scholarly journals Li-Distribution in Compounds of the Li2O-MgO-Al2O3-SiO2-CaO System—A First Survey

Metals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1633
Author(s):  
Thomas Schirmer ◽  
Hao Qiu ◽  
Haojie Li ◽  
Daniel Goldmann ◽  
Michael Fischlschweiger
Keyword(s):  
Efficient Solutions ◽  
High Tech ◽  
Compound System ◽  
X Ray Diffraction ◽  
Critical Elements ◽  
System A ◽  
Novel Approach ◽  
Li Ion ◽  
Mechanical Separation ◽  
Pyrometallurgical Processing

The recovery of critical elements in recycling processes of complex high-tech products is often limited when applying only mechanical separation methods. A possible route is the pyrometallurgical processing that allows transferring of important critical elements into an alloy melt. Chemical rather ignoble elements will report in slag or dust. Valuable ignoble elements such as lithium should be recovered out of that material stream. A novel approach to accomplish this is enrichment in engineered artificial minerals (EnAM). An application with a high potential for resource efficient solutions is the pyrometallurgical processing of Li ion batteries. Starting from comparatively simple slag compositions such as the Li-Al-Si-Ca-O system, the next level of complexity is reached when adding Mg, derived from slag builders or other sources. Every additional component will change the distribution of Li between the compounds generated in the slag. Investigations with powder X-Ray diffraction (PXRD) and electron probe microanalysis (EPMA) of solidified melt of the five-compound system Li2O-MgO-Al2O3- SiO2-CaO reveal that Li can occur in various compounds from beginning to the end of the crystallization. Among these compounds are Li1−x(Al1−xSix)O2, Li1−xMgy(Al)(Al3/2y+xSi2−x−3/2y)O6, solid solutions of Mg1−(3/2y)Al2+yO4/LiAl5O8 and Ca-alumosilicate (melilite). There are indications of segregation processes of Al-rich and Si(Ca)-rich melts. The experimental results were compared with solidification curves via thermodynamic calculations of the systems MgO-Al2O3 and Li2O-SiO2-Al2O3.

Novel Approach of Improving Secondary Electron Detector in FIB System

2018 ◽  
Author(s):  
Steve Wang ◽  
Jim McGinn ◽  
Peter Tvarozek ◽  
Amir Weiss
Keyword(s):  
Integrated Circuit ◽  
Secondary Electron ◽  
Focused Ion Beam ◽  
Ion Beam ◽  
Vital Role ◽  
Electron Detector ◽  
System A ◽  
Novel Approach

Abstract Secondary electron detector (SED) plays a vital role in a focused ion beam (FIB) system. A successful circuit edit requires a good effective detector. Novel approach is presented in this paper to improve the performance of such a detector, making circuit altering for the most advanced integrated circuit (IC) possible.

scholarly journals Upscaling of LATP synthesis: Stoichiometric screening of phase purity and microstructure to ionic conductivity maps

Ionics ◽  
2021 ◽  
Vol 27 (5) ◽  
pp. 2017-2025
Author(s):  
Nikolas Schiffmann ◽  
Ethel C. Bucharsky ◽  
Karl G. Schell ◽  
Charlotte A. Fritsch ◽  
Michael Knapp ◽  
...  
Keyword(s):  
Ionic Conductivity ◽  
Sol Gel ◽  
Ion Conductivity ◽  
Process Window ◽  
Lithium Aluminum ◽  
Potential Candidate ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Battery Cell ◽  
Li Ion

AbstractLithium aluminum titanium phosphate (LATP) is known to have a high Li-ion conductivity and is therefore a potential candidate as a solid electrolyte. Via sol-gel route, it is already possible to prepare the material at laboratory scale in high purity and with a maximum Li-ion conductivity in the order of 1·10−3 s/cm at room temperature. However, for potential use in a commercial, battery-cell upscaling of the synthesis is required. As a first step towards this goal, we investigated whether the sol-gel route is tolerant against possible deviations in the concentration of the precursors. In order to establish a possible process window for sintering, the temperature interval from 800 °C to 1100 °C and holding times of 10 to 480 min were evaluated. The resulting phase compositions and crystal structures were examined by X-ray diffraction. Impedance spectroscopy was performed to determine the electrical properties. The microstructure of sintered pellets was analyzed by scanning electron microscopy and correlated to both density and ionic conductivity. It is shown that the initial concentration of the precursors strongly influences the formation of secondary phases like AlPO4 and LiTiOPO4, which in turn have an influence on ionic conductivity, densification behavior, and microstructure evolution.

scholarly journals Compositional Variation of Eudialyte-Group Minerals from the Lovozero and Ilímaussaq Complexes and on the Origin of Peralkaline Systems

