scholarly journals Wear Characteristics of Superalloy and Hardface Coatings in Gas Turbine Applications–A Review

Metals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1171
Author(s):  
Ahmad Afiq Pauzi ◽  
Mariyam Jameelah Ghazali ◽  
Wan Fathul Hakim W. Zamri ◽  
Armin Rajabi
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Research Field ◽  
Fatigue Wear ◽  
Hastelloy X ◽  
Hot Gas ◽  
Hard Particles ◽  
Critical Components ◽  
Improve Wear Resistance

In the gas-turbine research field, superalloys are some of the most widely used materials as they offer excellent strength, particularly at extreme temperatures. Vital components such as combustion liners, transition pieces, blades, and vanes, which are often severely affected by wear, have been identified. These critical components are exposed to very high temperatures (ranging from 570 to 1300 °C) in hot-gas-path systems and are generally subjected to heavy repair processes for maintenance works. Major degradation such as abrasive wear and fretting fatigue wear are predominant mechanisms in combustion liners and transition pieces during start–stop or peaking operation, resulting in high cost if inadequately protected. Another type of wear-like erosion is also prominent in turbine blades and vanes. Nimonic 263, Hastelloy X, and GTD 111 are examples of superalloys used in the gas-turbine industry. This review covers the development of hardface coatings used to protect the surfaces of components from wear and erosion. The application of hardface coatings helps reduce friction and wear, which can increase the lifespan of materials. Moreover, chromium carbide and Stellite 6 hardface coatings are widely used for hot-section components in gas turbines because they offer excellent resistance against wear and erosion. The effectiveness of these coatings to mitigate wear and increase the performance is further investigated. We also discuss in detail the current developments in combining these coating with other hard particles to improve wear resistance. The principles of this coating development can be extended to other high-temperature applications in the power-generation industry.

Repair of Advanced Gas Turbine Blades

2005 ◽  
Author(s):  
Julie McGraw ◽  
Reiner Anton ◽  
Christian Ba¨hr ◽  
Mary Chiozza
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
High Efficiency ◽  
High Reliability ◽  
Turbine Blades ◽  
Base Material ◽  
Operating Experience ◽  
Cost Effective ◽  
Directionally Solidified ◽  
Hot Gas

In order to promote high efficiency combined with high power output, reliability, and availability, Siemens advanced gas turbines are equipped with state-of-the-art turbine blades and hot gas path parts. These parts embody the latest developments in base materials (single crystal and directionally solidified), as well as complex cooling arrangements (round and shaped holes) and coating systems. A modern gas turbine blade (or other hot gas path part) is a duplex component consisting of base material and coating system. Planned recoating and repair intervals are established as part of the blade design. Advanced repair technologies are essential to allow cost-effective refurbishing while maintaining high reliability. This paper gives an overview of the operating experience and key technologies used to repair these parts.

Development and Fabrication of Silicon Nitride Components for Ceramic Gas Turbine

1997 ◽  
Author(s):  
Keisuke Makino ◽  
Ken-Ichi Mizuno ◽  
Toru Shimamori
Keyword(s):  
High Temperature ◽  
Silicon Nitride ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Turbine Blades ◽  
High Strength ◽  
Inlet Temperature ◽  
Turbine Inlet Temperature ◽  
Spark Plug ◽  
Power Turbine

NGK Spark Plug Co., Ltd. has been developing various silicon nitride materials, and the technology for fabricating components for ceramic gas turbines (CGT) using theses materials. We are supplying silicon nitride material components for the project to develop 300 kW class CGT for co-generation in Japan. EC-152 was developed for components that require high strength at high temperature, such as turbine blades and turbine nozzles. In order to adapt the increasing of the turbine inlet temperature (TIT) up to 1,350 °C in accordance with the project goals, we developed two silicon nitride materials with further unproved properties: ST-1 and ST-2. ST-1 has a higher strength than EC-152 and is suitable for first stage turbine blades and power turbine blades. ST-2 has higher oxidation resistance than EC-152 and is suitable for power turbine nozzles. In this paper, we report on the properties of these materials, and present the results of evaluations of these materials when they are actually used for CGT components such as first stage turbine blades and power turbine nozzles.

Pulsed Impingement Turbine Cooling and its Effect on the Efficiency of Gas Turbines With Pressure Gain Combustion

2020 ◽  
Author(s):  
Nicolai Neumann ◽  
Dieter Peitsch ◽  
Arne Berthold ◽  
Frank Haucke ◽  
Panagiotis Stathopoulos
Keyword(s):  
Gas Turbine ◽  
Thermal Efficiency ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Impingement Cooling ◽  
Turbine Cooling ◽  
Pressure Gain Combustion ◽  
Cooling Air ◽  
Gas Turbine Cycle ◽  
Cycle Efficiency

