scholarly journals The Effect of Different Annealing Temperatures on Recrystallization Microstructure and Texture of Clock-Rolled Tantalum Plates with Strong Texture Gradient

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 358
Author(s):  
Jialin Zhu ◽  
Shifeng Liu ◽  
Shuai Yang ◽  
Yu Zhang ◽  
Jing Zhang ◽  
...  
Keyword(s):  
Electron Backscatter Diffraction ◽  
Growth Time ◽  
Texture Gradient ◽  
Stored Energy ◽  
X Ray Diffraction ◽  
Center Layer ◽  
Annealing Temperatures ◽  
Nucleation Sites ◽  
Complete Recrystallization ◽  
Backscatter Diffraction

The texture and the bulk stored energy along the thickness direction were extremely inhomogeneous in the clock-rolled tantalum sheets with 70% reduction. Therefore, the effects of different annealing temperatures on the microstructure and texture distribution of tantalum plates through the thickness were investigated by X-ray diffraction (XRD) and electron backscatter diffraction (EBSD). The results showed that the occurrence of strong {111} recrystallization texture in the center layer can be attributed to the subgrains nucleation mechanism when annealed at the low temperature. Many subgrains with {111} orientation appeared in the center layer, due to its high stored energy and preferential nucleation sites of the {111} deformed matrix, and rapidly grew into the effective nucleus, resulting in the large {111} grain size and strong {111} texture after complete recrystallization. Contrarily, at the high temperature, high-angle grain boundaries had sufficient driving force to generate migration, due to the lack of recovery, and the growth time of recrystallized nucleus was much shorter, contributing to relatively uniform recrystallization microstructure and texture distribution along the thickness.

scholarly journals Effects of Annealing Temperature on Recrystallization Texture and Microstructure Uniformity of High Purity Tantalum

Metals ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 75 ◽  
Author(s):  
Jialin Zhu ◽  
Chao Deng ◽  
Yahui Liu ◽  
Nan Lin ◽  
Shifeng Liu
Keyword(s):  
Low Temperature ◽  
Electron Backscatter Diffraction ◽  
Stored Energy ◽  
X Ray Diffraction ◽  
Center Layer ◽  
X Ray ◽  
Texture Intensity ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Backscatter Diffraction

One hundred and thirty-five degree clock rolling significantly improves the texture homogeneity of tantalum sheets along the thickness, but a distinctly fragmented substructure is formed within {111} (<111>//normal direction (ND)) and {100} (<100>//ND) deformation grains, which is not suitable to obtain a uniform recrystallization microstructure. Thus, effects of different annealing temperatures on the microstructure and texture heterogeneity of tantalum sheets along the thickness were investigated by X-ray diffraction (XRD), electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). Results show that the texture distribution along θ-fiber and γ-fiber is irregular and many large grains with {111} orientation develop during annealing at high temperature. However, low-temperature annealing can not only weaken the texture intensity in the surface and the center layer but also introduce a more uniform grain size distribution. This result can be attributed to the subgrain-nucleation-dominated recrystallization mechanism induced by recovery at low temperature, and moreover, a considerable decline of recrystallization driving force resulting from the release of stored energy in the deformation matrix.

scholarly journals Stable and Metastable Phase Equilibria Involving the Cu6Sn5 Intermetallic

2021 ◽  
Author(s):  
A. Leineweber ◽  
M. Löffler ◽  
S. Martin
Keyword(s):  
Phase Equilibria ◽  
Electron Backscatter Diffraction ◽  
Metastable Phase ◽  
Stable Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Ordered Phases ◽  
Backscatter Diffraction ◽  
Kinetics Of