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 548
Author(s):  
Lia N. Kogarko ◽  
Troels F. D. Nielsen
Keyword(s):  
Linear Trend ◽  
Major And Trace Elements ◽  
High Tech ◽  
Compositional Variation ◽  
Elemental Distribution ◽  
Magma Chambers ◽  
Eudialyte Group ◽  
System A ◽  
Distribution Of Elements ◽  
World Class

The Lovozero complex, Kola peninsula, Russia and the Ilímaussaq complex in Southwest Greenland are the largest known layered peralkaline intrusive complexes. Both host world-class deposits rich in REE and other high-tech elements. Both complexes expose spectacular layering with horizons rich in eudialyte group minerals (EGM). We present a detailed study of the composition and cryptic variations in cumulus EGM from Lovozero and a comparison with EGM from Ilímaussaq to further our understanding of peralkaline magma chambers processes. The geochemical signatures of Lovozero and Ilímaussaq EGM are distinct. In Lovozero EGMs are clearly enriched in Na + K, Mn, Ti, Sr and poorer Fe compared to EGM from Ilímaussaq, whereas the contents of ΣREE + Y and Cl are comparable. Ilímaussaq EGMs are depleted in Sr and Eu, which points to plagioclase fractionation and an olivine basaltic parent. The absence of negative Sr and Eu anomalies suggest a melanephelinitic parent for Lovozero. In Lovozero the cumulus EGMs shows decrease in Fe/Mn, Ti, Nb, Sr, Ba and all HREE up the magmatic layering, while REE + Y and Cl contents increase. In Lovozero EGM spectra show only a weak enrichment in LREE relative to HREE. The data demonstrates a systematic stratigraphic variation in major and trace elements compositions of liquidus EGM in the Eudialyte Complex, the latest and uppermost part of Lovozero. The distribution of elements follows a broadly linear trend. Despite intersample variations, the absence of abrupt changes in the trends suggests continuous crystallization and accumulation in the magma chamber. The crystallization was controlled by elemental distribution between EGM and coexisting melt during gravitational accumulation of crystals and/or mushes in a closed system. A different pattern is noted in the Ilimaussaq Complex. The elemental trends have variable steepness up the magmatic succession especially in the uppermost zones of the Complex. The differences between the two complexes are suggested to be related dynamics of the crystallization and accumulation processes in the magma chambers, such as arrival of new liquidus phases and redistributions by mush melts.

scholarly journals A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3825
Author(s):  
Ling-Yi Shen ◽  
Xiao-Li Chen ◽  
Xian-Jiong Yang ◽  
Hong Xu ◽  
Ya-Li Huang ◽  
...  
Keyword(s):  
High Selectivity ◽  
Fluorescence Probe ◽  
Stoichiometric Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Turn On ◽  
Imine Nitrogen ◽  
System A ◽  
Plot Analysis ◽  
L System

A novel turn-on fluorescence probe L has been designed that exhibits high selectivity and sensitivity with a detection limit of 9.53 × 10−8 mol/L for the quantification of Zn2+. 1H-NMR spectroscopy and single crystal X-ray diffraction analysis revealed the unsymmetrical nature of the structure of the Schiff base probe L. An emission titration experiment in the presence of different molar fractions of Zn2+ was used to perform a Job’s plot analysis. The results showed that the stoichiometric ratio of the complex formed by L and Zn2+ was 1:1. Moreover, the molecular structure of the mononuclear Cu complex reveals one ligand L coordinates with one Cu atom in the asymmetric unit. On adding CuCl2 to the ZnCl2/L system, a Cu-Zn complex was formed and a strong quenching behavior was observed, which inferred that the Cu2+ displaced Zn2+ to coordinate with the imine nitrogen atoms and hydroxyl oxygen atoms of probe L.

PEBB System Stability Margin Monitoring

2002 ◽  
Vol 8 (2) ◽  
pp. 261-276 ◽  
Author(s):  
Xiaogang Feng ◽  
Zhihong Ye ◽  
Fred C. Lee ◽  
Dushan Borojevic
Keyword(s):  
Stability Margin ◽  
System Stability ◽  
Linear Control ◽  
Small Signal ◽  
System A ◽  
Novel Approach ◽  
Implementation Approach ◽  
Dc Bus ◽  
Response Current ◽  
Measurement Approach

PEBB (power electronics building block) systems are typical nonlinear systems. Under the conventional but still popular linear control design, the system stability margin varies from one operating point to another. This paper introduces a novel approach to monitoring the DC bus stability margin of a PEBB system online. At the steady state of the system, a small-signal perturbation current î p is injected into the DC bus, and the load-side response current î L is measured. By checking the validation |î L ( jw)| < |î p ( jw)|, the system stability margin can be examined. Experiments on a 48 V DC DPS demonstrate the proposed measurement approach. An implementation approach is also proposed for an 800 V DC PEBB-based testbed system.

