scholarly journals Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

Micromachines ◽  
2019 ◽  
Vol 10 (3) ◽  
pp. 192 ◽  
Author(s):  
Prithviraj Mukherjee ◽  
Federico Nebuloni ◽  
Hua Gao ◽  
Jian Zhou ◽  
Ian Papautsky
Keyword(s):  
Soft Lithography ◽  
State Of The Art ◽  
Low Cost ◽  
Pharmaceutical Research ◽  
Microfluidic Devices ◽  
Ambient Light ◽  
Glass Slides ◽  
Edge Bead ◽  
Time Savings ◽  
Dry Film

Fabrication of microfluidic devices by soft lithography is by far the most popular approach due to simplicity and low cost. In this approach PDMS (polydimethylsiloxane) is cast on a photoresist master to generate replicas that are then sealed against glass slides using oxygen plasma. In this work, we demonstrated fabrication of soft photolithography masters using lamination of ADEX dry film as an alternative to the now classic SU-8 resist masters formed by spin coating. Advantages of using ADEX dry film include the easily-achievable uniform thickness without edge bead; simplicity of the process with significant time savings due to non-sticky nature of the film; and fewer health concerns due to less toxic developing solution and antimony-free composition. As we demonstrate, the process can be performed in a low-cost improvised fabrication room in ambient light, in place of a conventional yellow-light cleanroom environment. We believe this approach holds the promise of delivering state-of-the-art microfluidic techniques to the broad field of biomedical and pharmaceutical research.

A Very Low-Cost, Labor-Efficient, and Simple Method to Block Scattered Ultraviolet Light in PDMS Microfluidic Devices by Inserting Aluminum Foil Strips

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
Shuo Wang ◽  
Peter Shankles ◽  
Scott Retterer ◽  
Yong Tae Kang ◽  
Chang Kyoung Choi
Keyword(s):  
Soft Lithography ◽  
Uv Light ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Aluminum Foil ◽  
Material Synthesis ◽  
Simple Method ◽  
Micro Particles ◽  
Complex Shapes ◽  
The Cost

Abstract Opto-microfluidic methods have advantages for manufacturing complex shapes or structures of micro particles/hydrogels. Most of these microfluidic devices are made of polydimethylsiloxane (PDMS) by soft lithography because of its flexibility of designing and manufacturing. However, PDMS scatters ultraviolet (UV) light, which polymerizes the photocrosslinkable materials at undesirable locations and clogs the microfluidic devices. A fluorescent dye has previously been employed to absorb the scattered UV light and shift its wavelength to effectively solve this issue. However, this method is limited due to the cost of the materials (tens of dollars per microchip), the time consumed on synthesizing the fluorescent material and verifying its quality (two to three days). More importantly, significant expertise on material synthesis and characterization is required for users of the opto-microfluidic technique. The cost of preliminary testing on multiple iterations of different microfluidic chip designs would also be excessive. Alternatively, with a delicate microchannel design, we simply inserted aluminum foil strips (AFS) inside the PDMS device to block the scattered UV light. By using this method, the UV light was limited to the exposure region so that the opto-microfluidic device could consistently generate microgels longer than 6 h. This is a nearly cost- and labor-free method to solve this issue.

scholarly journals Micropipette-Based Microfluidic Device for Monodisperse Microbubbles Generation

Micromachines ◽  
2018 ◽  
Vol 9 (8) ◽  
pp. 387
Author(s):  
Carlos Toshiyuki Matsumi ◽  
Wilson José da Silva ◽  
Fábio Kurt Schneider ◽  
Joaquim Miguel Maia ◽  
Rigoberto E. M. Morales ◽  
...  
Keyword(s):  
Electric Fields ◽  
Microfluidic Device ◽  
Soft Lithography ◽  
Low Cost ◽  
Characteristic Curve ◽  
Microfluidic Devices ◽  
Average Diameter ◽  
Internal Diameter ◽  
Medical Diagnostic ◽  
Average Size

