scholarly journals Preparation of Vanadium Nitride Using a Thermally Processed Precursor with Coating Structure

Metals ◽  
2017 ◽  
Vol 7 (9) ◽  
pp. 360 ◽  
Author(s):  
Jingli Han ◽  
Yimin Zhang ◽  
Tao Liu ◽  
Jing Huang ◽  
Nannan Xue ◽  
...  
Keyword(s):  
Vanadium Nitride ◽  
Coating Structure ◽  
Thermally Processed

Structure and properties of gas-dynamic coatings and evaluation of their use in sliding friction pairs

2020 ◽  
pp. 260-266
Author(s):  
V.E. Arkhipov ◽  
T.I. Murav’eva ◽  
M.S. Pugachev ◽  
O.O. Shcherbakova
Keyword(s):  
Aluminum Oxide ◽  
Sliding Friction ◽  
Metal Layer ◽  
Structural Phase ◽  
Mechanical Mixture ◽  
Structural Factors ◽  
Coating Structure ◽  
Corundum Structure ◽  
Deposited Metal ◽  
Copper Zinc

The problems of changes in the coating structure depending on the composition of the sprayed mechanical mixture using copper particles and mixture of copper and zinc particles (" brass") and the effect of structural factors on the tribological properties of the deposited metal layer are considered. The results of X-ray structural, phase, chemical and durometric analyzes, as well as tribological testing of coatings are presented. It is found that structure with hardness of ≈102.7 HV is formed in the coating from mechanical mixture of particles of copper and aluminum oxide (corundum). Numerous pores are observed in the structure of the deposited metal layer, the main size of which does not exceed 2 μm. In the coating from mechanical mixture of particles copper, zinc and aluminum oxide (corundum), structure is formed based on copper with hardness of ≈106.5 HV, zinc — ≈49.7 HV, intermetallic compounds (γ- and ε-phases) — ≈168.7 HV, the mass fraction of which is 62.0, 7.9 and 24.2 %, respectively. Both coatings can be used in sliding friction pairs.

3D hierarchical porous N-doped carbon quantum dots/vanadium nitride hybrid microflowers as a superior electrode material toward high-performance asymmetric capacitive deionization

2021 ◽  
Author(s):  
Jingxuan Zhao ◽  
Zhibo Zhao ◽  
Yang Sun ◽  
Xiangdong Ma ◽  
Meidan Ye ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Electrode Material ◽  
High Performance ◽  
Carbon Nanomaterials ◽  
Electrode Materials ◽  
Carbon Quantum Dots ◽  
Vanadium Nitride ◽  
Capacitive Deionization ◽  
Hierarchical Porous

Taking into account of time-confusing preparation processing and unsatisfied desalination capacity of carbon nanomaterials, exploring efficient electrode materials remains a great challenge for practical capacitive deionization (CDI) application. In this...

scholarly journals Recatest—A Technique for Qualitative and Quantitative Assessment of Deferment and Degraded PVD Coatings and CVD Layers in the Deformed Area in the Scratch Test

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2625
Author(s):  
Piotr Domanowski ◽  
Marek Betiuk
Keyword(s):  
Scratch Test ◽  
Metallographic Analysis ◽  
Tool Steels ◽  
Test Device ◽  
Coating Structure ◽  
Testing Technique ◽  
Coating Materials ◽  
Qualitative And Quantitative ◽  
Quantitative Parameters

The purpose of the paper is to present a new Recatest testing technique which uses a series of abrasions within a scratch and its innovative application to describe selected quantitative parameters of locally, plastically deformed substrate and coating materials detected on the spherical microsection in the scratch test. The exposed material structures are subject to a metallographic analysis which allows for the determination of the quantitative parameters, which in turn allow for a description of the change in dynamics of the coating structure within the scratch area as a function of load. These parameters include scratch depth (hs), coating thickness (h1), flash height (hoc, hos), depth of intended material (hd), material depth under scratch (hcp), and material depth under coating (hdb). The paper also includes a description of the Recalo test device designed by the authors, which is used to make a series of spherical abrasion traces on the scratch surface. Recalo is dedicated to the Recatest technique. The analysed material was the CrN/CrCN/HS6-5-2, AlCrN -Alcrona-Balinit/D2 coatings deposited on tool steels.

