scholarly journals Acquisition and Evaluation of Theoretical Forming Limit Diagram of Al 6061-T6 in Electrohydraulic Forming Process

Metals ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 401 ◽  
Author(s):  
Min-A Woo ◽  
Woo-Jin Song ◽  
Beom-Soo Kang ◽  
Jeong Kim
Keyword(s):  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Forming Limit Diagram ◽  
Forming Limit ◽  
Forming Process ◽  
Electrohydraulic Forming ◽  
Al 6061 ◽  
Shpb Test ◽  
Strain Rate Hardening ◽  
Free Bulging

The current study examines the forming limit diagram (FLD) of Al 6061-T6 during the electrohydraulic forming process based on the Marciniak–Kuczynski theory (M-K theory). To describe the work-hardening properties of the material, Hollomon’s equation—that includes strain and strain rate hardening parameters—was used. A quasi-static tensile test was performed to obtain the strain-hardening factor and the split-Hopkinson pressure bar (SHPB) test was carried out to acquire the strain rate hardening parameter. To evaluate the reliability of the stress–strain curves obtained from the SHPB test, a numerical model was performed using the LS–DYNA program. Hosford’s yield function was also employed to predict the theoretical FLD. The obtained FLD showed that the material could have improved formability at a high strain rate index condition compared with the quasi-static condition, which means that the high-speed forming process can enhance the formability of sheet metals. Finally, the FLD was compared with the experimental results from electrohydraulic forming (EHF) free-bulging test, which showed that the theoretical FLD was in good agreement with the actual forming limit in the EHF process.

scholarly journals Development of Electrohydraulic Forming Process for Aluminum Sheet with Sharp Edge

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Ji-Yeon Shim ◽  
Bong-Yong Kang
Keyword(s):  
High Velocity ◽  
Forming Limit Diagram ◽  
Sharp Edge ◽  
Dome Height ◽  
Forming Limit ◽  
Radius Of Curvature ◽  
Forming Process ◽  
Electrohydraulic Forming ◽  
Forming Technology ◽  
Sharp Edges

Electrohydraulic forming (EHF), high-velocity forming technology, can improve the formability of a workpiece. Accordingly, this process can help engineers create products with sharper edges, allowing a product’s radius of curvature to be less than 2 mm radius of curvature. As a forming process with a high-strain rate, the EHF process produces a shockwave and pressure during the discharge of an electrical spark between electrodes, leading to high-velocity impact between the workpiece and die. Therefore, the objective of this research is to develop an EHF process for forming a lightweight materials case with sharp edges. In order to do so, we employed A5052-H32, which has been widely used in the electric appliance industry. After drawing an A5052-H32 Forming Limit Diagram (FLD) via a standard limiting dome height (LDH) test, improvements to the formability via the EHF process were evaluated by comparing the strain between the LDH test and the EHF process. From results of the combined formability, it is confirmed that the formability was improved nearly twofold, and a sharp edge with less than 2 mm radius of curvature was created using the EHF process.

Reliability Analysis of the Tube Hydroforming Process Based on Forming Limit Diagram

2005 ◽  
Vol 128 (3) ◽  
pp. 402-407 ◽  
Author(s):  
Bing Li ◽  
Don R. Metzger ◽  
Tim J. Nye
Keyword(s):  
Automotive Industry ◽  
Metal Forming ◽  
Tube Hydroforming ◽  
Forming Limit Diagram ◽  
Probability Of Failure ◽  
Alternative Methods ◽  
Forming Limit ◽  
Forming Process ◽  
Hydroforming Process ◽  
Free Bulging

Tube hydroforming is an attractive manufacturing process in the automotive industry because it has several advantages over alternative methods. In order to determine the reliability of the process, a new method to assess the probability of failure is proposed in this paper. The method is based on the reliability theory and the forming limit diagram, which has been extensively used in metal forming as the criteria of formability. From the forming limit band in the forming limit diagram, the reliability of the forming process can be evaluated. A tube hydroforming process of free bulging is then introduced as an example to illustrate the approach. The results show this technique to be an innovative approach to avoid failure during tube hydroforming.

Effect of Alloy Composition and Pre-Ageing on the Stretch Formability of 6xxx Automotive Sheet Alloys

2018 ◽  
Vol 941 ◽  
pp. 955-960
Author(s):  
Hao Zhong ◽  
Ling Fei Cao
Keyword(s):  
Strain Rate ◽  
Work Hardening ◽  
Tensile Testing ◽  
Alloy Composition ◽  
Forming Limit Diagram ◽  
Forming Limit ◽  
Cu Content ◽  
Automotive Sheet ◽  
Stretch Formability ◽  
Strain Rate Hardening

In this study, the effect of Mg/Si ratio, Cu content and/or pre-ageing treatment (e.g. 100 °C for 2 h and/or 200 °C for 20 s) on the stretch formability of 6xxx alloys was investigated through their influence on the work hardening and strain-rate hardening behaviour using tensile testing and forming limit diagram tests. The results showed that a high Mg/Si ratio, a low Cu content and/or the employment of pre-ageing could deteriorate the stretch formability due to the decrease in work hardening and/or strain rate hardening capabilities. Moreover, the stretch formability was observed to have an opposite correlation with the paint-bake response of the alloys studied.

