scholarly journals Effects of Al2O3 Addition on the Microstructure and Properties of CoCr Alloys

Metals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 1074 ◽  
Author(s):  
Qin Hong ◽  
Peikang Bai ◽  
Jianhong Wang
Keyword(s):  
Structural Characteristics ◽  
Biological Properties ◽  
Elemental Distribution ◽  
Cobalt Chromium ◽  
X Ray ◽  
Al2o3 Addition ◽  
Columnar Grains ◽  
Alloy Microstructure ◽  
Cocr Alloy ◽  
Equiaxed Grains

Aluminum oxide (Al2O3) powder can be added to typical cobalt-chromium (CoCr) alloy powders. In the present study, we successfully prepared alloyed samples of various powder ratios by laser cladding and analyzed their microstructure and carbide structural characteristics, including the microhardness, biological properties, morphology (using scanning electron microscopy), and crystal structure (using X-ray powder diffraction). The elemental distribution was also determined by energy-dispersive X-ray spectroscopy. The results showed that an Al2O3 addition caused the alloy microstructure to change from slender columnar crystals to columnar grains that were similar in shape to equiaxed grains. In addition, Al2O3 agglomeration zones appeared, and carbide structures were altered. The mechanism of the observed performance changes was also analyzed.

scholarly journals Effects of Al2O3 Addition on the Microstructure and Properties of CoCr Alloys

2019 ◽  
Author(s):  
Qin Hong ◽  
Peikang Bai ◽  
Jianhong Wang
Keyword(s):  
Crystal Structure ◽  
Structural Characteristics ◽  
Biological Properties ◽  
Elemental Distribution ◽  
Cobalt Chromium ◽  
Al2o3 Powder ◽  
X Ray ◽  
Columnar Grains ◽  
Equiaxed Grains ◽  
Scanning Electron

In typical Cobalt-chromium (CoCr) alloys powders, aluminum oxide (Al2O3) powder can be added. In the present study, we successfully prepared alloyed samples of various powder ratios by laser cladding, and analyzed their microstructure and carbide structural characteristics, including microhardness, biological properties, morphology (using scanning electron microscopy), and crystal structure (using X-ray powder diffraction). Elemental distribution was also determined by energy-dispersive X-ray spectral analysis. The results showed that Al2O3 addition caused the alloy to change from slender columnar crystals to columnar grains similar, to equiaxed grains. In addition, Al2O3 agglomeration zones appeared, and carbide structures were altered. The mechanism of the observed performance changes was also analyzed.

scholarly journals Investigation of CoCr Dental Alloy: Example from a Casting Workflow Standpoint

Crystals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 849
Author(s):  
Dragana Majerič ◽  
Vojkan Lazić ◽  
Peter Majerič ◽  
Aleksa Marković ◽  
Rebeka Rudolf
Keyword(s):  
Chromium Oxide ◽  
Silicon Oxide ◽  
Casting Process ◽  
Elemental Content ◽  
Dental Alloy ◽  
Cobalt Chromium ◽  
Alloy Matrix ◽  
X Ray ◽  
Cocr Alloy ◽  
The One

Cobalt-chromium (CoCr) alloys have been used in dentistry for dental bridges, crowns and implants for decades. When using CoCr alloys, a number of fractures have occurred in the Dental Laboratory, both when handling the castings and after they have been placed in the patient’s mouth. It is assumed that the key cause of the resulting fractures of CoCr dental bridges is the casting process, which includes the preparation and mixing of the basic components of the CoCr dental alloy, unstable solidification and the final treatment of the tooth casting surface. The aim of this study was, therefore, to examine three castings differently prepared from the CoCr alloy. For the initial CoCr alloy, we selected the one supplied directly from the manufacturer; three test samples were CoCr alloy remelted four times in the same crucible, while the fourth sample was the remaining solidified alloy from the crucible, taken at the last remelting. Characterisation of the microstructure of all four samples was performed by optical and scanning electron microscopy equipped with an energy dispersive X-ray spectroscope and X-ray diffractometry. Microhardness measurements were also performed. The investigation revealed that the microstructure of the castings is composed of a CoCr alloy matrix with a eutectic interdendritic composition and interdendritic precipitates, which were rich in W and Mo. The two oxides were identified as chromium oxide with silicon content and chromium oxide, which originated from the CoCr alloy as casting residue. The high content of silicon in the chromium oxide can be attributed to the silicon oxide from the ceramic melting crucible, mixed in with the remains from the CoCr alloy melting. The second oxide showed a more regular elemental content for chromium oxide, mixed with a small quantity of impurities and the casting CoCr alloy. Based on this research, some recommendations were made for working with CoCr alloys in the Dental Laboratory, with the aim of reducing the risk of dental bridge fractures in the future.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

