scholarly journals Springback Analysis of Flexible Stretch Bending of Multi-Point Roller Dies Process for Y-Profile under Different Process Parameters

Metals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 646
Author(s):  
Chuandong Chen ◽  
Jicai Liang ◽  
Yi Li ◽  
Ce Liang ◽  
Wenming Jin
Keyword(s):  
Numerical Simulation ◽  
Process Parameters ◽  
Large Scale ◽  
Elastic Recovery ◽  
Scale Production ◽  
Forming Process ◽  
Influence Of Process Parameters ◽  
Zone Length ◽  
Plastic Forming ◽  
Bending Radius

Springback is a common defect caused by elastic recovery in the plastic forming process, which can cause the formed workpiece to deviate from the target shape. The purpose of this paper is to grasp the influence law of process parameters on springback deviation so as to optimize process parameters to reduce springback. Taking the Y-profile as the research object, the influence of process parameters such as horizontal bending radius, vertical bending radius, transition zone length, radius of roller dies, and wall thickness of the profile on springback deviation is discussed by numerical simulation. Additionally, the validity of the numerical simulation is verified through experiments. The springback law obtained by numerical simulation is applied to practical production, and the large-scale production of the Y-profile is realized.

Shaping Parameter Control of High-Speed Cold Roll-Beating Based on Simulation and Regression Analysis

2011 ◽  
Vol 109 ◽  
pp. 517-522
Author(s):  
Ming Shun Yang ◽  
Yan Li ◽  
Qi Long Yuan ◽  
Jian Ming Zheng
Keyword(s):  
Process Parameters ◽  
High Speed ◽  
Groove Depth ◽  
Forming Process ◽  
Influence Of Process Parameters ◽  
Lead Screw ◽  
Cold Roll ◽  
Plastic Forming ◽  
Near Net Shaping ◽  
Net Shaping

High-speed cold roll-beating is a near-net shaping technology in which with the characteristic of metal plastic forming used, revolving roller with high speed is applied to roll and beat the blank shaft, then force mental to flow and form a component profile. In the forming process, matching between the process parameters and the part profile is key to implement and apply the technology. In this paper, the FEM model of the lead screw cold roll-beating forming is built, the ABAQUS software is used to simulate the forming process. Based on the simulation results, the orthogonal test is designed, influence of process parameters on groove depth and bulging height of cold roll-beating process are studied; multivariate regression models of maximum bulging height and groove depth relative to the process parameters are established, and the effectiveness of the models are verified, which is of important guiding significances for forming accurate profile of lead screw by controlling process parameters.

Finite Element Simulation of Vacuum Hot Bulge Forming of Titanium Alloy Cylindrical Workpiece

2011 ◽  
Vol 675-677 ◽  
pp. 921-924 ◽  
Author(s):  
Ming Wei Wang ◽  
Chun Yan Wang ◽  
Li Wen Zhang
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Titanium Alloy ◽  
Finite Element Simulation ◽  
Process Parameters ◽  
Fe Model ◽  
Analysis Software ◽  
Forming Process ◽  
Element Simulation ◽  
Cylindrical Workpiece

Vacuum hot bulge forming (VHBF) is becoming an increasingly important manufacturing process for titanium alloy cylindrical workpiece in the aerospace industries. Finite element simulation is an essential tool for the specification of process parameters. In this paper, a two-dimensional nonlinear thermo-mechanical couple FE model was established. Numerical simulation of vacuum hot bulge forming of titanium alloy cylindrical workpiece was carried out using FE analysis software MSC.Marc. The effects of process parameter on vacuum hot bulge forming of BT20 titanium alloy cylindrical workpiece was analyzed by numerical simulation. The proposed an optimized vacuum hot bulge forming process parameters and die size. And the corresponding experiments were carried out. The simulated results agreed well with the experimental results.

Numerical Simulation and Parameter Optimization on Forming Process of Automobile Torque Box

2014 ◽  
Vol 722 ◽  
pp. 140-146
Author(s):  
Wen Juan Zhang ◽  
Long Wu ◽  
Gang Chen
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Parameter Optimization ◽  
Process Parameters ◽  
Fem Simulation ◽  
Simulation Software ◽  
Drawing Process ◽  
Forming Process ◽  
Element Simulation

In this paper the drawing process of Box-torque was simulated by Dynaform, which is FEM simulation software. The process parameters, which affected the quality of forming, were optimized by finite element simulation. The emphasis was focus on the optimization of draw-bead and BHF and data were summarized from the optimization graphs. In this simulation, lengthways draw-bead was set on the technical face for reducing or eliminating wrinkle. It was innovation difference from the usual that the draw-bead was set on binder. Finally the correctness of simulation was approved by comparing the optimization of simulation with the data of experimentation.

Study on the Forming Process of the Crossmember in Car Intermediate Floor

2013 ◽  
Vol 442 ◽  
pp. 593-598
Author(s):  
Xue Xia Wang ◽  
Peng Chong Guan ◽  
Hai Peng Li ◽  
Li Hui Wang ◽  
Na Zhang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Numerical Model ◽  
Process Parameters ◽  
Thickness Distribution ◽  
Forming Limit Diagram ◽  
Forming Limit ◽  
Simulation Technology ◽  
Forming Process ◽  
Distribution Diagram ◽  
Simulation Results

Flanging and bending forming processes of the crossmember in car intermediate floor are investigated respectively by using numerical simulation technology. The numerical model of the crossmember was established and its press forming effect was simulated to determine the feasible process parameters affecting its manufacturability. Forming limit diagram and thickness distribution diagram are used to evaluate simulation results of different process schemes. And then optimum values of process parameters for flanging and bending are found, which can reduce the tendencies of wrinkling, springback and crackling during the stamping of the product.