Microbubbles have various applications including their use as carrier agents for localized delivery of genes and drugs and in medical diagnostic imagery. Various techniques are used for the production of monodisperse microbubbles including the Gyratory, the coaxial electro-hydrodynamic atomization (CEHDA), the sonication methods, and the use of microfluidic devices. Some of these techniques require safety procedures during the application of intense electric fields (e.g., CEHDA) or soft lithography equipment for the production of microfluidic devices. This study presents a hybrid manufacturing process using micropipettes and 3D printing for the construction of a T-Junction microfluidic device resulting in simple and low cost generation of monodisperse microbubbles. In this work, microbubbles with an average size of 16.6 to 57.7 μm and a polydispersity index (PDI) between 0.47% and 1.06% were generated. When the device is used at higher bubble production rate, the average diameter was 42.8 μm with increased PDI of 3.13%. In addition, a second-order polynomial characteristic curve useful to estimate micropipette internal diameter necessary to generate a desired microbubble size is presented and a linear relationship between the ratio of gaseous and liquid phases flows and the ratio of microbubble and micropipette diameters (i.e., Qg/Ql and Db/Dp) was found.

scholarly journals A rapid-prototyped moulding system towards optimised scalable fabrication of elastomeric microfluidic devices

2021 ◽  
Author(s):  
Christine Poon ◽  
Albert Fahrenbach
Keyword(s):  
3D Printing ◽  
Microfluidic Device ◽  
Lean Manufacturing ◽  
Soft Lithography ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Petri Dish ◽  
Device Fabrication ◽  
Alternative Techniques ◽  
Optimisation Techniques

3D printing and makerspace technologies are increasingly explored as alternative techniques to soft lithography for making microfluidic devices, and for their potential to segue towards scalable commercial fabrication. Here we considered the optimal application of current benchtop 3D printing for microfluidic device fabrication through the lens of lean manufacturing and present a straightforward but robust rapid prototyped moulding system that enables easy estimation of more precise quantities of polydimethylsiloxane (PDMS) required per device to reduce waste and importantly, making devices with better defined depths and volumes for (i) modelling gas exchange and (ii) fabrication consistency as required for quality-controlled production. We demonstrate that this low-cost moulding step can enable a 40 – 300% reduction in the amount of PDMS required for making individual devices compared to the established method of curing approximately 30 grams of PDMS prepolymer overlaid on a 4” silicon wafer master in a standard plastic petri dish. Other process optimisation techniques were also investigated and are recommended as readily implementable changes to current laboratory and foundry-level microfluidic device fabrication protocols for making devices either out of PDMS or other elastomers. Simple calculators are provided as a step towards more streamlined, software controlled and automated design-to-fabrication workflows for both custom and scalable lean manufacturing of microfluidic devices.

scholarly journals Polycarbonate Masters for Soft Lithography

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1392
Author(s):  
Filippo Amadeo ◽  
Prithviraj Mukherjee ◽  
Hua Gao ◽  
Jian Zhou ◽  
Ian Papautsky
Keyword(s):  
Soft Lithography ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Silicon Substrates ◽  
Large Area ◽  
Aspect Ratios ◽  
Rectangular Channels ◽  
Wide Range ◽  
Long Term Preservation

Fabrication of microfluidic devices by soft lithography is by far the most popular approach due to its simplicity and low cost. The approach relies on casting of elastomers, such as polydimethylsiloxane (PDMS), on masters fabricated from photoresists on silicon substrates. These masters, however, can be expensive, complicated to fabricate, and fragile. Here we describe an optimized replica molding approach to preserve the original masters by heat molding of polycarbonate (PC) sheets on PDMS molds. The process is faster and simpler than previously reported methods and does not result in a loss of resolution or aspect ratio for the features. The generated PC masters were used to successfully replicate a wide range of microfluidic devices, including rectangular channels with aspect ratios from 0.025 to 7.3, large area spiral channels, and micropost arrays with 5 µm spacing. Moreover, fabrication of rounded features, such as semi-spherical microwells, was possible and easy. Quantitative analysis of the replicated features showed variability of <2%. The approach is low cost, does not require cleanroom setting or hazardous chemicals, and is rapid and simple. The fabricated masters are rigid and survive numerous replication cycles. Moreover, damaged or missing masters can be easily replaced by reproduction from previously cast PDMS replicas. All of these advantages make the PC masters highly desirable for long-term preservation of soft lithography masters for microfluidic devices.

