scholarly journals Hot Compression Behavior of New Al-6Mg and Al-8Mg Alloy with Improved Hot Workability Fabricated by Direct Chill Casting Method

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 288
Author(s):  
Nam-Seok Kim ◽  
Kweon-Hoon Choi ◽  
Seung-Yoon Yang ◽  
Seong-Ho Ha ◽  
Young-Ok Yoon ◽  
...  
Keyword(s):  
Dynamic Recrystallization ◽  
Compression Test ◽  
Deformation Behavior ◽  
Hot Compression ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Strength Increase ◽  
Peak Strain ◽  
Hot Workability ◽  
Hot Compression Test

A hot compression test of new Al-6Mg and Al-8Mg alloys was conducted to understand the dynamic recrystallization (DRX) behavior by Mg contents. To investigate the hot workability of Al-Mg with high Mg contents, the hot deformation behavior of Al-6Mg and Al-8Mg alloys was analyzed by a hot compression test in the temperature range of 300–450 °C, and the strain rate range of 10−3–100/s. Subsequently, high-temperature deformation behavior was investigated through the processing map and microstructure observation. In this study, the results have shown that, as the Mg contents increase, the maximum and yield strength increase while rapid flow softening after the peak strain has been observed due to accelerated dynamic recrystallization (DRX). Finally, the increase of Mg contents affects an increase of heat dissipation efficiency to be an indicator of regular deformation.

High Temperature Deformation Behavior and Dynamic Recrystallization Law of 33Mn2V Steel for Oil Well Tube

2014 ◽  
Vol 511-512 ◽  
pp. 63-69
Author(s):  
Rui Jia ◽  
Fu Zhong Wang
Keyword(s):  
Dynamic Recrystallization ◽  
Deformation Behavior ◽  
Hot Compression ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Oil Well ◽  
Strain Rates ◽  
Compression Tests ◽  
Hot Deformation Behavior ◽  
Activation Energy Of Deformation

Deformation behavior of steel 33Μn2v for oil well tube was studied by hot compression tests conducted at various temperatures and strain rates.The Kumar model was developed to predict the hot deformation behavior of steel 33Mn2V for oil well tube.In this regard,the hot compression tests were carried out at the temperatures from 750°C to 1200°C and at the strain rates of 0.02s1 to 0.16 s1.The experimental data were then used to determine the constants of developed constitutive equations. The Kumar model can be represented by ZenerHollomon parameter in a hyperbolic sinusoidal equation form.The apparent activation energy of deformation is calculated to be 342.1481kJ/Mol.Dynamic recrystallization of steel 33Mn2V occur and the completion of the critical deformation is small,termination error and the initial deformation is smaller.Therefore,its easy for the steel 33Mn2V to the occurrence and completion of dynamic recrystallization.

scholarly journals Hot Deformation Behavior of Q345 Steel and Its Application in Rapid Shear Connection

Materials ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2186
Author(s):  
Mengwei Wu ◽  
Shuangjie Zhang ◽  
Shibo Ma ◽  
Huajun Yan ◽  
Wei Wang ◽  
...  
Keyword(s):  
High Temperature ◽  
Constitutive Equation ◽  
Dynamic Recrystallization ◽  
Deformation Behavior ◽  
High Temperature Deformation ◽  
Secondary Development ◽  
Temperature Deformation ◽  
Volume Percentage ◽  
Shear Connection ◽  
Deform 3D

The high-temperature deformation behavior of Q345 steel is detected by a Gleeble-3800 thermal simulator. The Arrhenius constitutive equation for high-temperature flow stress and the dynamic recrystallization model are constructed. With the secondary development technology, customized modifications are made on existing Deform-3D software. The constructed constitutive model and dynamic recrystallization model are embedded into Deform-3D to realize the secondary development of Deform-3D. The grain size and volume percentage distribution of dynamic recrystallization are obtained by simulating the shear connection process at high temperature and high speed. The results show that the constitutive equation and the dynamic recrystallization model constructed in this paper can be used to predict the evolution of the microstructure. The difference between the prediction results and the experimental data is about 3%. The accuracy of Arrhenius constitutive equation, dynamic recrystallization model and the feasibility of software secondary development are verified.

scholarly journals Deformation Behavior and Dynamic Recrystallization of Mg-1Li-1Al Alloy

Metals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1696
Author(s):  
Xiaoyan Feng ◽  
Xue Pang ◽  
Xu He ◽  
Ruihong Li ◽  
Zili Jin ◽  
...  
Keyword(s):  
Flow Stress ◽  
Dynamic Recrystallization ◽  
Strain Rate ◽  
Volume Fraction ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Avrami Equation ◽  
Uniaxial Compression Test ◽  
Hot Workability ◽  
The Relationship

In this paper, the hot workability of Mg-1Li-1Al (LA11) alloy is assessed through a uniaxial compression test in a temperature range from 200 to 400 °C and a strain rate, έ, of 1–0.01 s−1. The present study reveals that flow stress increases when the strain rate increases and deformation temperature decreases. Based on the hyperbolic sine equation, the flow stress constitutive equation of this alloy under high-temperature deformation is established. The average activation energy was 116.5 kJ/mol. Avrami equation was employed to investigate the dynamic recrystallization (DRX). The DRX mechanism affected by the deformation conditions and Zener–Hollomon parameters is revealed. Finally, the relationship between DRX volume fraction and deformation parameter is verified based on microstructure evolution, which is consistent with the theoretical prediction.

High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy

2015 ◽  
Vol 636 ◽  
pp. 188-195 ◽  
Author(s):  
N.D. Stepanov ◽  
D.G. Shaysultanov ◽  
N.Yu. Yurchenko ◽  
S.V. Zherebtsov ◽  
A.N. Ladygin ◽  
...  
Keyword(s):  
High Temperature ◽  
Dynamic Recrystallization ◽  
Deformation Behavior ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
High Entropy Alloy ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document