Reliability Analysis of the Tube Hydroforming Process Based on Forming Limit Diagram

2003 ◽  
Author(s):  
Bing Li ◽  
Don R. Metzger ◽  
T. J. Nye
Keyword(s):  
Tube Hydroforming ◽  
Forming Limit Diagram ◽  
Alternative Methods ◽  
Forming Limit ◽  
Process Conditions ◽  
Forming Process ◽  
Element Simulation ◽  
Hydroforming Process ◽  
Free Bulging ◽  
The Relationship

Tube hydroforming has become an increasingly attractive manufacturing process in automotive industry due to it having several advantages over alternative methods. The forming limit diagram has been extensively used in metal forming as the criteria of formability. A method to assess the probability of failure of the process based on reliability theory and the forming limit diagram is proposed in this paper. The tube hydroforming process is affected by many parameters such as geometry, material properties, and process conditions. Finite element simulation was used to predict the relationship between the strain and these parameters, and a numerical method was applied to get the statistical distribution of the strain. Based on the forming limit band in the forming limit diagram, the reliability of the forming process can be evaluated. A tube hydroforming process of free bulging is then introduced as an example to illustrate the approach. The results show this reliability evaluation technique to be an innovative approach for product designers and process engineers to avoid failure during tube hydroforming.

Optimization of Sheet Metal Process Parameters of a Shield Case Piece Using Computer Simulation

2006 ◽  
Vol 510-511 ◽  
pp. 330-333
Author(s):  
M.C. Curiel ◽  
Ho Sung Aum ◽  
Joaquín Lira-Olivares
Keyword(s):  
Sheet Metal ◽  
Thickness Distribution ◽  
Forming Limit Diagram ◽  
Forming Limit ◽  
Physical Processes ◽  
Forming Process ◽  
Element Analysis ◽  
One Step ◽  
Range Of Values ◽  
Principal Strains

Numerical simulations based on Finite Element Analysis (FEA) are widely used to predict and evaluate the forming parameters before performing the physical processes. In the sheet metal industry, there are basically two types of FE programs: the inverse (one-step) programs and the incremental programs. In the present paper, the forming process of the shield case piece (LTA260W1-L05) was optimized by performing simulations with both types of software. The main analyzed parameter was the blankholding force while the rest of the parameters were kept constant. The criteria used to determine the optimum value was based on the Forming Limit Diagram (FLD), fracture and wrinkling of the material, thickness distribution, and the principal strains obtained. It was found that the holding force during the forming process deeply affects the results, and a range of values was established in which the process is assumed to give a good quality piece.

A Dynamic Mechanical Analysis of T2 Copper at High Strain Rates

2019 ◽  
Vol 812 ◽  
pp. 38-44
Author(s):  
Shuai Chen ◽  
Wen Bin Li ◽  
Xiao Ming Wang ◽  
Wen Jin Yao
Keyword(s):  
Yield Strength ◽  
Strain Rate ◽  
High Strain ◽  
Split Hopkinson Pressure Bar ◽  
Pure Copper ◽  
Dislocation Slip ◽  
Strain Rates ◽  
High Strain Rates ◽  
Stress Strain ◽  
Shpb Test

This work compares the pure copper (T2 copper)’s stress-strain relationship at different strain rates in the uni-axial tension test and Split Hopkinson Pressure Bar (SHPB) test. Small samples were utilized in the high strain rate SHPB test in which the accuracy was modified by numerical simulation. The experimental results showed that the T2 copper’s yield strength at high strain rates largely outweighed the quasi static yield strength. The flow stress in the stress-strain curves at different strain rates appeared to be divergent and increased with the increase in strain rates, showing great strain strengthening and strain rate hardening effects. Metallographic observation showed that the microstructure of T2 copper changed from equiaxed grains to twins and the interaction between the dislocation slip zone grain boundary and twins promoted the super plasticity distortion in T2 copper.

Study on the Forming Process of the Crossmember in Car Intermediate Floor

2013 ◽  
Vol 442 ◽  
pp. 593-598
Author(s):  
Xue Xia Wang ◽  
Peng Chong Guan ◽  
Hai Peng Li ◽  
Li Hui Wang ◽  
Na Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Process Parameters ◽  
Thickness Distribution ◽  
Forming Limit Diagram ◽  
Forming Limit ◽  
Simulation Technology ◽  
Forming Process ◽  
Distribution Diagram ◽  
Simulation Results

Flanging and bending forming processes of the crossmember in car intermediate floor are investigated respectively by using numerical simulation technology. The numerical model of the crossmember was established and its press forming effect was simulated to determine the feasible process parameters affecting its manufacturability. Forming limit diagram and thickness distribution diagram are used to evaluate simulation results of different process schemes. And then optimum values of process parameters for flanging and bending are found, which can reduce the tendencies of wrinkling, springback and crackling during the stamping of the product.

Sign in / Sign up

Export Citation Format

Share Document