Abstract Performance improvements of conventional gas turbines are becoming increasingly difficult and costly to achieve. Pressure Gain Combustion (PGC) has emerged as a promising technology in this respect, due to the higher thermal efficiency of the respective ideal gas turbine cycle. Previous cycle analyses considering turbine cooling methods have shown that the application of pressure gain combustion may require more turbine cooling air. This has a direct impact on the cycle efficiency and reduces the possible efficiency gain that can potentially be harvested from the new combustion technology. Novel cooling techniques could unlock an existing potential for a further increase in efficiency. Such a novel turbine cooling approach is the application of pulsed impingement jets inside the turbine blades. In the first part of this paper, results of pulsed impingement cooling experiments on a curved plate are presented. The potential of this novel cooling approach to increase the convective heat transfer in the inner side of turbine blades is quantified. The second part of this paper presents a gas turbine cycle analysis where the improved cooling approach is incorporated in the cooling air calculation. The effect of pulsed impingement cooling on the overall cycle efficiency is shown for both Joule and PGC cycles. In contrast to the authors’ anticipation, the results suggest that for relevant thermodynamic cycles pulsed impingement cooling increases the thermal efficiency of Joule cycles more significantly than it does in the case of PGC cycles. Thermal efficiency improvements of 1.0 p.p. for pure convective cooling and 0.5 p.p. for combined convective and film with TBC are observed for Joule cycles. But just up to 0.5 p.p. for pure convective cooling and 0.3 p.p. for combined convective and film cooling with TBC are recorded for PGC cycles.

State-of-the-Art Review of Closed Cycle Gas Turbines Burning Dirty Fuels

1983 ◽  
Author(s):  
G. E. Provenzale
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Detailed Examination ◽  
Full Potential ◽  
Development Programs ◽  
Closed Cycle ◽  
Cost Information ◽  
Steam Power ◽  
Critical Components

The Closed Cycle Gas Turbine (CCGT) offers potential savings in operating costs due to high system efficiency and the ability to direct fire coal. However, for the full potential of CCGT to be realized, more competitive cost information must be generated, correlated, and compared with conventional steam power systems. Current development programs are intended to resolve many of the remaining uncertainties in design, performance, and cost by detailed examination and testing of critical components of CCGT coal-fired power systems. This paper reviews current technology developments and economic considerations of the closed cycle gas turbine burning dirty fuels versus conventional steam power systems.

Coal-Water Slurry Testing of an Industrial Gas Turbine

1992 ◽  
Author(s):  
R. A. Wenglarz ◽  
C. Wilkes ◽  
R. C. Bourke ◽  
H. C. Mongia
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Water Injection ◽  
Department Of Energy ◽  
Combustion System ◽  
Hot Gas ◽  
Water Slurry ◽  
Coal Water Slurry ◽  
Burning Coal ◽  
Industrial Gas Turbine

This paper describes the first test of an industrial gas turbine and low emissions combustion system on coal-water-slurry fuel. The engine and combustion system have been developed over the past five years as part of the Heat Engines program sponsored by the Morgantown Energy Technology Center of the U.S. Department of Energy (DOE). The engine is a modified Allison 501-K industrial gas turbine designed to produce 3.5 MW of electrical power when burning natural gas or distillate fuel. Full load power output increases to approximately 4.9 MW when burning coal-water slurry as a result of additional turbine mass flow rate. The engine has been modified to accept an external staged combustion system developed specifically for burning coal and low quality ash-bearing fuels. Combustion staging permits the control of NOx from fuel-bound nitrogen while simultaneously controlling CO emissions. Water injection freezes molten ash in the quench zone located between the rich and lean zones. The dry ash is removed from the hot gas stream by two parallel cyclone separators. This paper describes the engine and combustor system modifications required for running on coal and presents the emissions and turbine performance data from the coal-water slurry testing. Included is a discussion of hot gas path ash deposition and planned future work that will support the commercialization of coal-fired gas turbines.

Coupled Thermo-Mechanical Fatigue Tests for Simulating Load Conditions in Cooled Turbine Parts

2011 ◽  
Author(s):  
Roland Mu¨cke ◽  
Klaus Rau
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Mechanical Load ◽  
Fatigue Tests ◽  
Temperature Fields ◽  
Hot Gas ◽  
Mechanical Fatigue ◽  
Numerical Predictions ◽  
Temperature Capability ◽  
Load Conditions

Modern heavy-duty gas turbines operate under hot gas temperatures that are much higher than the temperature capability of nickel superalloys. For that reason, advanced cooling technology is applied for reducing the metal temperature to an acceptable level. Highly cooled components, however, are characterised by large thermal gradients resulting in inhomogeneous temperature fields and complex thermo-mechanical load conditions. In particular, the different rates of stress relaxation due to the different metal temperatures on hot gas and cooling air exposed surfaces lead to load redistributions in cooled structures, which have to be considered in the lifetime prediction methodology. In this context, the paper describes Coupled Thermo-Mechanical Fatigue (CTMF) tests for simultaneously simulating load conditions on hot and cold surfaces of cooled turbine parts, Refs [1, 2]. In contrary to standard Thermo-Mechanical Fatigue (TMF) testing methods, CTMF tests involve the interaction between hot and cold regions of the parts and thus more closely simulates the material behaviour in cooled gas turbine structures. The paper describes the methodology of CTMF tests and their application to typical load conditions in cooled gas turbine parts. Experimental results are compared with numerical predictions showing the advantages of the proposed testing method.