Forming Process Numerical Simulation of Beverage Can

2013 ◽  
Vol 753-755 ◽  
pp. 928-931 ◽  
Author(s):  
Guo Qiang Zhang ◽  
Ji Qiang Zhai ◽  
Ting Hao ◽  
Wen Juan Wang ◽  
Xu Biao Yang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Production Process ◽  
Process Parameters ◽  
Forming Process ◽  
Development Costs ◽  
Die Structure ◽  
Computer Aided ◽  
The Cost ◽  
Manufacturing Time ◽  
Process Method

Numerical simulation in the 200ml beverage can forming process was carried out by means of computer aided engineering. Beverage can drawing production process parameters and a forecast for the production process of all sorts of possible defects were obtained. Based on the results of the simulation, we can improve die structure and process method. Thus the development costs of die will be reduced. The manufacturing time of die will be shortened. The purpose of reducing the cost of production can be achieved ultimately.

Numerical Simulation of Non-Circular Hole Joint Precision Forming

2009 ◽  
Vol 16-19 ◽  
pp. 462-465
Author(s):  
Yong Fei Gu ◽  
Jun Ting Luo
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Circular Hole ◽  
Developed Countries ◽  
Forming Process ◽  
Backward Extrusion ◽  
Forming Technology ◽  
Plastic Forming ◽  
And Performance

The precision forming technology developed rapidly during passing two decades, however technologies of precision plastic forming the parts with deeper hole are far behind developed countries. The warm backward extrusion-ironing forming technology was presented for precision forming of non-circular hole joint in this paper. The forming process and parameter variable trend were simulated by finite element method, which the software MSC.Marc was applied. The forming die was designed and the forming experiment was finished. The products were deserved with good quality and performance. The feasibility of the forming technology is proved by experimental results and numerical simulation.

Influence of Process Parameters on the Ironing of Deep-Drawn Cups

1997 ◽  
Vol 119 (4B) ◽  
pp. 699-705 ◽  
Author(s):  
Der-Form Chang ◽  
Jyhwen E. Wang
Keyword(s):  
Analytical Model ◽  
Process Parameters ◽  
Frictional Force ◽  
Elastic Recovery ◽  
Experimental Measurements ◽  
Inhomogeneous Deformation ◽  
Slab Method ◽  
Influence Of Process Parameters ◽  
New Process ◽  
Punch Load

An analytical model for the ironing of deep-drawn cups is developed using the slab method. Inhomogeneous deformation of the drawn cup is taken into consideration. Elastic recovery after a cup being ironed is also modeled. Predictions on punch load and frictional force at the punch-cup interface show excellent agreements with experimental measurements. Influence of die semi-angle, ironing reduction ratio and friction on the process is investigated. With this model, new process parameters for ironing can be designed and analyzed before actual die tryout.

Springback Evaluation of Parts Made by Single-Point Incremental Sheet Forming

2011 ◽  
Author(s):  
Paolo Bosetti ◽  
Stefania Bruschi
Keyword(s):  
Process Parameters ◽  
Incremental Forming ◽  
Elastic Recovery ◽  
Single Point ◽  
Industrial Applications ◽  
Geometrical Parameters ◽  
Forming Process ◽  
Part Geometry ◽  
Before And After ◽  
Measuring Machine

One of the major drawbacks of single-point incremental forming process for sheet metal (SPIF) consists in the poor geometrical accuracy of formed parts. This limits the use of SPIF technology and has pushed the development of alternative incremental processes—such as the two-points incremental forming—aimed at improving the forming accuracy. However, these processes require the use of supporting dies and they therefore reduce the competitive advantage of SPIF process. The possibility to compensate for part springback, in order to have the part geometry as close as possible to the nominal one, represents one of the major challenges to make SPIF process suitable for real industrial applications. However, any possible approach in springback compensation must pass through the comprehension of the springback phenomenon. The objective of the paper is to analyze the springback of parts made by SPIF, by evaluating the influence that elastic recovery before and after the part unclamping has on the final part geometry. A SPIF experimental campaign was carried out on a truncated pyramid as case study, by varying both the part geometrical parameters (the wall angle and the height), and the process parameters (the tool step-down size and the feed rate). The material used in this study was the duplex steel DP600 provided in 0.8 mm thick sheets. After forming—but before unclamping—the part geometry was measured by means of of an electronic touch probe mounted on the machine tool-holder, in order to investigate the elastic recovery due to the successive tool laps. After unclamping, the part geometry was measured on a coordinate measuring machine. The influence of geometrical and process parameters was analyzed and the contribution of elastic recovery before and after the part unclamping was assessed.

Numerical Simulation of Precision Forming for Blade Rotor Based on DEFORM

2011 ◽  
Vol 130-134 ◽  
pp. 2388-2391
Author(s):  
Fang Liu ◽  
Lu Yun Zhang
Keyword(s):  
Numerical Simulation ◽  
Metal Flow ◽  
Flow Rule ◽  
Stress And Strain ◽  
Deformation Characteristics ◽  
Forming Process ◽  
Plastic Forming ◽  
Deform 3D

In order to study the deformation characteristics of the blade rotor in the precision forming, by means of the plastic forming software DEFORM-3D, the forming process is simulated. It is concluded that (1) the change of the stress and strain in different stages was simulated during the entire forming process. (2) Based on the stress and strain distributions, the analysis of the metal flow rule and the mechanism of the filling mold was proceeded to find that the properties of the blade rotor can be enhanced by means of the precision forming.

Sign in / Sign up

Export Citation Format

Share Document