scholarly journals Optimizing the Mechanical Properties in the Repair Zone of 5Cr5MoV by Controlling Welding Heat Input

Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 981 ◽  
Author(s):  
Yan Liang ◽  
Yaohui Liu ◽  
Yulai Song ◽  
Wei Cui
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Tensile Properties ◽  
Heat Input ◽  
Cold Working ◽  
Shielded Metal Arc Welding ◽  
Die Steel ◽  
Microhardness Distribution ◽  
Welding Heat Input ◽  
Metal Arc Welding

The influence of welding heat input on the microstructure and mechanical properties of 5Cr5MoV die steel was studied in order to improve the mechanical properties of the cold working die and extend its service life. Shielded metal arc welding (SMAW) method was used with different heat inputs in the range from 4.2 to 6.61 kJ/cm to repair the 5Cr5MoV die steel. Microhardness and tensile properties were performed to evaluate the repaired quality of the cold working die steel. The microhardness of the weld repaired zone gradually decreased from the weld to the tempering zone. The highest microhardness in the weld repaired zone was 863 HV, and finally, it decreased to about 300 HV. With the increase of heat input, the tensile strength of the weld and the heat affected zone increased; nevertheless, the tensile strength of the tempering zone increased first and then decreased. As a result, 6.6 kJ/cm is the best value of heat input judged from the microhardness distribution and the tensile properties.

scholarly journals Influence of Heat Inputs on Weld Profiles and Mechanical Properties of Carbon and Stainless Steel

2021 ◽  
Vol 18 (2) ◽  
pp. 135-143
Author(s):  
L.O. Osoba ◽  
W.A. Ayoola ◽  
Q.A. Adegbuji ◽  
O.A. Ajibade
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Stainless Steel ◽  
Carbon Steel ◽  
Ultimate Tensile Strength ◽  
Heat Input ◽  
Steel Plates ◽  
Shielded Metal Arc Welding ◽  
Full Penetration ◽  
Metal Arc Welding

This study examines the effect of heat input on the weld bead profile, microstructure and mechanical properties of single V- joint welded carbon and stainless-steel plates. The as-received sample steel plates were sectioned into eight pieces; dimension 75 X 30 X 10 mm  thicknesses. Shielded metal arc welding (SMAW) of heat inputs 1250 and 2030 J/mm was used to produce full penetration bead on the plates. Although visual inspection indicated that some of the welds were macro defect free, austenitic stainless steel exhibited more weld distortions than the carbon steel and this was partially attributed to its lower carbon content and the width to depth aspect ratio of the weld profile aside the magnitude of the induced stress. For the carbon steel, as the heat input increased, the hardness value of both the heat affected zone and fusion zone increased. In contrast, for stainless steel, the hardness values were reasonably comparable within same weld region (HAZ or FZ) irrespective of heat input. Furthermore, the ultimate tensile strength of the stainless steel decreased as heat input increased while the ductility increased with an increase in heat input, in contrast to carbon steel, where both ductility and ultimate tensile strength generally decreased.

Shielded metal arc welding of AISI 409M ferritic stainless steel: study on mechanical, intergranular corrosion properties and microstructure analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sachin Ambade ◽  
Chetan Tembhurkar ◽  
Awanikumar P. Patil ◽  
Prakash Pantawane ◽  
Ravi Pratap Singh
Keyword(s):  
Corrosion Behavior ◽  
Heat Input ◽  
Intergranular Corrosion ◽  
Arc Welding ◽  
High Heat ◽  
Shielded Metal Arc Welding ◽  
Corrosion Properties ◽  
Content Type ◽  
Welding Heat Input ◽  
Metal Arc Welding