Temperature-programmed nitridation of monodispersed VOx nanoparticles into nanocrystalline superconducting oxygen-doped vanadium nitride

2021 ◽  
Author(s):  
Khemchand Dewangan ◽  
Dadan Singh ◽  
Sandeep Kumar Singh Patel ◽  
Kamlesh Kumar Shrivas
Keyword(s):  
Thermal Decomposition ◽  
Synthesis Process ◽  
Vanadium Nitride ◽  
High Quality ◽  
Two Stage ◽  
Stage Synthesis ◽  
Temperature Programmed ◽  
Superconducting Applications

A two-stage synthesis process was employed to prepare high-quality nanocrystalline vanadium nitride (VN) for superconducting applications. Firstly, monodispersed amorphous VOx nanoparticles were obtained via thermal-decomposition of vanadium (III) acetylacetonate [V(acac)3]...

Granular Vanadium Nitride (VN) Cathode for High-Capacity and Stable Zinc-Ion Batteries

2021 ◽  
Author(s):  
Yao Rong ◽  
Hongzhe Chen ◽  
Jian Wu ◽  
Zhanhong Yang ◽  
Lie Deng ◽  
...  
Keyword(s):  
High Capacity ◽  
Zinc Ion ◽  
Vanadium Nitride

scholarly journals Material Application of a Transformer Box: A Study on the Electromagnetic Shielding Characteristics of Al–Ta Coating Film with Plasma-Spray Process

Coatings ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 495 ◽  
Author(s):  
Fei-Shuo Hung
Keyword(s):  
Stainless Steel ◽  
Structural Characteristics ◽  
Steel Substrate ◽  
Pure Aluminum ◽  
Multilayer Coating ◽  
Thickness Effect ◽  
Stress Effect ◽  
Coating Film ◽  
Coating Structure ◽  
Frequency Condition

In this study we present the results of two experiments. In the first one, a Ta–Al–SS (stainless steel (SS)) multilayer coating structure was prepared using plasma spraying equipment to investigate the coating structure and interface properties. In the second one, Ta–Al on multilayer glass was prepared using the sputtering process to measure the thickness effect of thin film on electromagnetic wave shielding (EMI) characteristics and on the design of high-power switchboard covers. According to the experimental results, the multilayer structure of Ta–Al on SS improves the mechanical properties of a stainless steel plate by enhancing the explosion-proof property. An appropriate thickness of the plasma-sprayed pure aluminum layer can increase the adhesion to the stainless steel substrate and buffer the stress effect. After heat treatment (annealing), the Ta–Al–SS multilayer structural characteristics are excellent and suitable for shielding effects at different temperatures and humidity, which can be used as a reference for the engineering application of communication rooms and base power stations. According to EMI test of multi-coated glass (Ta–Al–glass), by increasing the thickness of Ta layer, we cannot effectively improve full-frequency EMI shielding with improved shielding at low-mid frequency condition. In addition, the Ta–Al interface formation of an Al–Ta–O compound layer can improve the adiabatic effect to reduce the thermal conductivity.

Ultrahigh-Areal-Capacity Battery Anodes Enabled by Free-Standing Vanadium Nitride@N-Doped Carbon/Graphene Architecture

2020 ◽  
Vol 12 (44) ◽  
pp. 49607-49616
Author(s):  
Chuanchuan Li ◽  
Lin Zhu ◽  
Siyun Qi ◽  
Weini Ge ◽  
Wenzhe Ma ◽  
...  
Keyword(s):  
Vanadium Nitride ◽  
Free Standing ◽  
Areal Capacity
Sign in / Sign up

Export Citation Format

Share Document