scholarly journals Study of Microchannels Fabricated Using Desktop Fused Deposition Modeling Systems

Micromachines ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 14
Author(s):  
Muhammad Asif Ali Rehmani ◽  
Swapna A. Jaywant ◽  
Khalid Mahmood Arif
Keyword(s):  
Soft Lithography ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Low Cost ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
Micro Features ◽  
Helical Microchannel

Microfluidic devices are used to transfer small quantities of liquid through micro-scale channels. Conventionally, these devices are fabricated using techniques such as soft-lithography, paper microfluidics, micromachining, injection moulding, etc. The advancement in modern additive manufacturing methods is making three dimensional printing (3DP) a promising platform for the fabrication of microfluidic devices. Particularly, the availability of low-cost desktop 3D printers can produce inexpensive microfluidic devices in fast turnaround times. In this paper, we explore fused deposition modelling (FDM) to print non-transparent and closed internal micro features of in-plane microchannels (i.e., linear, curved and spiral channel profiles) and varying cross-section microchannels in the build direction (i.e., helical microchannel). The study provides a comparison of the minimum possible diameter size, the maximum possible fluid flow-rate without leakage, and absorption through the straight, curved, spiral and helical microchannels along with the printing accuracy of the FDM process for two low-cost desktop printers. Moreover, we highlight the geometry dependent printing issues of microchannels, pressure developed in the microchannels for complex geometry and establish that the profiles in which flowrate generates 4000 Pa are susceptible to leakages when no pre or post processing in the FDM printed parts is employed.

Maskless Photolithography Using an Epifluorescent Microscope for Microfluidic Applications

2011 ◽  
Author(s):  
MacCallister Higgins ◽  
Emil J. Geiger
Keyword(s):  
Capital Investment ◽  
Uv Light ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Direct Write ◽  
On Demand ◽  
Fluorescent Microscope ◽  
The Future ◽  
Time Required ◽  
Dry Film

We present a technique for fabricating molds suitable for casting PDMS based microfluidic devices using equipment readily available to most microfluidic researchers, namely an epi-fluorescent microscope. By focusing the UV light emitted from the Hg arc lamp, we demonstrate the ability to direct-write photoresist features with a minimum resolution of 45 μm. A major advantage of this technique is its low-cost, both in terms of capital investment and on-going expenditures. Furthermore, by using a motorized stage, we can quickly fabricate a design on demand, eliminating the need, cost, and time required for a photomask. We demonstrate this technique using dry-film resist, due to its low-cost, ease of application, and less stringent safety protocols. In the future, we plan to expand our efforts to higher resolution photoresists such as SU-8.

scholarly journals Soft tubular microfluidics for 2D and 3D applications

2017 ◽  
Vol 114 (40) ◽  
pp. 10590-10595 ◽  
Author(s):  
Wang Xi ◽  
Fang Kong ◽  
Joo Chuan Yeo ◽  
Longteng Yu ◽  
Surabhi Sonam ◽  
...  
Keyword(s):  
Cross Sections ◽  
Soft Lithography ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Building Blocks ◽  
Microfluidic Chips ◽  
Microfluidic Systems ◽  
Cross Sectional ◽  
2D And 3D ◽  
3D Applications

