scholarly journals Nanoporous High-Entropy Alloy by Liquid Metal Dealloying

Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1396 ◽  
Author(s):  
Artem Vladimirovich Okulov ◽  
Soo-Hyun Joo ◽  
Hyoung Seop Kim ◽  
Hidemi Kato ◽  
Ilya Vladimirovich Okulov
Keyword(s):  
Liquid Metal ◽  
Noble Metals ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
High Entropy Alloy ◽  
Rich Phase ◽  
High Entropy ◽  
Surface Areas ◽  
Bcc Structure

High-entropy nanomaterials possessing high accessible surface areas have demonstrated outstanding catalytic performance, beating that found for noble metals. In this communication, we report about the synthesis of a new, nanoporous, high-entropy alloy (HEA) possessing open porosity. The nanoporous, high-entropy Ta19.1Mo20.5Nb22.9V30Ni7.5 alloy (at%) was fabricated from a precursor (TaMoNbV)25Ni75 alloy (at%) by liquid metal dealloying using liquid magnesium (Mg). Directly after dealloying, the bicontinuous nanocomposite consisting of a Mg-rich phase and a phase with a bulk-centered cubic (bcc) structure was formed. The Mg-rich phase was removed with a 3M aqueous solution of nitric acid to obtain the open, porous, high-entropy Ta19.1Mo20.5Nb22.9V30Ni7.5 alloy (at%). The ligament size of this nanoporous HEA is about 69 ± 9 nm, indicating the high surface area in this material.

Large-scale and facile synthesis of a porous high-entropy alloy CrMnFeCoNi as an efficient catalyst

2020 ◽  
Vol 8 (35) ◽  
pp. 18318-18326 ◽  
Author(s):  
Hailong Peng ◽  
Yangcenzi Xie ◽  
Zicheng Xie ◽  
Yunfeng Wu ◽  
Wenkun Zhu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Surface Area ◽  
Large Scale ◽  
High Surface ◽  
High Surface Area ◽  
Catalytic Performance ◽  
High Entropy Alloy ◽  
Facile Synthesis ◽  
Efficient Catalyst ◽  
High Entropy

Porous high entropy alloy CrMnFeCoNi exhibited remarkable catalytic activity and stability toward p-nitrophenol hydrogenation. The enhanced catalytic performance not only resulted from the high surface area, but also from exposed high-index facets with terraces.

scholarly journals Corrosion Behavior and Surface Treatment of Cladding Materials Used in High-Temperature Lead-Bismuth Eutectic Alloy: A Review

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 364
Author(s):  
Hao Wang ◽  
Jun Xiao ◽  
Hui Wang ◽  
Yong Chen ◽  
Xing Yin ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Liquid Metal ◽  
Energy Demand ◽  
Ceramic Coatings ◽  
High Entropy Alloy ◽  
Pressurized Water ◽  
Corrosion Morphology ◽  
High Entropy ◽  
Lead Bismuth Eutectic

Liquid metal fast reactors were considered to be the most promising solution to meet the enormous energy demand in the future. However, corrosion phenomenon caused by the liquid metal, especially in high-temperature lead-bismuth coolant, has greatly hindered the commercialization of the advanced Generation-IV nuclear system. This review discussed current research on the corrosion resistance of structural materials (such as EP823, T91, ODS, and authentic steels) in high-temperature liquid metal served as reactor coolants. The current corrosion resistance evaluation has proved that even for the excellent performance of EP823, the structural material selected in pressurized water reactor is not the ideal material for operation in the high-temperature lead-bismuth eutectic (LBE). Furthermore, the latest coating technologies that are expected to be applied to cladding materials for coolant system were extensively discussed, including Al-containing coatings, ceramic coatings, oxide coatings, amorphous coatings and high-entropy alloy coatings. The detailed comparison summarized the corrosion morphology and corrosion products of various coatings in LBE. This review not only provided a systematic understanding of the corrosion phenomena, but also demonstrated that coating technology is an effective method to solve the corrosion issues of the advanced next-generation reactors.

