scholarly journals Effect of Quenching Temperature on Microstructure and Rolling Contact Fatigue Behavior of 17Cr2Ni2MoVNb Steel

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 735 ◽  
Author(s):  
Yalong Zhang ◽  
Shengguan Qu ◽  
Fuqiang Lai ◽  
Haidi Qin ◽  
Liman Huang ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Failure Mode ◽  
Fatigue Behavior ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Microscopic Analysis ◽  
Optical Microscope ◽  
Rolling Contact ◽  
Quenching Temperature ◽  
X Ray

17Cr2Ni2MoVNb steel is a new type of gear steel in the automotive industry; the rolling contact fatigue behavior is not well documented. In this study, some microscopic analysis methods (optical microscope (OM), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), and energy dispersive X-ray analysis (EDS)) were used to characterize material microstructure and damage surface. In addition, rolling contact fatigue behavior was evaluated by Weibull curve. The results show that the size of austenite grain increased while the quenching temperature increased. Moreover, the samples with a quenching temperature of 1000 °C exhibited the maximum mean life of 7.33 × 105 cycles. In addition, the failure mode of quenched at 900 °C and 1100 °C were delamination, and pitting was the main failure mode of 1000 °C.

Service Loading Analysis of Wind Turbine Gearbox Rolling Bearings Based on X-Ray Diffraction Residual Stress Measurements

2013 ◽  
Vol 768-769 ◽  
pp. 723-732 ◽  
Author(s):  
Jürgen Gegner ◽  
Wolfgang Nierlich
Keyword(s):  
Residual Stress ◽  
Wind Turbine ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
X Ray Diffraction ◽  
Rolling Bearings ◽  
Wind Turbine Gearbox ◽  
X Ray ◽  
Stress Measurements

Rolling bearings in wind turbine gearboxes occasionally fail prematurely by so-called white etching cracks. The appearance of the damage indicates brittle spontaneous tensile stress induced surface cracking followed by corrosion fatigue driven crack growth. An X-ray diffraction based residual stress analysis reveals vibrations in service as the root cause. The occurrence of high local friction coefficients in the rolling contact is described by a tribological model. Depth profiles of the equivalent shear and normal stresses are compared with residual stress patterns and a relevant fracture strength, respectively. White etching crack failures are reproduced on a rolling contact fatigue test rig under increased mixed friction. Causative vibration loading is evident from residual stress measurements. Cold working compressive residual stresses are an effective countermeasure.

scholarly journals Influence of Crowning on Rolling Contact Fatigue Strength and Failure Mode of Steel Roller

2007 ◽  
Vol 73 (728) ◽  
pp. 1222-1229 ◽  
Author(s):  
Masahiro FUJII ◽  
Seesregdorj BAYASGALAN ◽  
Akira YOSHIDA ◽  
Kenji HAMADA ◽  
Kiyoji MINEGISHI ◽  
...  
Keyword(s):  
Fatigue Strength ◽  
Failure Mode ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Steel Roller ◽  
Contact Fatigue Strength

Evaluation of Railway Rails Suffered from Rolling Contact Fatigue Using X-Ray Generalized cosα Method

2018 ◽  
Vol 941 ◽  
pp. 2378-2383
Author(s):  
Toshihiko Sasaki
Keyword(s):  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Full Width ◽  
Half Maximum ◽  
Diffraction Ring ◽  
X Ray ◽  
Depth Direction

In this study, the diffraction rings were measured point by point all over the head of rail sample which was used in service, and shearing stresses with respect to the depth direction were determined using the generalized cosα method. The full width at half maximum was also estimated from the diffraction ring.

Effect of ultrasonic surface rolling on microstructure and rolling contact fatigue behavior of 17Cr2Ni2MoVNb steel

2019 ◽  
Vol 366 ◽  
pp. 321-330 ◽  
Author(s):  
Ya-Long Zhang ◽  
Fu-Qiang Lai ◽  
Sheng-Guan Qu ◽  
Hai-Peng Liu ◽  
Dong-Sheng Jia ◽  
...  
Keyword(s):  
Fatigue Behavior ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact

Rolling contact fatigue behavior of Ti/TiN coated ADI by cathodic arc deposition

2017 ◽  
Vol 43 (5) ◽  
pp. 4263-4271 ◽  
Author(s):  
Diego Alejandro Colombo ◽  
Juan Miguel Massone ◽  
María Dolores Echeverría ◽  
Adriana Beatriz Márquez
Keyword(s):  
Fatigue Behavior ◽  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
Cathodic Arc Deposition ◽  
Cathodic Arc ◽  
Arc Deposition

Evaluation of Rolling Contact Fatigue Using X-Ray Diffraction Ring

2016 ◽  
pp. MPC20150027 ◽  
Author(s):  
Takumi Fujita ◽  
Naoya Kamura ◽  
Yoichi Maruyama ◽  
Toshihiko Sasaki
Keyword(s):  
Rolling Contact Fatigue ◽  
Contact Fatigue ◽  
Rolling Contact ◽  
X Ray Diffraction ◽  
Diffraction Ring ◽  
X Ray
Sign in / Sign up

Export Citation Format

Share Document