Microfluidics has been the key component for many applications, including biomedical devices, chemical processors, microactuators, and even wearable devices. This technology relies on soft lithography fabrication which requires cleanroom facilities. Although popular, this method is expensive and labor-intensive. Furthermore, current conventional microfluidic chips precludes reconfiguration, making reiterations in design very time-consuming and costly. To address these intrinsic drawbacks of microfabrication, we present an alternative solution for the rapid prototyping of microfluidic elements such as microtubes, valves, and pumps. In addition, we demonstrate how microtubes with channels of various lengths and cross-sections can be attached modularly into 2D and 3D microfluidic systems for functional applications. We introduce a facile method of fabricating elastomeric microtubes as the basic building blocks for microfluidic devices. These microtubes are transparent, biocompatible, highly deformable, and customizable to various sizes and cross-sectional geometries. By configuring the microtubes into deterministic geometry, we enable rapid, low-cost formation of microfluidic assemblies without compromising their precision and functionality. We demonstrate configurable 2D and 3D microfluidic systems for applications in different domains. These include microparticle sorting, microdroplet generation, biocatalytic micromotor, triboelectric sensor, and even wearable sensing. Our approach, termed soft tubular microfluidics, provides a simple, cheaper, and faster solution for users lacking proficiency and access to cleanroom facilities to design and rapidly construct microfluidic devices for their various applications and needs.

scholarly journals A rapid-prototyped moulding system towards optimised scalable fabrication of elastomeric microfluidic devices

2021 ◽  
Author(s):  
Christine Poon ◽  
Albert Fahrenbach
Keyword(s):  
3D Printing ◽  
Microfluidic Device ◽  
Lean Manufacturing ◽  
Soft Lithography ◽  
Low Cost ◽  
Microfluidic Devices ◽  
Petri Dish ◽  
Device Fabrication ◽  
Alternative Techniques ◽  
Optimisation Techniques

3D printing and makerspace technologies are increasingly explored as alternative techniques to soft lithography for making microfluidic devices, and for their potential to segue towards scalable commercial fabrication. Here we considered the optimal application of current benchtop 3D printing for microfluidic device fabrication through the lens of lean manufacturing and present a straightforward but robust rapid prototyped moulding system that enables easy estimation of more precise quantities of polydimethylsiloxane (PDMS) required per device to reduce waste and importantly, making devices with better defined depths and volumes for (i) modelling gas exchange and (ii) fabrication consistency as required for quality-controlled production. We demonstrate that this low-cost moulding step can enable a 40 – 300% reduction in the amount of PDMS required for making individual devices compared to the established method of curing approximately 30 grams of PDMS prepolymer overlaid on a 4” silicon wafer master in a standard plastic petri dish. Other process optimisation techniques were also investigated and are recommended as readily implementable changes to current laboratory and foundry-level microfluidic device fabrication protocols for making devices either out of PDMS or other elastomers. Simple calculators are provided as a step towards more streamlined, software controlled and automated design-to-fabrication workflows for both custom and scalable lean manufacturing of microfluidic devices.

scholarly journals UV Inscription and Pressure Induced Long-Period Gratings through 3D Printed Amplitude Masks

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1977
Author(s):  
Ricardo Oliveira ◽  
Liliana M. Sousa ◽  
Ana M. Rocha ◽  
Rogério Nogueira ◽  
Lúcia Bilro
Keyword(s):  
State Of The Art ◽  
Low Cost ◽  
Resonance Wavelength ◽  
Complex Structures ◽  
Pressing Method ◽  
Long Period ◽  
Long Period Gratings ◽  
3D Printed ◽  
Mechanical Pressing ◽  
First Time

In this work, we demonstrate for the first time the capability to inscribe long-period gratings (LPGs) with UV radiation using simple and low cost amplitude masks fabricated with a consumer grade 3D printer. The spectrum obtained for a grating with 690 µm period and 38 mm length presented good quality, showing sharp resonances (i.e., 3 dB bandwidth < 3 nm), low out-of-band loss (~0.2 dB), and dip losses up to 18 dB. Furthermore, the capability to select the resonance wavelength has been demonstrated using different amplitude mask periods. The customization of the masks makes it possible to fabricate gratings with complex structures. Additionally, the simplicity in 3D printing an amplitude mask solves the problem of the lack of amplitude masks on the market and avoids the use of high resolution motorized stages, as is the case of the point-by-point technique. Finally, the 3D printed masks were also used to induce LPGs using the mechanical pressing method. Due to the better resolution of these masks compared to ones described on the state of the art, we were able to induce gratings with higher quality, such as low out-of-band loss (0.6 dB), reduced spectral ripples, and narrow bandwidths (~3 nm).

Sign in / Sign up

Export Citation Format

Share Document