scholarly journals Superhydrophobic Film on Hot-Dip Galvanized Steel with Corrosion Resistance and Self-Cleaning Properties

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 687 ◽  
Author(s):  
Chongchong Li ◽  
Ruina Ma ◽  
An Du ◽  
Yongzhe Fan ◽  
Xue Zhao ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Photoelectron Spectroscopy ◽  
Copper Nitrate ◽  
Galvanized Steel ◽  
Electrochemical Technique ◽  
Etching Time ◽  
Galvanic Replacement ◽  
Water Contact ◽  
X Ray ◽  
Self Cleaning

Super-hydrophobic film with hierarchical micro/nano structures was prepared by galvanic replacement reaction process on the surface of galvanized steel. The effects of the etching time and copper nitrate concentration on the wetting property of the as-prepared surfaces were studied. Scanning electron microscopy/energy dispersive spectroscopy (SEM/EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and electrochemical technique were employed to characterize the surface morphology, chemical composition, and corrosion resistance. The stability and self-cleaning property of the as-fabricated super-hydrophobic film were also evaluated. The super-hydrophobic film can be obtained within 3 min and possesses a water contact angle of 164.3° ± 2°. Potentiodynamic polarization measurements indicated that the super-hydrophobic film greatly improved the corrosion resistance of the galvanized steel in 3.5 wt % NaCl aqueous solution. The highest inhibition efficiency was estimated to be 96.6%. The obtained super-hydrophobic film showed good stability and self-cleaning property.

Silver mirror reaction metallized chromatography paper for supercapacitor application

2021 ◽  
Author(s):  
I-Hsuan Chen ◽  
Jung-Hsien Chang ◽  
Ren-Jie Xie ◽  
Chia-Hui Tseng ◽  
Sheng-Rong Hsieh ◽  
...  
Keyword(s):  
Flexible Electronics ◽  
Photoelectron Spectroscopy ◽  
Cost Effective ◽  
Water Contact ◽  
X Ray ◽  
Supercapacitor Application ◽  
Resource Limited ◽  
Vis Spectroscopy ◽  
Silver Mirror ◽  
Silver Mirror Reaction

Abstract In this study, the easy-to-operate silver mirror reaction (SMR) was used for metallizing chromatography paper. The SMR-metallized paper was characterized by water contact angle measurements, a surface profiler, X-ray photoelectron spectroscopy, UV-vis spectroscopy, X-ray diffraction, and electrical resistance measurement. The characterization results show that Ag was successfully synthesized on cellulose fibers and was electrically conductive after cyclic bending. Moreover, this SMR-metallized paper was used as electrodes for fabricating a supercapacitor. This SMR-metallized paper could be used for realizing cost-effective flexible electronics applied in on-site biochemical sensing in resource-limited settings.

scholarly journals Preparation and characterization of self-cleaning cotton fabric loaded with self-dispersive and reactive biphasic TiO2

2021 ◽  
Author(s):  
Kuang Wang ◽  
Jiayi Chen ◽  
Jialong Tian ◽  
Dawei Gao ◽  
Xiaolei Song ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Cotton Fabrics ◽  
Ammonia Solution ◽  
X Ray ◽  
Washing Fastness ◽  
Fastness Property ◽  
Structure Dispersion ◽  
Ft Ir ◽  
Self Cleaning

Abstract In this article, amino functionalized TiO2 (TiO2/KH550) was obtained in a mild reaction between 3-aminopropyltriethoxysilane and TiO2 with the aid of concentrated ammonia solution. 4-(4,6-dichloro-1,3,5-triazine-2-yl) amino) sodium benzenesulfonate (SAT) was synthesized and characterized by 1H NMR and fourier transform infrared spectroscopy (FT-IR). Self-dispersive and reactive TiO2 (TiO2/KH550/SAT) was prepared by nucleophile substitution reaction between TiO2/KH550 and SAT. Finally, cotton fabrics loaded with different amounts of TiO2/KH550/SAT were achieved by pad-dry-cure method. The chemical structure, dispersion and thermal performance of TiO2, TiO2/KH550 and TiO2/KH550/SAT were investigated by FT-IR, zeta potential and thermogravimetric analysis (TG). The crystalline phase, morphology, chemical composition and optical absorption property of cotton fabrics were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). Moreover, the anti-ultraviolet, self-cleaning and washing fastness properties of cotton fabrics were investigated. It has been found that TiO2/KH550/SAT demonstrated excellent dispersion stability in aqueous even after standing for a month. Cotton fabrics loaded with TiO2/KH550/SAT possessed adorable anti-ultraviolet performance, highly efficient and durable self-cleaning activity as well as appreciable washing fastness property. The mechanism and possible reactions for the preparation of self-cleaning cotton fabrics loaded with TiO2/KH550/SAT were proposed.

