and Nanospraying for Efficient Drag Reduction and Potential Antifouling Capabilities

Micromachines ◽  
2019 ◽  
Vol 10 (7) ◽  
pp. 490 ◽  
Author(s):  
Liguo Qin ◽  
Mahshid Hafezi ◽  
Hao Yang ◽  
Guangneng Dong ◽  
Yali Zhang
Keyword(s):  
Contact Angle ◽  
Drag Reduction ◽  
High Speed ◽  
Contact Angle Hysteresis ◽  
Dual Function ◽  
Water Contact ◽  
Shark Skin ◽  
Biomimetic Surface ◽  
Self Cleaning ◽  
Living Organisms

To improve the drag-reducing and antifouling performance of marine equipment, it is indispensable to learn from structures and materials that are found in nature. This is due to their excellent properties, such as intelligence, microminiaturization, hierarchical assembly, and adaptability. Considerable interest has arisen in fabricating surfaces with various types of biomimetic structures, which exhibit promising and synergistic performances similar to living organisms. In this study, a dual bio-inspired shark-skin and lotus-structure (BSLS) surface was developed for fabrication on commercial polyurethane (PU) polymer. Firstly, the shark-skin pattern was transferred on the PU by microcasting. Secondly, hierarchical micro- and nanostructures were introduced by spraying mesoporous silica nanospheres (MSNs). The dual biomimetic substrates were characterized by scanning electron microscopy, water contact angle characterization, antifouling, self-cleaning, and water flow impacting experiments. The results revealed that the BSLS surface exhibited dual biomimetic features. The micro- and nano-lotus-like structures were localized on a replicated shark dermal denticle. A contact angle of 147° was observed on the dual-treated surface and the contact angle hysteresis was decreased by 20% compared with that of the nontreated surface. Fluid drag was determined with shear stress measurements and a drag reduction of 36.7% was found for the biomimetic surface. With continuous impacting of high-speed water for up to 10 h, the biomimetic surface stayed superhydrophobic. Material properties such as inhibition of protein adsorption, mechanical robustness, and self-cleaning performances were evaluated, and the data indicated these behaviors were significantly improved. The mechanisms of drag reduction and self-cleaning are discussed. Our results indicate that this method is a potential strategy for efficient drag reduction and antifouling capabilities.

scholarly journals Biomimetics inspired surfaces for drag reduction and oleophobicity/philicity

2011 ◽  
Vol 2 ◽  
pp. 66-84 ◽  
Author(s):  
Bharat Bhushan
Keyword(s):  
Contact Angle ◽  
Fluid Flow ◽  
Drag Reduction ◽  
Organic Contaminants ◽  
Contact Angle Hysteresis ◽  
Hierarchical Structures ◽  
Aquatic Animal ◽  
Plant Leaves ◽  
Reduction Efficiency ◽  
Self Cleaning

The emerging field of biomimetics allows one to mimic biology or nature to develop nanomaterials, nanodevices, and processes which provide desirable properties. Hierarchical structures with dimensions of features ranging from the macroscale to the nanoscale are extremely common in nature and possess properties of interest. There are a large number of objects including bacteria, plants, land and aquatic animals, and seashells with properties of commercial interest. Certain plant leaves, such as lotus (Nelumbo nucifera) leaves, are known to be superhydrophobic and self-cleaning due to the hierarchical surface roughness and presence of a wax layer. In addition to a self-cleaning effect, these surfaces with a high contact angle and low contact angle hysteresis also exhibit low adhesion and drag reduction for fluid flow. An aquatic animal, such as a shark, is another model from nature for the reduction of drag in fluid flow. The artificial surfaces inspired from the shark skin and lotus leaf have been created, and in this article the influence of structure on drag reduction efficiency is reviewed. Biomimetic-inspired oleophobic surfaces can be used to prevent contamination of the underwater parts of ships by biological and organic contaminants, including oil. The article also reviews the wetting behavior of oil droplets on various superoleophobic surfaces created in the lab.

scholarly journals Self-Cleaning Polyester Fabric Prepared with TiOF2 and Hexadecyltrimethoxysilane