Abstract Cu6Sn5 intermetallic occurs in the form of differently ordered phases η, η′ and η′′. In solder joints, this intermetallic can undergo changes in composition and the state of order without or while interacting with excess Cu and excess Sn in the system, potentially giving rise to detrimental changes in the mechanical properties of the solder. In order to study such processes in fundamental detail and to get more detailed information about the metastable and stable phase equilibria, model alloys consisting of Cu3Sn + Cu6Sn5 as well as Cu6Sn5 + Sn-rich melt were heat treated. Powder x-ray diffraction and scanning electron microscopy supplemented by electron backscatter diffraction were used to investigate the structural and microstructural changes. It was shown that Sn-poor η can increase its Sn content by Cu3Sn precipitation at grain boundaries or by uptake of Sn from the Sn-rich melt. From the kinetics of the former process at 513 K and the grain size of the η phase, we obtained an interdiffusion coefficient in η of (3 ± 1) × 10−16 m2 s−1. Comparison of this value with literature data implies that this value reflects pure volume (inter)diffusion, while Cu6Sn5 growth at low temperature is typically strongly influenced by grain-boundary diffusion. These investigations also confirm that η′′ forming below a composition-dependent transus temperature gradually enriches in Sn content, confirming that Sn-poor η′′ is metastable against decomposition into Cu3Sn and more Sn-rich η or (at lower temperatures) η′. Graphic Abstract

Physical Based Microstructure Modelling Coupled with Nucleation Theory during and after Hot Forming of AA5083

2010 ◽  
Vol 89-91 ◽  
pp. 509-514
Author(s):  
Pavel Sherstnev ◽  
Christof Sommitsch ◽  
Stefan Mitsche ◽  
Carsten Melzer
Keyword(s):  
Aluminium Alloy ◽  
Hot Rolling ◽  
Volume Fraction ◽  
Electron Backscatter Diffraction ◽  
Grain Structure ◽  
Nucleation Theory ◽  
Structure Evolution ◽  
Nucleation Sites ◽  
Nucleation Mechanisms ◽  
Backscatter Diffraction

A physical model based on three types of dislocations and three nucleation sites for recrystallized grain is applied to hot rolling simulation. This model was implemented into a commercial Finite Element (FE) analysis package FORGE 2008 to calculate both the structure evolution during and the recrystallized volume fraction after hot working of aluminium alloy 5083. It is shown that the main nucleation mechanisms in the aluminium alloy are the particle stimulated nucleation (PSN) and nucleation at grain boundaries. Hence the precipitation kinetics during homogenisation was investigated by use of the thermodynamic calculation software MatCalc. To validate the simulation results hot rolling experiments were performed by means of a laboratory mill. The grain structure evolution was analysed by electron backscatter diffraction (EBSD).

Mitrofanovite, Pt3Te4, a new mineral from the East Chuarvy deposit, Fedorovo–Pana intrusion, Kola Peninsula, Russia

2018 ◽  
Vol 83 (4) ◽  
pp. 523-530 ◽  
Author(s):  
Victor V. Subbotin ◽  
Anna Vymazalová ◽  
František Laufek ◽  
Yevgeny E. Savchenko ◽  
Chris J. Stanley ◽  
...  
Keyword(s):  
Kola Peninsula ◽  
Electron Backscatter Diffraction ◽  
New Mineral ◽  
Synthetic Analogue ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structural Identity ◽  
Polarised Light ◽  
Fe Alloys ◽  
Backscatter Diffraction