scholarly journals Influence of Cu(NO3)2 content used in thermal shock method on the photocatalytic activity of Cu-Modified ZnO nanoparticles

2021 ◽  
Vol 5 (3) ◽  
pp. first
Author(s):  
Thế Luân Nguyễn ◽  
Tiến Khoa Lê ◽  
Châu Ngọc Hoàng ◽  
Hữu Khánh Hưng Nguyễn ◽  
Thị Kiều Xuân Huỳnh
Keyword(s):  
Crystal Structure ◽  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Thermal Shock ◽  
Photoelectron Spectroscopy ◽  
Copper Content ◽  
Uv Light ◽  
Copper Nitrate ◽  
X Ray ◽  
Doped Zno

The Cu doped ZnO photocatalysts were prepared on ZnO substrate modified with copper nitrate by thermal shock method with different ratio % molar Cu : Zn = 0.3, 0.5, 1.0, 2.0 and 5.0 in order to study the impacts of copper content on the photocatalytic activity of ZnO under both UV and Vis light irradiation. The crystal structure, morphology bulk and surface were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Their photocatalytic activities were studied via time-dependent degradation of methylene blue in aqueous solution. The results exhibit that crystal structure and morphology of Cu doped ZnO photocatalysts is not modified significally than ZnO original but surface charateristicschanged greatly. The photocatalyst was doped with copper content under 2% showed formation of Cu species. These samples perform photocatalytic activity higher than ZnO. The CuNZO-0.05-500 had the highest rate constants for methylene blue degradation (kUV = 6,901 h-1, kVIS = 0,224 h-1), which are about 2.2 times and 1.3 times higher than unmodified ZnO under UV light and Vis light, respectively. However, the CuNZO-5.0-500 which had the formation of CuO phase and unchangeable ZnO's surface has photocatalytic activity similar to pure ZnO.

The Surface Modification and Characteristics of Useful Expanded PTFE Composites by Photo-Radiation Methods

2013 ◽  
Vol 690-693 ◽  
pp. 1636-1640 ◽  
Author(s):  
Te Hsing Wu ◽  
Ko Shao Chen ◽  
Lie Hang Shen
Keyword(s):  
Contact Angle ◽  
Acetic Acid ◽  
Photoelectron Spectroscopy ◽  
Plasma Deposition ◽  
Material Surface ◽  
Water Contact ◽  
X Ray ◽  
Hydrogel Film ◽  
Γ Ray ◽  
Ptfe Composites

In this study, We immobilized hydrogel material onto expanded polytetrafluoroethylene (ePTFE) film and used as an functional biomaterial. The material is a film containing titanium oxide onto polymer sheet. The hydrogel film is hydrophilic, bacterial inactivated and bio-compatible. In order to improve the ePTFE film biocompatibility, the cold plasma or γ-ray technology was used with acetic acid as monomer to deposit onto ePTFE film and then (N-isopropylacrylamide) was grafted onto the surface by radiation photo-grafting. The characteristics of the material surface were evaluated with X-ray photoelectron spectroscopy (XPS), FTIR and water contact angle. It was found that the contact angle of water on the untreated ePTFE significantly decrease from125° to 72° after ePTFE film being treated with acetic acid plasma deposition procedure. Due to the hydrophilicity of poly (N-isopropylacrylamide), so the contact angle of water on the ePTFE-g-NIPAAm almost approached to 0°. This thermal sensitive ePTFE hydrogels can be applied to artificial guiding tube and wound dressing material.

The influence of Ni on the microstructure and corrosion resistance of high-strength low alloy steel in the Cl-containing environment

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Dan Wang ◽  
Qingdong Zhong ◽  
Jian Yang ◽  
Shujian Zhang
Keyword(s):  
Corrosion Resistance ◽  
Alloy Steel ◽  
Photoelectron Spectroscopy ◽  
Hsla Steel ◽  
Electrochemical Techniques ◽  
High Strength ◽  
Low Alloy Steel ◽  
Transfer Resistance ◽  
Content Type ◽  
X Ray