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 387
Author(s):  
Euigyung Jeong ◽  
Heeju Woo ◽  
Yejin Moon ◽  
Dong Yun Lee ◽  
Minjung Jung ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Contact Angle ◽  
Treatment Method ◽  
Polyester Fabric ◽  
Anatase Tio2 ◽  
The Self ◽  
Water Contact ◽  
Direct Fluorination ◽  
Tomato Ketchup ◽  
Self Cleaning

In this study, self-cleaning polyester (PET) fabrics were prepared using TiOF2 and hexadecyltrimethoxysilane(HDS) treatment. TiOF2 was synthesized via direct fluorination of a precursor TiO2 at various reaction temperatures. The prepared PET fabrics had superior photocatalytic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics under UV and sunlight with 98% decomposition of methylene blue. TiOF2/HDS-treated PET fabrics also had superior superhydrophobic self-cleaning properties compared with anatase TiO2/HDS-treated PET fabrics with a 161° water contact angle and 6° roll-off angle. After the self-cleaning tests of the non-dyed TiOF2/HDS-treated PET fabrics, we prepared dyed TiOF2/HDS-treated PET fabrics to test practical aspects of the treatment method. These PET fabrics were barely stained by tomato ketchup; even when stained, they could be self-cleaned within 4 h. These results suggest that practical self-cleaning PET fabrics with superhydrophobicity and photocatalytic degradation could be prepared using TiOF2/HDS-treatment.

Preparation of TiO2–SiO2 Hybrid Nanosols Coated Flame-Retardant Polyester Fabric Possessing Dual Contradictory Characteristics of Superhydrophobicity and Self Cleaning Ability

2020 ◽  
Vol 20 (3) ◽  
pp. 1780-1789 ◽  
Author(s):  
Priyanka Katiyar ◽  
Shraddha Mishra ◽  
Anurag Srivastava ◽  
N. Eswara Prasad
Keyword(s):  
Electron Microscopy ◽  
Contact Angle ◽  
Flame Retardant ◽  
Protective Clothing ◽  
Sol Gel ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Water Contact ◽  
Vis Spectroscopy ◽  
Self Cleaning

TiO2, SiO2 and their hybrid nanocoatings are prepared on inherent flame retardant textile substrates from titanium(IV)iso-proproxide (TTIP) and tetraethoxysilane (TEOS) precursors using a sol–gel process followed by hydrothermal treatment. The coated samples are further functionalized by hexadecyltrimethoxysilane (HDTMS) to impart superhydrophobicity. Sample characterization of the nanosols, nanoparticles and coated samples are investigated using, X-ray diffractometer, transmission electron microscopy, scanning electron microscopy, UV-Vis spectroscopy, contact angle measurement. Stain degradation test under mild UV irradiation shows almost 54% degradation of coffee stain within 4 hours measured by Spectrophotometer. UV-Vis Absorption Spectroscopy demonstrates complete degradation of methyl orange colorant within 3 hours. Hybrid nanosol coated and HDTMS modified inherent flame retardant polyester surfaces show apparent water contact angle as ~145°, which is much closer to proximity of superhydrophobic surfaces. Thus, the novelty of present work is, by using sol–gel technique, a bi-functional textile surface has been developed which qualifies the very specific requirements of protective clothing like self-cleaning property (imparted by TiO2 nanoparticles) and superhydrophobicity (imparted by SiO2 nanoparticles and further surface modification by HDTMS), which are entirely contradictory in nature, in a single fabric itself. Thus developed textile surfaces also possess the other attributes of protective clothing like flame retardancy and air permeability.

scholarly journals A Simple Method to Create Superhydrophobic Aluminium Surfaces

2012 ◽  
Vol 706-709 ◽  
pp. 2874-2879 ◽  
Author(s):  
R. Jafari ◽  
Masoud Farzaneh
Keyword(s):  
Contact Angle ◽  
Stearic Acid ◽  
Synergistic Effects ◽  
Low Cost ◽  
Contact Angle Hysteresis ◽  
Spray Coating ◽  
Superhydrophobic Surfaces ◽  
Water Contact ◽  
Simple Method ◽  
Static Contact

