scholarly journals The Interfacial Microstructure and Mechanical Properties of Diffusion-Bonded Joints of 316L Stainless Steel and the 4J29 Kovar Alloy Using Nickel as an Interlayer

Metals ◽  
2016 ◽  
Vol 6 (11) ◽  
pp. 263 ◽  
Author(s):  
Tingfeng Song ◽  
Xiaosong Jiang ◽  
Zhenyi Shao ◽  
Defeng Mo ◽  
Degui Zhu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
316L Stainless Steel ◽  
Interfacial Microstructure ◽  
Bonded Joints ◽  
Microstructure And Mechanical Properties ◽  
Kovar Alloy

scholarly journals Microstructure and mechanical properties relationship of additively manufactured 316L stainless steel by selective laser melting

2019 ◽  
Vol 5 ◽  
pp. 23 ◽  
Author(s):  
Anne-Helene Puichaud ◽  
Camille Flament ◽  
Aziz Chniouel ◽  
Fernando Lomello ◽  
Elodie Rouesne ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Selective Laser Melting ◽  
316L Stainless Steel ◽  
Hot Isostatic Pressing ◽  
Tensile Tests ◽  
Industrial Applications ◽  
Added Value ◽  
Laser Melting ◽  
Microstructure And Mechanical Properties

Additive manufacturing (AM) is rapidly expanding in many industrial applications because of the versatile possibilities of fast and complex fabrication of added value products. This manufacturing process would significantly reduce manufacturing time and development cost for nuclear components. However, the process leads to materials with complex microstructures, and their structural stability for nuclear application is still uncertain. This study focuses on 316L stainless steel fabricated by selective laser melting (SLM) in the context of nuclear application, and compares with a cold-rolled solution annealed 316L sample. The effect of heat treatment (HT) and hot isostatic pressing (HIP) on the microstructure and mechanical properties is discussed. It was found that after HT, the material microstructure remains mostly unchanged, while the HIP treatment removes the materials porosity, and partially re-crystallises the microstructure. Finally, the tensile tests showed excellent results, satisfying RCC-MR code requirements for all AM materials.

Microstructure and Mechanical Properties of Electron Beam Deposits of AISI 316L Stainless Steel

2011 ◽  
Author(s):  
Liang Wang ◽  
Sergio D. Felicelli ◽  
Jacob Coleman ◽  
Rene Johnson ◽  
Karen M. B. Taminger ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Electron Beam ◽  
Process Parameters ◽  
316L Stainless Steel ◽  
Beam Current ◽  
Aisi 316L ◽  
Translation Speed ◽  
Aisi 316L Stainless Steel ◽  
Microstructure And Mechanical Properties

Electron beam freeform fabrication (EBF3) is a process that uses an electron beam and wire feedstock to fabricate metallic parts inside a vacuum chamber. In this study, single and multiple layer linear deposits of AISI 316L stainless steel were produced with the EBF3 machine at NASA Langley Research Center (LaRC). EBF3 process parameters, including beam current, translation speed, and wire feed rate, were investigated in order to consider their effects on the resulting steel deposit geometry, microstructure and mechanical properties. Results indicate that the EBF3 process can produce pore-free, fully dense material within the range of process parameters used in this study. The electron beam deposited stainless steel has a solidification microstructure with fine columnar grains within most parts of the deposit due to the high cooling rate during the deposition, with some small homogeneous equiaxed grains at the top of the deposit. The mechanical properties of the deposits are comparable to those of wrought metal, which is attributed to the homogeneous fine-grained microstructure.

Sign in / Sign up

Export Citation Format

Share Document