Purpose This paper aims to search the optimum content of Ni on the microstructure, phase and electrochemical behavior of high-strength low alloy (HSLA) steel in the 3.5 wt.% NaCl solution. Design/methodology/approach The microstructure and corrosion resistance of Ni-containing HSLA steel in the simulated marine environment was studied by optical microscopy, scanning electron microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical techniques. Findings The sample containing 3.55 wt.% of nickel exhibited a finer grain size of 10 μm and a lower icorr of 2.169 µA cm−2. The XRD patterns showed that the Fe-Cr-Ni solid solution, FeC and Cr3C2 were observed in samples when Ni was added. Besides, the 3.55 wt.% of nickel addition enhanced the charge transfer resistance of the low alloy steel which suggested the sample possessed excellent inhibition of electrochemical reaction and corrosion resistance. The XPS spectrum suggested that nickel was beneficial to improve the corrosion resistance of steel by forming protective oxides, and the ratio of Fe2+/Fe3+ in protective oxides was increased. Practical implications Finding the comprehensive performance of HSLA steel which can be applied to unmanned surface vehicles in marine operations. Originality/value This study has a guiding significance for optimizing the composition of HSLA steel in a Cl- containing environment.

scholarly journals Lotus-Inspired Multiscale Superhydrophobic AA5083 Resisting Surface Contamination and Marine Corrosion Attack

Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1592 ◽  
Author(s):  
Binbin Zhang ◽  
Weichen Xu ◽  
Qingjun Zhu ◽  
Shuai Yuan ◽  
Yantao Li
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chemical Elements ◽  
Surface Contamination ◽  
Localized Corrosion ◽  
Metallic Surface ◽  
Water Repellent ◽  
Corrosion Attack ◽  
X Ray ◽  
Self Cleaning

The massive and long-term service of 5083 aluminum alloy (AA5083) is restricted by several shortcomings in marine and industrial environments, such as proneness to localized corrosion attack, surface contamination, etc. Herein, we report a facile and cost-effective strategy to transform intrinsic hydrophilicity into water-repellent superhydrophobicity, combining fluorine-free chemisorption of a hydrophobic agent with etching texture. Dual-scale hierarchical structure, surface height relief and surface chemical elements were studied by field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS), successively. Detailed investigations of the wetting property, self-cleaning effect, NaCl-particle self-propelling, corrosion and long-term behavior of the consequent superhydrophobic AA5083 surface were carried out, demonstrating extremely low adhesivity and outstanding water-repellent, self-cleaning and corrosion-resisting performance with long-term stability. We believe that the low cost, scalable and fluorine-free transforming of metallic surface wettability into waterproof superhydrophobicity is a possible strategy towards anti-contamination and marine anti-corrosion.

MICROSTRUCTURE AND ELECTROCHEMICAL PROPERTIES OF Ni–B/GO ULTRASONIC-ASSISTED COMPOSITE COATINGS

2019 ◽  
Vol 26 (10) ◽  
pp. 1950080
Author(s):  
JIBO JIANG ◽  
HAOTIAN CHEN ◽  
LIYING ZHU ◽  
YAOXIN SUN ◽  
WEI QIAN ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Composite Coatings ◽  
Ultrasonic Field ◽  
Protective Material ◽  
X Ray ◽  
Electrochemical Tests ◽  
Ultrasonic Assisted ◽  
Corrosive Environments

Graphene oxide (GO) sheet and ultrasonic field (UF) were successfully employed to produce Ni–B/GO and UF–Ni–B/GO composite coatings on Q235 mild steel by electroless plating. The composite coatings’ structure and surface morphology were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). Results showed that GO was successfully co-deposited in the Ni–B alloy. Moreover, UF–Ni–B/GO composite coatings have smoother surface and thicker cross-section than others. The microhardness and corrosion resistance of the sample coatings were determined using Vickers hardness tests, Tafel electrochemical tests and electrochemical impedance measurements (EIS) in 3.5[Formula: see text]wt.% NaCl solution to receive the effect of GO and ultrasonic. The findings indicated that UF–Ni–B/GO exhibited optimum hardness (856[Formula: see text]HV) and enhanced corrosion resistance (6.38 [Formula: see text][Formula: see text] over the Ni–B and Ni–B/GO coatings. Due to these interesting properties of the coating, it could be used as a protective material in the automotive and aerospace industries for parts of machines that were manipulated in high temperature and corrosive environments.