Superhydrophobic surfaces were prepared using a very simple and low-cost method by spray coating. A high static water contact angle of about 154° was obtained by deposition of stearic acid on an aluminium alloy. However, this coating demonstrated a high contact angle hysteresis (~ 30º). On the other hand, superhydrophobic surfaces with a static contact angle of about 162º and 158º, and a low contact angle hysteresis of about 3º and 5º were respectively obtained by incorporating nanoparticles of SiO2and CaCO3in stearic acid. The excellent resulting hydrophobicity is attributed to the synergistic effects of micro/nanoroughness and low surface energy. A study of the wettability of these surfaces at temperatures ranging from 20 to-10 °C showed that the superhydrophobic surface becomes rather hydrophobic at supercooled temperatures.

scholarly journals One-Step Preparation of Durable Super-Hydrophobic MSR/SiO2 Coatings by Suspension Air Spraying

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 677 ◽  
Author(s):  
Zhengyong Huang ◽  
Wenjie Xu ◽  
Yu Wang ◽  
Haohuan Wang ◽  
Ruiqi Zhang ◽  
...  
Keyword(s):  
Contact Angle ◽  
Adhesion Strength ◽  
Contact Angle Hysteresis ◽  
Surface Hardness ◽  
Hierarchical Structures ◽  
Hydrophobic Surface ◽  
Water Contact ◽  
Hydrophobic Coating ◽  
Mechanical Durability ◽  
One Step

In this study, we develop a facial one-step approach to prepare durable super-hydrophobic coatings on glass surfaces. The hydrophobic characteristics, corrosive liquid resistance, and mechanical durability of the super-hydrophobic surface are presented. The as-prepared super-hydrophobic surface exhibits a water contact angle (WCA) of 157.2° and contact angle hysteresis of 2.3°. Mico/nano hierarchical structures and elements of silicon and fluorine is observed on super-hydrophobic surfaces. The adhesion strength and hardness of the surface are determined to be 1st level and 4H, respectively. The coating is, thus, capable of maintaining super-hydrophobic state after sand grinding with a load of 200 g and wear distances of 700 mm. The rough surface retained after severe mechanical abrasion observed by atomic force microscope (AFM) microscopically proves the durable origin of the super-hydrophobic coating. Results demonstrate the feasibility of production of the durable super-hydrophobic coating via enhancing its adhesion strength and surface hardness.

scholarly journals A Superhydrophilic Aluminum Surface with Fast Water Evaporation Based on Anodic Alumina Bundle Structures via Anodizing in Pyrophosphoric Acid

Materials ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 3497 ◽  
Author(s):  
Daiki Nakajima ◽  
Tatsuya Kikuchi ◽  
Taiki Yoshioka ◽  
Hisayoshi Matsushima ◽  
Mikito Ueda ◽  
...  
Keyword(s):  
Contact Angle ◽  
Oxide Film ◽  
High Speed ◽  
Porous Alumina ◽  
Aluminum Surface ◽  
Water Evaporation ◽  
Water Contact ◽  
Initial Stage ◽  
Angle Measuring ◽  
Pyrophosphoric Acid

A superhydrophilic aluminum surface with fast water evaporation based on nanostructured aluminum oxide was fabricated via anodizing in pyrophosphoric acid. Anodizing aluminum in pyrophosphoric acid caused the successive formation of a barrier oxide film, a porous oxide film, pyramidal bundle structures with alumina nanofibers, and completely bent nanofibers. During the water contact angle measurements at 1 s after the water droplet was placed on the anodized surface, the contact angle rapidly decreased to less than 10°, and superhydrophilic behavior with the lowest contact angle measuring 2.0° was exhibited on the surface covered with the pyramidal bundle structures. As the measurement time of the contact angle decreased to 200–33 ms after the water placement, although the contact angle slightly increased in the initial stage due to the formation of porous alumina, at 33 ms after the water placement, the contact angle was 9.8°, indicating that superhydrophilicity with fast water evaporation was successfully obtained on the surface covered with the pyramidal bundle structures. We found that the shape of the pyramidal bundle structures was maintained in water without separation by in situ high-speed atomic force microscopy measurements.