Efficient and Reusable Silica Gel Supported Metal Ionic Liquid Catalysts for Palmitic Acid Esterification to Biodiesel

2021 ◽  
Vol 43 (1) ◽  
pp. 1-1
Author(s):  
Guo Yingwei Guo Yingwei ◽  
Chen Xuedan Chen Xuedan ◽  
Yan Shiting Yan Shiting ◽  
Zhang Zhengliang Zhang Zhengliang ◽  
Chen Yuqin Chen Yuqin ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Palmitic Acid ◽  
Silica Gel ◽  
High Surface ◽  
High Surface Area ◽  
Kinetic Studies ◽  
Catalytic Performance ◽  
Reaction Conditions ◽  
Acid Esterification ◽  
Supported Metal

A series of silica gel (SG) supported metal ionic liquid catalysts (x[Bmim]Cl-CrCl3/SG) were synthesized and exploited for the esterification of palmitic acid (PA) with methanol (ML) to produce biodiesel efficiently. The 10%[Bmim]Cl-CrCl3/SG catalyst with high surface area and desirable acidity exhibited the best catalytic performance and reusability after six consecutive running cycles. Based on the response surface analysis, the optimal reaction conditions were obtained as follows: methanol/acid mole ratio = 11:1 mol/mol, catalyst amount = 5.3 wt%, reaction time = 65 min, as well as reaction temperature = 373 K, reaching to a biodiesel yield of 96.1%. Further kinetic studies demonstrated that the esterification of PA with ML obeyed 1.41 order kinetics for acid concentration with the activation energy of 16.88 kJ/mol

Dislocation-driven high catalytic performance of FeCoNiCrMn high-entropy alloy for the hydrolysis of NaBH4

2021 ◽  
Vol 119 (12) ◽  
pp. 121901
Author(s):  
Juan Mu ◽  
Yongqing Ye ◽  
Jiale Wang ◽  
Zhengwang Zhu ◽  
Yandong Wang ◽  
...  
Keyword(s):  
Catalytic Performance ◽  
High Entropy Alloy ◽  
High Entropy ◽  
Hydrolysis Of ◽  
Hydrolysis Of Nabh4

scholarly journals High surface area nitrogen-functionalized Ni nanozymes for efficient peroxidase-like catalytic activity

PLoS ONE ◽  
2021 ◽  
Vol 16 (10) ◽  
pp. e0257777
Author(s):  
Anuja Tripathi ◽  
Kenneth D. Harris ◽  
Anastasia L. Elias
Keyword(s):  
Catalytic Activity ◽  
Plasma Treatment ◽  
Surface Composition ◽  
Point Of Care ◽  
High Surface ◽  
Effective Means ◽  
High Surface Area ◽  
Catalytic Performance ◽  
Optimal Time ◽  
Ammonia Plasma

Nitrogen-functionalization is an effective means of improving the catalytic performances of nanozymes. In the present work, plasma-assisted nitrogen modification of nanocolumnar Ni GLAD films was performed using an ammonia plasma, resulting in an improvement in the peroxidase-like catalytic performance of the porous, nanostructured Ni films. The plasma-treated nanozymes were characterized by TEM, SEM, XRD, and XPS, revealing a nitrogen-rich surface composition. Increased surface wettability was observed after ammonia plasma treatment, and the resulting nitrogen-functionalized Ni GLAD films presented dramatically enhanced peroxidase-like catalytic activity. The optimal time for plasma treatment was determined to be 120 s; when used to catalyze the oxidation of the colorimetric substrate TMB in the presence of H2O2, Ni films subjected to 120 s of plasma treatment yielded a much higher maximum reaction velocity (3.7⊆10−8 M/s vs. 2.3⊆10−8 M/s) and lower Michaelis-Menten coefficient (0.17 mM vs. 0.23 mM) than pristine Ni films with the same morphology. Additionally, we demonstrate the application of the nanozyme in a gravity-driven, continuous catalytic reaction device. Such a controllable plasma treatment strategy may open a new door toward surface-functionalized nanozymes with improved catalytic performance and potential applications in flow-driven point-of-care devices.