Purpose The purpose of this study is on AISI 409 M ferritic stainless steel (FSS) which is developing a preferred choice for railway carriages, storage tanks and reactors in chemical plants. The intergranular corrosion behavior of welded SS 409 M has been studied in H2SO4 solution (0.5 M) with the addition of NH4SCN (0.01 M) with different heat input. As this study is very important in context of various chemical and petrochemical industries. Design/methodology/approach The microstructure, mechanical properties and intergranular corrosion properties of AISI 409 M FSS using shielded metal arc welding were investigated. Shielded metal arc welding with different welding current values are used to change the heat input in the joints resulted in the microstructural variations. The microstructure of the welded steel was carefully inspected along the width of the heat-affected zone (HAZ) and the transverse-section of the thin plate. Findings The width of heat affected zone (3.1,4.2 and 5.8 mm) increases on increasing the welding heat input. Due to change in grain size (grain coarsening) as HAZ increased. From the microstructure, it was observed that the large grain growth which is dendritic and the structure become finer to increase in welding heat input. For lower heat input, the maximum microhardness value (388HV) was observed compared with medium (351 HV) and higher heat input (344 HV), which is caused by a rapid cooling rate and the depleted area of chromium (Cr) and nickel (Ni). The increase in weld heat input decreases tensile strength, i.e. 465 MPa, 440 MPa and 418 MPa for low, medium and high heat input, respectively. This is because of grain coarsening and chromium carbide precipitation in sensitized zone and wider HAZ. The degree of sensitization increases (27.04%, 31.86% and 36.08%) to increase welding heat input because of chromium carbide deposition at the grain boundaries. The results revealed that the higher degree of sensitization and the difference in intergranular corrosion behavior under high heat input are related to the grain growth in the HAZ and the weld zone. Originality/value The study is based on intergranular corrosion behavior of welded SS 409 M in H2SO4 solution (0.5 M) with the addition of NH4SCN (0.01 M) with different heat input which is rarely found in literature.

scholarly journals Investigation on the effect of mechanical vibration in mild steel weld pool

2019 ◽  
Vol 6 ◽  
pp. 21 ◽  
Author(s):  
Pravin Kumar Singh
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Mild Steel ◽  
Mechanical Vibration ◽  
Weld Zone ◽  
Welding Process ◽  
Steel Plates ◽  
Shielded Metal Arc Welding ◽  
Metal Arc Welding

This study presents a new concept of a vibratory welding setup which can transfer the mechanical vibrations in the weld zone during Shielded Metal Arc welding (SMAW) process and can also produce the resonance frequency of 300 Hz. In the present investigation mild steel plates of 6 mm thickness has been butt welded using both conventional and vibratory welding conditions. Microstructure and the mechanical properties of the butt welded joints were evaluated, and the results were compared. Further, in order to optimize the process parameters of vibratory welding technique Taguchi and analysis of variance (ANOVA) technique have been adopted. The responses considered for analysis are hardness, ultimate tensile strength (UTS) and impact strength. The result of the study indicates that by applying the vibratory treatment during welding process the mechanical properties such as hardness, tensile strength and impact strength have been enhanced. Lastly, the obtained results are correlated from the results in the past researches.

INCO-WELD B ELECTRODE

Alloy Digest ◽  
1984 ◽  
Vol 33 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Arc Welding ◽  
Base Alloy ◽  
Heat Treating ◽  
Alternating Current ◽  
Nickel Base Alloy ◽  
Shielded Metal Arc Welding ◽  
Metal Arc Welding ◽  
Nickel Base

Abstract INCO-WELD B is a nickel-base alloy developed for shielded metal-arc welding of nickel steels for cryogenic applications. It is similar to INCO-WELD A Electrode (Alloy Digest Ni-305, November 1984) except that it is designed for use with alternating current to minimize magnetic arc blow. It can be operated in all welding positions. This datasheet provides information on composition and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-307. Producer or source: Huntington Alloys.

ALLEGHENY LUDLUM TYPE 205

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Austenitic Steels

Abstract Allegheny Stainless Type 205 is a chromium-manganese nitrogen austenitic high strength stainless steel that maintains its low magnetic permeability even after large amounts of cold working. Annealed Type 205 has higher mechanical properties than any of the conventional austenitic steels-and for any given strength level, the ductility of Type 205 is comparable to that of Type 301. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-640. Producer or source: Allegheny Ludlum Corporation. Originally published March 1996, revised October 1997.

INCO-WELD C

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Tensile Properties ◽  
Stainless Steels ◽  
Arc Welding ◽  
Carbon Steels ◽  
Alloy Electrode ◽  
Shielded Metal Arc Welding ◽  
Medium Carbon ◽  
Metal Arc Welding ◽  
Spring Steels ◽  
Medium Carbon Steels

Abstract INCO WELD C Electrode is a stainless-alloy electrode especially designed for shielded-metal-arc welding of a broad range of materials, including many difficult-to-weld compositions. It can be used in stainless steels, mild and medium-carbon steels,and spring steels. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on joining. Filing Code: SS-632. Producer or source: Inco Alloys International Inc.