Research and Application on the Research Innovation Ability of the Graduate Student Based on the Fuzzy Neural Network

2014 ◽  
Vol 687-691 ◽  
pp. 2909-2912 ◽  
Author(s):  
Liang Hu ◽  
Gan Lan Yan ◽  
Long Li
Keyword(s):  
Innovation System ◽  
Scientific Research ◽  
Indicator System ◽  
High Tech ◽  
Design Work ◽  
Independent Innovation ◽  
System A ◽  
Evaluation Models ◽  
Fuzzy Neural ◽  
Innovation Ability

During the course of building an innovative country and enhancing the independent innovation capability, universities are the main force and the important source of high-tech innovation. The evaluation on the university's innovation ability, not only may improve university's efficiency and level of scientific research, but also make a significant sense to perfect the china' scientific research innovation system. Based on Referring to the recent research achievements at home and abroad, research and design work was carried out in the following area. Firstly, the multi-university research innovation ability evaluating indicator system is designed in this paper. By the principle of science and justice, through questionnaires, expert opinion and reference to relevant research results. The paper designed the multi-university's research innovation ability evaluating indicator system. A variety of typical evaluation models and methods are studied. Then two evaluation models between PCA-BP and PCA-FNN are taken into comparison. And the results show that the research and application of PCA-FNN is proved to be a new method and made a significant attempt for the university’s evaluation of research innovation ability.

Novel-shaped LiNi1/3Co1/3Mn1/3O2 prepared by a hydroxide coprecipitation method

2008 ◽  
Vol 80 (11) ◽  
pp. 2537-2542 ◽  
Author(s):  
Zexun Tang ◽  
Deshu Gao ◽  
Ping Chen ◽  
Zhaohui Li ◽  
Qiang Wu
Keyword(s):  
Specific Capacity ◽  
High Capacity ◽  
Coprecipitation Method ◽  
X Ray Diffraction ◽  
Capacity Retention ◽  
Uniform Size ◽  
Li Ion ◽  
New Generation ◽  
Optimized Conditions ◽  
Hydroxide Coprecipitation

Ni1/3Co1/3Mn1/3(OH)2, a precursor of LiNi1/3Co1/3Mn1/3O2 in new-generation Li-ion batteries, was prepared by a hydroxide coprecipitation method. Scanning electronic microscopy (SEM) micrographs reveal that the precursor particles thus obtained, show regular shape with uniform size under optimized conditions. X-ray diffraction (XRD) indicates that well-ordered layer-structured LiNi1/3Co1/3Mn1/3O2 was prepared after calcination at high temperature. The final product exhibited a spherical morphology with uniform size distribution (10 μm in diameter). At the terminal charging voltage of 4.3 and 4.5 V (vs. Li/Li+), the testing cells of LiNi1/3Co1/3Mn1/3O2 delivered a specific capacity of 161.2 and 184.1 mAh g-1, respectively. The high capacity retention of 98.0 and 96.1 % after charging to 4.3 and 4.5 V for 50 cycles, respectively, indicates that this material displays excellent cycling stability even at high cut-off voltage.

scholarly journals Multiscale Copper-µDiamond Nanostructured Composites

2012 ◽  
Vol 730-732 ◽  
pp. 925-930
Author(s):  
Daniela Nunes ◽  
Vanessa Livramento ◽  
Horácio Fernandes ◽  
Carlos Silva ◽  
Nobumitsu Shohoji ◽  
...  
Keyword(s):  
Pure Copper ◽  
Thermal Stabilization ◽  
Hot Extrusion ◽  
Processing Parameters ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optimal Processing ◽  
Novel Approach ◽  
Transmission Electron

Nanostructured copper-diamond composites can be tailored for thermal management applications at high temperature. A novel approach based on multiscale diamond dispersions is proposed for the production of this type of materials: a Cu-nDiamond composite produced by high-energy milling is used as a nanostructured matrix for further dispersion of micrometer sized diamond. The former offers strength and microstructural thermal stability while the latter provides high thermal conductivity. A series of Cu-nDiamond mixtures have been milled to define the minimum nanodiamond fraction suitable for matrix refinement and thermal stabilization. A refined matrix with homogenously dispersed nanoparticles could be obtained with 4 at.% nanodiamond for posterior mixture with mDiamond and subsequent consolidation. In order to define optimal processing parameters, consolidation by hot extrusion has been carried out for a Cu-nDiamond composite and, in parallel, for a mixture of pure copper and mDiamond. The materials produced were characterized by X-ray diffraction, scanning and transmission electron microscopy and microhardness measurements.

Sign in / Sign up

Export Citation Format

Share Document