Effect of Plasma-Induced Polymerization on Contact Angle of Paper

2011 ◽  
Vol 396-398 ◽  
pp. 1619-1623
Author(s):  
Zhao Ping Song ◽  
Jun Rong Li ◽  
Hui Ning Xiao
Keyword(s):  
Contact Angle ◽  
Photoelectron Spectroscopy ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Polymer Grafting ◽  
Hydrophobic Property ◽  
Cellulose Fibres ◽  
Water Contact ◽  
X Ray ◽  
Factors Associated

Hydrophobic modification of cellulose fibres was conducted by plasma-induced polymer grafting in an attempt to increase the hydrophobicity of paper. Two hydrophobic monomers, i.e., butyl acrylate (BA) and 2-ethylhexyl acrylate (2-EHA) were grafted on cellulose fibres, induced by atmospheric cold plasma. Various influencing factors associated with the plasma-induced grafting were investigated, including the contact time and reaction temperature with monomers, and the dosage of monomers. Contact-angle measurement, infrared spectrum (IR), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM) were used to ascertain the occurrence of the grafting. The results showed that the hydrophobic property of the modified paper sheet was improved significantly after the plasma-induced grafting. The water contact angle on the surface of the paper reached up to higher than125°.

Electropolishing of 316L Stainless Steel Using Sulfuric Acid-Free Electrolyte

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Wei Han ◽  
Fengzhou Fang
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Sulfuric Acid ◽  
Phosphoric Acid ◽  
Photoelectron Spectroscopy ◽  
316L Stainless Steel ◽  
Electrochemical Analysis ◽  
Limiting Current ◽  
Plateau Region ◽  
X Ray

Abstract The study is to investigate the electropolishing characteristics of 316L stainless steel in a sulfuric acid-free electrolyte of phosphoric acid and glycerol and to explore the possibility of using this eco-friendly electrolyte instead of the widely used sulfuric acid-based electrolyte. The influences of process parameters on polishing effects and the corrosion resistance of electropolished samples are investigated. The experimental results show that the electropolishing temperature and acid concentration are directly related to the mass transport mechanism in the limiting current plateau region. The grain boundaries of workpiece were electrochemically dissolved faster than the grain themselves at the beginning of the electropolishing process because they are more reactive than grains. Moreover, the conventional sulfuric—phosphoric acid electrolyte was also used to electropolish the 316L stainless steel, and the electropolished surfaces were compared with the sulfuric acid-free electrolyte proposed in this study. When the sulfuric acid-free electrolyte was used to electropolish the 316L stainless steel, the X-ray photoelectron spectroscopy (XPS) analysis shows that atomic Cr/Fe ratio of 316L stainless steel was increased from 0.802 to 1.909 after electropolishing process in the sulfuric acid-free electrolyte of phosphoric acid and glycerol. The corrosion resistance of the electropolished 316L stainless steel is studied using electrochemical analysis, and the results are verified experimentally.

Toward Easily Enlarged Superhydrophobic Copper Surfaces with Enhanced Corrosion Resistance, Excellent Self-Cleaning and Anti-Icing Performance by a Facile Method

2020 ◽  
Vol 20 (10) ◽  
pp. 6317-6325 ◽  
Author(s):  
Xueting Shi ◽  
Libin Zhao ◽  
Jing Wang ◽  
Libang Feng
Keyword(s):  
Corrosion Resistance ◽  
Superhydrophobic Surface ◽  
Cost Effective ◽  
Copper Plate ◽  
Plate Surface ◽  
Water Contact ◽  
Copper Surfaces ◽  
Self Cleaning ◽  
Water Repellence

This work reports a facile method for fabricating superhydrophobic surface on copper plate by AgNO3 treatment and dodecyl mercaptan modification. The as-prepared superhydrophobic copper plate presents hierarchical and rough morphology composed of nanosheets and nanoparticleformed matrix. Meanwhile, long alkyl chains are assembled onto the rough surface successfully. Consequently, the copper plate is endowed with excellent superhydrophobic performance with a water contact angle of 156.8° and a rolling angle of ca. 3°. Moreover, the superhydrophobicity has long-term durability and excellent stability. Grounded on the strong water repellence, the resultant superhydrophobic copper plate surface exhibits multi-functions. The excellent performance can be well explained by “Cushion effect” and Capillary phenomena. As a result, water and corrosive species can be prevented from contacting with the copper plate surface, and contaminants can be taken away easily by the rolling water droplets. Meanwhile, the icing process of water is delayed on the superhydrophobic surface. Therefore, the superhydrophobic copper is endued with enhanced corrosion resistance, excellent self-cleaning and anti-icing performance. We believe that this facile method provides a simple and cost-effective process to improve the properties of copper plate, and which may see practical application of the superhydrophobic materials.

Sign in / Sign up

Export Citation Format

Share Document