Synthesis and Characterization of Aerogel-derived Cation-substituted Hexaaluminates

1996 ◽  
Vol 457 ◽  
Author(s):  
Lin-chiuan Yan ◽  
Levi T. Thompson
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Catalytic Combustion ◽  
High Surface ◽  
High Surface Area ◽  
Synthesis And Characterization ◽  
New Methods ◽  
Surface Areas ◽  
Different Characteristics

ABSTRACTNew methods have been developed for the synthesis of high surface area cation-substituted hexaaluminates. These materials were prepared by calcining high temperature (ethanol extraction) or low temperature (CO2 extraction) aerogels at temperatures up to 1600°C. Cation-substituted hexaaluminates have emerged as promising catalysts for use in high temperature catalytic combustion. In comparing unsubstituted and cation-substituted hexaaluminates, we found that the phase transformations were much cleaner for the cation-substituted materials. BaCO3 and BaAl2O4 were intermediates during transformation of the unsubstituted materials, while the cation-substituted materials transformed directly from an amorphous phase to crystalline hexaaluminate. Moreover, the presence of substitution cations caused the transformation to occur at lower temperatures. Mn seems to be a better substitution cation than Co since the Mn-substituted materials exhibited higher surface areas and better heat resistances than the Co-substituted materials. The low temperature aerogel-derived materials possessed quite different characteristics from the high temperature aerogel-derived materials. For example, phase transformation pathways were different.

scholarly journals Characterization of Ag:Zno Thin Films and Their Use in Photoelectrocatalytic Degradation Of Methylene Blue (Mb)

2018 ◽  
Vol 22 (2) ◽  
pp. 109-116
Author(s):  
Bhishma Karki ◽  
Jeevan Jyoti Nakarmi ◽  
Rhiddi Bir Singh ◽  
Manish Banerjee
Keyword(s):  
Noble Metals ◽  
Spray Pyrolysis Technique ◽  
High Surface ◽  
High Surface Area ◽  
Nano Particles ◽  
Mixed Metal Oxide ◽  
Design And Synthesis ◽  
In Situ Deposition ◽  
Photoelectrocatalytic Degradation ◽  
Challenges And Opportunities

The synthesis of functional nano-particles via spray pyrolysis technique (SPT), especially those of catalytic nature, has attracted the interests of scientists and engineers, as well as industries. The rapid and high temperature continuous synthesis yields nano-particles with intrinsic features of active catalysts, that is, high surface area and surface energetic. For these reasons, SPT finds applications in various thermally inducible catalytic reactions. However, the design and synthesis of photocatalysts by SPT requires a knowledge set which is different from that established for thermal catalysts. Unknown to many, this has resulted in frustrations to those entering the field unprepared, especially since SPT appears to be an elegant tool in synthesizing oxide nano-particles of any elemental construct. From simple oxide to doped-oxide, and mixed metal oxide to the in situ deposition of noble metals, this Perspective gives an overview on the development of photocatalysts made by SPT in the last decade that led to a better understanding of the design criteria. Various challenges and opportunities are also highlighted; especially those beyond simple metal oxides, which perhaps contain the greatest potential for the exploitation of photocatalysts design by SPT. Journal of Institute of Science and TechnologyVolume 22, Issue 2, January 2018, Page: 109-116

Efficient and Reusable Silica Gel Supported Metal Ionic Liquid Catalysts for Palmitic Acid Esterification to Biodiesel

2021 ◽  
Vol 43 (1) ◽  
pp. 1-1
Author(s):  
Guo Yingwei Guo Yingwei ◽  
Chen Xuedan Chen Xuedan ◽  
Yan Shiting Yan Shiting ◽  
Zhang Zhengliang Zhang Zhengliang ◽  
Chen Yuqin Chen Yuqin ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Palmitic Acid ◽  
Silica Gel ◽  
High Surface ◽  
High Surface Area ◽  
Kinetic Studies ◽  
Catalytic Performance ◽  
Reaction Conditions ◽  
Acid Esterification ◽  
Supported Metal

A series of silica gel (SG) supported metal ionic liquid catalysts (x[Bmim]Cl-CrCl3/SG) were synthesized and exploited for the esterification of palmitic acid (PA) with methanol (ML) to produce biodiesel efficiently. The 10%[Bmim]Cl-CrCl3/SG catalyst with high surface area and desirable acidity exhibited the best catalytic performance and reusability after six consecutive running cycles. Based on the response surface analysis, the optimal reaction conditions were obtained as follows: methanol/acid mole ratio = 11:1 mol/mol, catalyst amount = 5.3 wt%, reaction time = 65 min, as well as reaction temperature = 373 K, reaching to a biodiesel yield of 96.1%. Further kinetic studies demonstrated that the esterification of PA with ML obeyed 1.41 order kinetics for acid concentration with the activation energy of 16.88 kJ/mol

Sign in / Sign up

Export Citation Format

Share Document