scholarly journals Effect of Water Flow on Underwater Wet Welded A36 Steel

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 682
Author(s):  
Eko Surojo ◽  
Aziz Harya Gumilang ◽  
Triyono Triyono ◽  
Aditya Rio Prabowo ◽  
Eko Prasetya Budiana ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Flow ◽  
Flow Rate ◽  
Water Flow Rate ◽  
Physical And Mechanical Properties ◽  
Shielded Metal Arc Welding ◽  
Effect Of Water ◽  
Bending Effect ◽  
Metal Arc Welding ◽  
A36 Steel

Underwater wet welding (UWW) combined with the shielded metal arc welding (SMAW) method has proven to be an effective way of permanently joining metals that can be performed in water. This research was conducted to determine the effect of water flow rate on the physical and mechanical properties (tensile, hardness, toughness, and bending effect) of underwater welded bead on A36 steel plate. The control variables used were a welding speed of 4 mm/s, a current of 120 A, electrode E7018 with a diameter of 4 mm, and freshwater. The results show that variations in water flow affected defects, microstructure, and mechanical properties of underwater welds. These defects include spatter, porosity, and undercut, which occur in all underwater welding results. The presence of flow and an increased flow rate causes differences in the microstructure, increased porosity on the weld metal, and undercut on the UWW specimen. An increase in water flow rate causes the acicular ferrite microstructure to appear greater, and the heat-affected zone (HAZ) will form finer grains. The best mechanical properties are achieved by welding with the highest flow rate, with a tensile strength of 534.1 MPa, 3.6% elongation, a Vickers microhardness in the HAZ area of 424 HV, and an impact strength of 1.47 J/mm2.

scholarly journals Microstructural Characteristics and Mechanical Properties of Friction Stir Spot Welded 2A12-T4 Aluminum Alloy

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Huijie Liu ◽  
Yunqiang Zhao ◽  
Xingye Su ◽  
Lilong Yu ◽  
Juncai Hou
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Fracture Mode ◽  
Heat Input ◽  
Tensile Shear ◽  
Microstructural Characteristics ◽  
Friction Stir ◽  
Welding Heat Input ◽  
Mixed Fracture ◽  
Spot Welded

2A12-T4 aluminum alloy was friction stir spot welded, and the microstructural characteristics and mechanical properties of the joints were investigated. A softened microstructural region existed in the joint, and it consisted of stir zone (SZ), thermal mechanically affected zone (TMAZ), and heat affected zone (HAZ). The minimum hardness was located in TMAZ, and the average hardness value in SZ can be improved by appropriately increasing welding heat input. The area of complete bonding region at the interface increased with increasing welding heat input because more interface metals were mixed. In a certain range of FSSW parameters, the tensile shear failure load of the joint increased with increasing rotation speed, but it decreased with increasing plunge rate or decreasing shoulder plunging depth. Two kinds of failure modes, that is, shear fracture mode and tensile-shear mixed fracture mode, can be observed in the tensile shear tests, and the joint that failed in the tensile-shear mixed fracture mode possessed a high carrying capability.

scholarly journals Effect of Zr Addition on the Mechanical Properties and Superplasticity of a Forged SP700 Titanium Alloy

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 906
Author(s):  
Dong Han ◽  
Yongqing Zhao ◽  
Weidong Zeng
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Titanium Alloy ◽  
Tensile Properties ◽  
Superplastic Deformation ◽  
Volume Fraction ◽  
Tensile Elongation ◽  
Β Phase ◽  
Zr Addition ◽  
Fine Microstructure

The present study focuses on the effect of 1% Zr addition on the microstructure, tensile properties and superplasticity of a forged SP700 alloy. The results demonstrated that Zr has a significant effect on inhibiting the microstructural segregation and increasing the volume fraction of β-phase in the forged SP700 alloy. After annealing at 820 °C for 1 h and aging at 500 °C for 6 h, the SP700 alloy with 1% Zr showed a completely globular and fine microstructure. The yield strength, ultimate tensile strength and tensile elongation of the alloy with optimized microstructure were 1185 MPa, 1296 MPa and 10%, respectively. The superplastic deformation was performed at 750 °C with an elongation of 1248%. The improvement of tensile properties and superplasticity of the forged SP700 alloy by Zr addition was mainly attributed to the uniform and fine globular microstructures.

Sign in / Sign up

Export Citation Format

Share Document