X-Ray absorption edge elemental imaging of B. thuringienis

1989 ◽  
Vol 47 ◽  
pp. 212-213
Author(s):  
R. L. Stears
Keyword(s):  
Absorption Edge ◽  
Elemental Distribution ◽  
X Rays ◽  
Differential Absorption ◽  
Synchrotron Source ◽  
High Brightness ◽  
X Ray ◽  
Elemental Imaging ◽  
Cellular Integrity ◽  
X Ray Absorption

Because of the nature of the bacterial endospore, little work has been done on analyzing their elemental distribution and composition in the intact, living, hydrated state. The majority of the qualitative analysis entailed intensive disruption and processing of the endospores, which effects their cellular integrity and composition.Absorption edge imaging permits elemental analysis of hydrated, unstained specimens at high resolution. By taking advantage of differential absorption of x-ray photons in regions of varying elemental composition, and using a high brightness, tuneable synchrotron source to obtain monochromatic x-rays, contact x-ray micrographs can be made of unfixed, intact endospores that reveal sites of elemental localization. This study presents new data demonstrating the application of x-ray absorption edge imaging to produce elemental information about nitrogen (N) and calcium (Ca) localization using Bacillus thuringiensis as the test specimen.

Preparation of cultured astrocytes for x-ray microanalysis

1989 ◽  
Vol 47 ◽  
pp. 988-989
Author(s):  
N.K.R. Smith ◽  
K.E. Hunter ◽  
P. Mobley ◽  
L.P. Felpel
Keyword(s):  
Cultured Cells ◽  
Elemental Content ◽  
Elemental Distribution ◽  
Sprague Dawley ◽  
X Ray ◽  
Cultured Astrocytes ◽  
Freeze Dried ◽  
Ultimate Objective

Electron probe energy dispersive x-ray microanalysis (XRMA) offers a powerful tool for the determination of intracellular elemental content of biological tissue. However, preparation of the tissue specimen , particularly excitable central nervous system (CNS) tissue , for XRMA is rather difficult, as dissection of a sample from the intact organism frequently results in artefacts in elemental distribution. To circumvent the problems inherent in the in vivo preparation, we turned to an in vitro preparation of astrocytes grown in tissue culture. However, preparations of in vitro samples offer a new and unique set of problems. Generally, cultured cells, growing in monolayer, must be harvested by either mechanical or enzymatic procedures, resulting in variable degrees of damage to the cells and compromised intracel1ular elemental distribution. The ultimate objective is to process and analyze unperturbed cells. With the objective of sparing others from some of the same efforts, we are reporting the considerable difficulties we have encountered in attempting to prepare astrocytes for XRMA.Tissue cultures of astrocytes from newborn C57 mice or Sprague Dawley rats were prepared and cultured by standard techniques, usually in T25 flasks, except as noted differently on Cytodex beads or on gelatin. After different preparative procedures, all samples were frozen on brass pins in liquid propane, stored in liquid nitrogen, cryosectioned (0.1 μm), freeze dried, and microanalyzed as previously reported.