AbstractMitrofanovite, Pt3Te4, is a new telluride discovered in low-sulfide disseminated ore in the East Chuarvy deposit, Fedorovo–Pana intrusion, Kola Peninsula, Russia. It forms anhedral grains (up to ~20 μm × 50 μm) commonly in intergrowths with moncheite in aggregates with lukkulaisvaaraite, kotulskite, vysotskite, braggite, keithconnite, rustenburgite and Pt–Fe alloys hosted by a chalcopyrite–pentlandite–pyrrhotite matrix. Associated silicates are: orthopyroxene, augite, olivine, amphiboles and plagioclase. Mitrofanovite is brittle; it has a metallic lustre and a grey streak. Mitrofanovite has a good cleavage, along {001}. In plane-polarised light, mitrofanovite is bright white with medium to strong bireflectance, slight pleochroism, and strong anisotropy on non-basal sections with greyish brown rotation tints; it exhibits no internal reflections. Reflectance values for the synthetic analogue of mitrofanovite in air (Ro, Re’ in %) are: 58.4, 54.6 at 470 nm; 62.7, 58.0 at 546 nm; 63.4, 59.1 at 589 nm; and 63.6, 59.5 at 650 nm. Fifteen electron-microprobe analyses of mitrofanovite gave an average composition: Pt 52.08, Pd 0.19, Te 47.08 and Bi 0.91, total 100.27 wt.%, corresponding to the formula (Pt2.91Pd0.02)Σ2.93(Te4.02Bi0.05)Σ4.07 based on 7 atoms; the average of eleven analyses on synthetic analogue is: Pt 52.57 and Te 47.45, total 100.02 wt.%, corresponding to Pt2.94Te4.06. The density, calculated on the basis of the formula, is 11.18 g/cm3. The mineral is trigonal, space group R$\overline 3 $m, with a = 3.9874(1), c = 35.361(1) Å, V = 486.91(2) Å3 and Z = 3. The crystal structure was solved and refined from the powder X-ray-diffraction data of synthetic Pt3Te4. Mitrofanovite is structurally and chemically related to moncheite (PtTe2). The strongest lines in the powder X-ray diffraction pattern of synthetic mitrofanovite [d in Å (I) (hkl)] are: 11.790(23)(003), 5.891(100)(006), 2.851(26)(107), 2.137(16)(1013), 2.039(18)(0114), 1.574(24)(0120), 1.3098(21)(0027). The structural identity of natural mitrofanovite with synthetic Pt3Te4 was confirmed by electron backscatter diffraction measurements on the natural sample. The mineral name is chosen to honour Felix P. Mitrofanov, a Russian geologist who was among the first to discover platinum-group element mineralisation in the Fedorova–Pana complex.

Unusual Microstructural Development upon Gaseous Nitriding of Fe-4.65at% Al Alloy

2010 ◽  
Vol 89-91 ◽  
pp. 371-376
Author(s):  
S. Meka ◽  
R.E. Schacherl ◽  
E. Bischoff ◽  
Eric J. Mittemeijer
Keyword(s):  
Electron Backscatter Diffraction ◽  
Ferrite Matrix ◽  
Microstructural Development ◽  
Al Alloy ◽  
X Ray Diffraction ◽  
Gaseous Nitriding ◽  
Backscatter Diffraction ◽  
Micro Analysis ◽  
Very High ◽  
Plate Type

Employing NH3/H2 gas mixtures, Fe-4.65at% Al alloy specimens were nitrided to assess how the presence of Al, originally dissolved in the ferrite matrix, influences the development of γ-Fe4N1-x phase in the surface adjacent region. The nitrided specimens were characterized by light microscopy, X-ray diffraction, Electron Backscatter Diffraction and Electron Probe Micro Analysis. Surprisingly, formation of ε-Fe2N1-x was observed, although, for the applied nitriding parameters (nitriding potential and temperature), only the formation of γ-Fe4N1-x would be expected in case of nitriding pure ferrite. An unusual plate-type morphology of γ-Fe4N1-x was observed, contrasting with the usual continuous layer-type growth observed upon nitriding iron, Fe-Cr and Fe-V alloys. These unexpected phenomena may be explained as consequences of the need to realize a very high nitrogen supersaturation in the ferrite matrix in order to initiate the precipitation of AlN.

Growth of 4H-SiC Single Crystals on 6H-SiC Seeds with an Open Backside by PVT Method

2009 ◽  
Vol 615-617 ◽  
pp. 15-18 ◽  
Author(s):  
Emil Tymicki ◽  
Krzysztof Grasza ◽  
Katarzyna Racka ◽  
Marcin Raczkiewicz ◽  
Tadeusz Łukasiewicz ◽  
...  
Keyword(s):  
Single Crystals ◽  
Electron Backscatter Diffraction ◽  
Structural Defects ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Optical Scanning ◽  
Atomic Force ◽  
The Stability ◽  
Backscatter Diffraction ◽  
Source Materials

4H-SiC single crystals grown by the seeded physical vapour transport method have been investigated. These crystals were grown on 6H-SiC seeds. The influence of the seed temperature, form and granulation of SiC source materials on the stability and efficiency of the 4H polytype growth have been investigated. A new way of the seed mounting - with an open backside - has been used. Crystals obtained were free of structural defects in the form of hexagonal voids. The crystalline structure of SiC crystals was investigated by EBSD (Electron Backscatter Diffraction) and X-Ray diffraction methods. Moreover, defects in crystals and wafers cut from these crystals were examined by optical, scanning electron and atomic force microscopy combined with KOH etching.