scholarly journals Preparation of Superhydrophobic Steel Surfaces with Chemical Stability and Corrosion

Coatings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 398 ◽  
Author(s):  
Chongwei Du ◽  
Xiaoyan He ◽  
Feng Tian ◽  
Xiuqin Bai ◽  
Chengqing Yuan
Keyword(s):  
Contact Angle ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Chemical Stability ◽  
Superhydrophobic Surface ◽  
Contact Angle Hysteresis ◽  
Water Contact ◽  
Simple Method ◽  
Q235 Carbon Steel ◽  
Steel Surfaces

Corrosion seriously limits the long-term application of Q235 carbon steel. Herein, a simple fabrication method was used to fabricate superhydrophobic surfaces on Q235 carbon steel for anticorrosion application. The combination of structure and the grafted low-surface-energy material contributed to the formation of superhydrophobic steel surfaces, which exhibited a water contact angle of 161.6° and a contact angle hysteresis of 0.8°. Meanwhile, the as-prepared superhydrophobic surface showed repellent toward different solutions with pH ranging from 1 to 14, presenting excellent chemical stability. Moreover, the acid corrosive liquid (HCl solution with pH of 1) maintained sphere-like shape on the as-prepared superhydrophobic surface at room temperature, indicating superior corrosion resistance. This work provides a simple method to fabricate superhydrophobic steel surfaces with chemical stability and corrosion resistance.

scholarly journals Hydrophobic zinc-tellurite glass system as self-cleaning vehicle: Interplay amid SiO2 and TeO2

2018 ◽  
Vol 14 ◽  
pp. 492-494
Author(s):  
Siti Nur Nazhirah Mazlan ◽  
Ramli Arifin ◽  
Sib Krishna Ghoshal
Keyword(s):  
Contact Angle ◽  
Hydrophobic Interactions ◽  
Hydrophobic Surface ◽  
Cost Effective ◽  
Underlying Mechanism ◽  
Industrial Applications ◽  
Glass System ◽  
Preparation Technique ◽  
Water Contact ◽  
Self Cleaning

Cost-effective, environmental amiable and maintenance free glasses with improved hydrophobic activity are needed for diverse industrial applications. Pollutant and dirt depositions on glasses that cause the visual obscurity and damages of the cultural heritages require inhibition. The underlying mechanism of hydrophobic interactions assisted self-cleaning traits of glass is poorly understood. It has been shown that excellent hydrophobic glass with water contact angle (WCA) above 90o and very low surface wettability can be achieved by controlling the surface roughness (SR), where liquid droplets remain perfectly spherical on such surfaces (literally without touching) before being self-cleaned (rolls off). Moreover, selection and optimization of constituent materials composition as well as the preparation technique play a significant role towards such success. Most of the previous attempts for the self-cleaning glass preparation were made via coating strategy on glass surface. Yet, preparation of super-hydrophobic glass surfaces with self-cleaning attributes remains an open challenge. Driven by this idea, we prepared a new glass system of composition (80 x) TeO2-20ZnO-(x)SiO2 (x = 0, 0.03, 0.06, 0.09 and 0.12 mol%) by melt-quenching method, where the proportions of SiO2 and TeO2 were interplayed. As-prepared samples (thin pellet without coating) were characterized using atomic force microscopy (AFM) and video contact angle (VCA) measurements. The effects of SiO2 concentration on the glass SR, surface energy and hydrophobic properties were evaluated. Glass 0.06 mol% of SiO2 revealed the optimal WCA of 112.39º and SR of 7.806 nm. It was established that a trade-off between SiO2 and TeO2 contents in the studied glasses could produce super-hydrophobic surface (WCA over 90º), leading to great opportunities for diverse self-cleaning applications.

Sign in / Sign up

Export Citation Format

Share Document