X-ray mapping without STEM

1994 ◽  
Vol 52 ◽  
pp. 508-509
Author(s):  
Judith M. Brock ◽  
Max T. Otten
Keyword(s):  
Life Science ◽  
Materials Science ◽  
Chemical Elements ◽  
Full Description ◽  
Scanning System ◽  
Elemental Distribution ◽  
X Ray ◽  
Transmission Electron ◽  
Distribution Of Elements ◽  
Made In

A knowledge of the distribution of chemical elements in a specimen is often highly useful. In materials science specimens features such as grain boundaries and precipitates generally force a certain order on mental distribution, so that a single profile away from the boundary or precipitate gives a full description of all relevant data. No such simplicity can be assumed in life science specimens, where elements can occur various combinations and in different concentrations in tissue. In the latter case a two-dimensional elemental-distribution image is required to describe the material adequately. X-ray mapping provides such of the distribution of elements.The big disadvantage of x-ray mapping hitherto has been one requirement: the transmission electron microscope must have the scanning function. In cases where the STEM functionality – to record scanning images using a variety of STEM detectors – is not used, but only x-ray mapping is intended, a significant investment must still be made in the scanning system: electronics that drive the beam, detectors for generating the scanning images, and monitors for displaying and recording the images.

Synthesis and characterization of TiN / Ti / AISI 410 coatings

2018 ◽  
Vol 2 (1) ◽  
pp. 7
Author(s):  
S Chirino ◽  
Jaime Diaz ◽  
N Monteblanco ◽  
E Valderrama
Keyword(s):  
Synthesis And Characterization ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Columnar Grains ◽  
Tin Thin Films ◽  
Steel Aisi ◽  
Interacting Surfaces ◽  
Stainless Steel Aisi

The synthesis and characterization of Ti and TiN thin films of different thicknesses was carried out on a martensitic stainless steel AISI 410 substrate used for tool manufacturing. The mechanical parameters between the interacting surfaces such as thickness, adhesion and hardness were measured. By means of the scanning electron microscope (SEM) the superficial morphology of the Ti/TiN interface was observed, finding that the growth was of columnar grains and by means of EDAX the existence of titanium was verified.  Using X-ray diffraction (XRD) it was possible to observe the presence of residual stresses (~ -3.1 GPa) due to the different crystalline phases in the coating. Under X-ray photoemission spectroscopy (XPS) it was possible to observe the molecular chemical composition of the coating surface, being Ti-N, Ti-N-O and Ti-O the predominant ones.

3D Observation of Elemental Distribution of Si-Device using a Dedicated FIB/STEM System

2005 ◽  
Author(s):  
T. Yaguchi ◽  
M. Konno ◽  
T. Kamino ◽  
M. Ogasawara ◽  
K. Kaji ◽  
...  
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Three Dimensional ◽  
Elemental Distribution ◽  
Multivariate Statistical ◽  
X Ray ◽  
Sample Rotation ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Elemental Maps

Abstract A technique for preparation of a pillar shaped sample and its multi-directional observation of the sample using a focused ion beam (FIB) / scanning transmission electron microscopy (STEM) system has been developed. The system employs an FIB/STEM compatible sample rotation holder with a specially designed rotation mechanism, which allows the sample to be rotated 360 degrees [1-3]. This technique was used for the three dimensional (3D) elemental mapping of a contact plug of a Si device in 90 nm technology. A specimen containing a contact plug was shaped to a pillar sample with a cross section of 200 nm x 200 nm and a 5 um length. Elemental analysis was performed with a 200 kV HD-2300 STEM equipped with the EDAX genesis Energy dispersive X-ray spectroscopy (EDX) system. Spectrum imaging combined with multivariate statistical analysis (MSA) [4, 5] was used to enhance the weak X-ray signals of the doped area, which contain a low concentration of As-K. The distributions of elements, especially the dopant As, were successfully enhanced by MSA. The elemental maps were .. reconstructed from the maps.

scholarly journals Deep learning-based denoising for improved dose efficiency in EDX tomography of nanoparticles

Nanoscale ◽  
2021 ◽  
Author(s):  
Alexander Skorikov ◽  
Wouter Heyvaert ◽  
Wiebke Albrecht ◽  
Daan Pelt ◽  
Sara Bals
Keyword(s):  
Deep Learning ◽  
Electron Tomography ◽  
Energy Dispersive ◽  
Elemental Distribution ◽  
X Ray ◽  
Powerful Approach ◽  
Dose Efficiency

The combination of energy-dispersive X-ray spectroscopy (EDX) and electron tomography is a powerful approach to retrieve the 3D elemental distribution in nanomaterials, providing an unprecedented level of information for complex,...

Sign in / Sign up

Export Citation Format

Share Document