The Effect of Deformation Strain on Texture Uniformity in Tantalum Sheet during Asymmetric Cross Rolling

2021 ◽  
Vol 1016 ◽  
pp. 1765-1769
Author(s):  
Jia Lin Zhu ◽  
Shi Feng Liu ◽  
Dou Dou Long ◽  
Ya Hui Liu ◽  
Shi Yuan Zhou ◽  
...  
Keyword(s):  
High Purity ◽  
Crystallographic Texture ◽  
Texture Gradient ◽  
X Ray Diffraction ◽  
Center Layer ◽  
Deformation Strain ◽  
Cross Rolling ◽  
X Ray

Microstructure and crystallographic texture play an important role in the sputtering target properties. The effect of asymmetric cross rolling (ACR) and deformation strain during ACR on texture homogeneity is not clear. Thus, high-purity tantalum (Ta) plates were ACR to 60% and 87% reduction in thickness. Texture of the rolled Ta sheets in the surface and center layer are characterized via X-ray diffraction (XRD). The XRD results indicate that ACR is effective to weaken the texture gradient existing in the as-received Ta plate. Besides, more homogeneous texture distribution along the thickness can be obtained with the increasing strain during ACR process.

Temperature-Dependent Mechanical Stability of Retained Austenite in Thermomechanically Processed 3Mn Steel

2021 ◽  
Vol 1016 ◽  
pp. 762-767
Author(s):  
Aleksandra Kozłowska ◽  
Adam Grajcar ◽  
Aleksandra Janik ◽  
Krzysztof Radwański
Keyword(s):  
Retained Austenite ◽  
Mechanical Stability ◽  
Electron Backscatter Diffraction ◽  
Tensile Tests ◽  
Trip Effect ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
Static Tensile ◽  
The Stability ◽  
Backscatter Diffraction

The temperature-dependent mechanical stability of retained austenite in medium-Mn transformation induced plasticity 0.17C-3.3Mn-1.6Al-1.7Al-0.22Si-0.23Mo thermomechanically processed steel was investigated using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and X-ray diffraction (XRD) methods. Specimens were deformed up to rupture in static tensile tests in a temperature range 20–200°C. It was found that deformation temperature affects significantly the intensity of TRIP effect. In case of specimens deformed at temperatures higher than 60°C, a gradual temperature-related decrease in the stability of γ phase was noted. It indicates a progressive decrease of the significance of the TRIP effect and at the same time the growing importance of the thermally activated processes affecting a thermal stability of retained austenite.

scholarly journals Effect of TiO2-Nanoparticles on Ni Electrodeposition on Copper Wire

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 406
Author(s):  
Samiha Saad ◽  
Zakaria Boumerzoug ◽  
Anne Laure Helbert ◽  
François Brisset ◽  
Thierry Baudin
Keyword(s):  
Surface Morphology ◽  
Tio2 Nanoparticles ◽  
Vickers Microhardness ◽  
Electron Backscatter Diffraction ◽  
Copper Wire ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electron Backscatter ◽  
Electrodeposited Nickel ◽  
Backscatter Diffraction

The objective of this work is to study, on a copper wire, the effect of TiO2-nanoparticles on electrodeposited nickel. Both the microstructure and surface morphology (texture) of the coating were investigated. This deposit is obtained from baths of sulfated electroplating Watts. The Ni-TO2 composite coating is deposited at a temperature of 45 °C. The composite deposit is prepared by adding nanoparticles of TiO2 to the electrolyte. The characterization has been carried out by X-ray diffraction, scanning electron microscopy, microhardness measurements, and electron backscatter diffraction (EBSD). Vickers microhardness was used to characterize the mechanical properties of the electrodeposited nickel. The results showed the effects of the TiO2 on the composition, the surface morphology, and the hardness of the deposited layer. However, there was not an effect of TiO2 nanoparticles on texture.

Sign in / Sign up

Export Citation Format

Share Document