scholarly journals Microstructural Characteristics of AlSi9Cu3(Fe) Alloy with High Melting Point Elements

Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1278 ◽  
Author(s):  
Tomasz Szymczak ◽  
Grzegorz Gumienny ◽  
Leszek Klimek ◽  
Marcin Goły ◽  
Tadeusz Pacyniak
Keyword(s):  
High Pressure ◽  
Melting Point ◽  
Base Alloy ◽  
Die Casting ◽  
Area Fraction ◽  
High Melting ◽  
High Melting Point ◽  
High Pressure Die Casting ◽  
Pressure Die Casting ◽  
3Si2 Phase

The paper presents the results of microstructure tests of EN AC-46000 hypoeutectic Al–Si alloy with and without high-melting-point elements: chromium, molybdenum, vanadium, and tungsten. The above-mentioned elements were used individually or simultaneously in various combinations. The tested castings were made using two technologies: shell molding and high pressure die casting (HPDC). Using X-ray diffraction and microanalysis of the chemical composition an attempt to determine the phase structure of the tested alloy was made. It has been shown that the microstructure of the base alloy consists of dendrites of α(Al) solid solution and complex eutectic mixtures: ternary α(Al) + Al15(Fe,Mn)3Si2 + β(Si) and quaternary α(Al) + Al2Cu + AlSiCuFeMgMnNi + β(Si). High-melting point elements, regardless of the combination used, attach mainly to intermetallic phases rich in Fe and form the Al15(Fe,Mn,M)3Si2 phase, where M is any high melting point element or a combination of such elements. It has been shown that the area fraction of the above-mentioned phase increases with increasing content of high melting point elements. A greater area fraction of the Al15(Fe,Mn,M)3Si2 phase in the casting from the shell mold in relation to the high pressure die casting has been also found.

scholarly journals Characteristics of Al-Si Alloys with High Melting Point Elements for High Pressure Die Casting

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4861
Author(s):  
Tomasz Szymczak ◽  
Grzegorz Gumienny ◽  
Leszek Klimek ◽  
Marcin Goły ◽  
Jan Szymszal ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
Melting Point ◽  
Crystallization Process ◽  
Die Casting ◽  
Hypoeutectic Alloy ◽  
High Melting ◽  
High Melting Point ◽  
High Pressure Die Casting ◽  
Pressure Die Casting

This paper is devoted to the possibility of increasing the mechanical properties (tensile strength, yield strength, elongation and hardness) of high pressure die casting (HPDC) hypoeutectic Al-Si alloys by high melting point elements: chromium, molybdenum, vanadium and tungsten. EN AC-46000 alloy was used as a base alloy. The paper presents the effect of Cr, Mo, V and W on the crystallization process and the microstructure of HPDC aluminum alloy as well as an alloy from the shell mold. Thermal and derivative analysis was used to study the crystallization process. The possibility of increasing the mechanical properties of HPDC hypoeutectic alloy by addition of high-melting point elements has been demonstrated.

A Development of Virtual Manufacturing System for Magnesium High Pressure Die Casting Processes

Materials ◽  
2003 ◽  
Author(s):  
Weilong Chen
Keyword(s):  
High Pressure ◽  
Magnesium Alloys ◽  
Die Casting ◽  
Virtual Manufacturing ◽  
Mold Design ◽  
High Pressure Die Casting ◽  
Molten Magnesium ◽  
Pressure Die Casting ◽  
Soft And Hardware ◽  
Free Magnesium

In recent years, high-pressure die-casting magnesium components have been gaining currency worldwide because of the excellent properties that magnesium alloys can offer to meet new product requirements. With the increasing application of magnesium parts worldwide, many research and development projects have been carried out to advance HPDC technology. However, truly optimized mold design and production of defect free castings remains a challenge for die casters. For many HPDC magnesium products, especially those specified for porosity-free and high cosmetic requirement, the challenge not only comes form a lack of a deeper understanding of how molten magnesium alloys fill the mold cavity and form defects, but also from improper preliminary part design. This study proposes a virtual prototyping system that integrates several effective soft and hardware tools for both the part and mold-design engineer to evaluate part manufacturability. Also, investigated in this study are the major causes of those defects that are the predominant cause of rejection of thin walled, leak-free magnesium parts requiring highly cosmetic finishes.

scholarly journals On the Use of Conformal Cooling in High-Pressure Die-Casting and Semisolid Casting

Technologies ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 39
Author(s):  
Anders E. W. Jarfors ◽  
Ruslan Sevastopol ◽  
Karamchedu Seshendra ◽  
Qing Zhang ◽  
Jacob Steggo ◽  
...  
Keyword(s):  
High Pressure ◽  
Die Casting ◽  
Life Extension ◽  
Conformal Cooling ◽  
High Pressure Die Casting ◽  
Cooling Channels ◽  
Die Life ◽  
Die Materials ◽  
Pressure Die Casting ◽  
Semisolid Casting

Today, tool life in high pressure die casting (HPDC) is of growing interest. A common agreement is that die life is primarily decided by the thermal load and temperature gradients in the die materials. Conformal cooling with the growth of additive manufacturing has raised interest as a means of extending die life. In the current paper, conformal cooling channels’ performance and effect on the thermal cycle in high-pressure die casting and rheocasting are investigated for conventional HPDC and semisolid processing. It was found that conformal cooling aids die temperature reduction, and the use of die spray may be reduced and support the die-life extension. For the die filling, the increased temperature was possibly counterproductive. Instead, it was found that the main focus for conformal cooling should be focused to manage temperature around the in-let bushing and possibly the runner system. Due to the possible higher inlet pressures for semisolid casting, particular benefits could be seen.

Failure analysis of H13 steel die for high pressure die casting Al alloy

2021 ◽  
pp. 105330
Author(s):  
Rengen Ding ◽  
Haibo Yang ◽  
Shuzhi Li ◽  
Guodong Wu ◽  
Jiahao Mo ◽  
...  
Keyword(s):  
High Pressure ◽  
Failure Analysis ◽  
Die Casting ◽  
Al Alloy ◽  
H13 Steel ◽  
High Pressure Die Casting ◽  
Pressure Die Casting

scholarly journals A digital twin approach to predict and compensate distortion in a High Pressure Die Casting (HPDC) process chain

2020 ◽  
Vol 52 ◽  
pp. 144-149
Author(s):  
Alireza Ebrahimi ◽  
Udo Fritsching ◽  
Michael Heuser ◽  
Dirk Lehmhus ◽  
Adrian Struß ◽  
...  
Keyword(s):  
High Pressure ◽  
Die Casting ◽  
Process Chain ◽  
High Pressure Die Casting ◽  
Digital Twin ◽  
Pressure Die Casting
Sign in / Sign up

Export Citation Format

Share Document