Assessing of Hot Gas Parts Using Advanced Eddy Current Testing Methods

2008 ◽  
Author(s):  
Matthias Jungbluth ◽  
Vinay Jonnalagadda ◽  
Erwan Baleine ◽  
Mattias Broddega˚rd ◽  
Rolf Wilkenho¨ner ◽  
...  
Keyword(s):  
Eddy Current ◽  
Gas Turbines ◽  
Thermal Protection ◽  
Protective Coatings ◽  
Turbine Blades ◽  
Diagnostic Methods ◽  
Design Parameters ◽  
Gas Temperature ◽  
Diagnostic Measures ◽  
Hot Gas

The turbine section of state-of-the-art industrial gas turbines is exposed to the most severe conditions such as high temperatures, corrosive environments and high mechanical stresses for several tens of thousands of hours. To withstand these conditions, turbine blades and vanes have become the most sophisticated parts. This, together with advanced manufacturing technologies, strict quality requirements and maximum reliability demands, affects costs. Different design features have been realized in the past to meet the ambitious requirements, and are also under constant development. Blades and vanes made of superalloys with directionally-solidified or single-crystal structure are used to provide highest strengths at temperatures as near as possible to the hot gas temperature. The high integrity and conformity of the parts are required to realize the material potential. Different advanced diagnostic methods are applied to ensure these over time. Another way to increase the operating temperatures of gas turbines is the application of corrosion and thermal protection coatings for one or several rows of the blades and vanes. Deviations in the specified coating thickness tend to reduce the lifetime of such coatings significantly. Hence, the monitoring of this property during the manufacturing requires special nondestructive diagnostic measures. Service exposed parts, which need to be refurbished when the protective coatings are spent, offer a significant operation potential after refurbishment. To guarantee the design parameters during the next service interval, several nondestructive material evaluation methods are available for the necessary part property assessment. Multifrequency Eddy Current has proven itself as an appropriate NDE technique to accomplish the above diagnostic requirements. The paper will give an overview of results gained at Siemens with model based Eddy Current methods using measurement systems developed by Jentek Sensors Inc., USA, and CESI, Italy. Potential applications and limitations of the method also will be discussed.

Repair of Advanced Gas Turbine Blades

2007 ◽  
Author(s):  
Reiner Anton ◽  
Brigitte Heinecke ◽  
Michael Ott ◽  
Rolf Wilkenhoener
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Life Cycle Cost ◽  
High Efficiency ◽  
High Reliability ◽  
Turbine Blades ◽  
Cost Effective ◽  
Complex Nature ◽  
Thin Wall ◽  
Advanced Technologies

The availability and reliability of gas turbine units are critical for success to gas turbine users. Advanced hot gas path components that are used in state-of-the-art gas turbines have to ensure high efficiency, but require advanced technologies for assessment during maintenance inspections in order to decide whether they should be reused or replaced. Furthermore, advanced repair and refurbishment technologies are vital due to the complex nature of such components (e.g., Directionally Solidified (DS) / Single Crystal (SC) materials, thin wall components, new cooling techniques). Advanced repair technologies are essential to allow cost effective refurbishing while maintaining high reliability, to ensure minimum life cycle cost. This paper will discuss some aspects of Siemens development and implementation of advanced technologies for repair and refurbishment. In particular, the following technologies used by Siemens will be addressed: • Weld restoration; • Braze restoration processes; • Coating; • Re-opening of cooling holes.

Development and Testing of Harsh Environment, Wireless Sensor Systems for Industrial Gas Turbines

2009 ◽  
Author(s):  
David Mitchell ◽  
Anand Kulkarni ◽  
Alex Lostetter ◽  
Marcelo Schupbach ◽  
John Fraley ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Turbine Blades ◽  
Operating Conditions ◽  
Condition Based Maintenance ◽  
Harsh Environment ◽  
Sensor Systems ◽  
Wireless Telemetry ◽  
Industrial Gas Turbines

The potential for savings provided to worldwide operators of industrial gas turbines, by transitioning from the current standard of interval-based maintenance to condition-based maintenance may be in the hundreds of millions of dollars. In addition, the operational flexibility that may be obtained by knowing the historical and current condition of life-limiting components will enable more efficient use of industrial gas turbine resources, with less risk of unplanned outages as a result of off-parameter operations. To date, it has been impossible to apply true condition-based maintenance to industrial gas turbines because the extremely harsh operating conditions in the heart of a gas turbine preclude using the necessary advanced sensor systems to monitor the machine’s condition continuously. Siemens, Rove Technical Services, and Arkansas Power Electronics International are working together to develop a potentially industry-changing technology to build smart, self-aware engine components that incorporate embedded, harsh-environment-capable sensors and high temperature capable wireless telemetry systems for continuously monitoring component condition in the hot gas path turbine sections. The approach involves embedding sensors on complex shapes, such as turbine blades, embedding wireless telemetry systems in regions with temperatures that preclude the use of conventional silicon-based electronics, and successfully transmitting the sensor information from an environment very hostile to wireless signals. The results presented will include those from advanced, harsh environment sensor and wireless telemetry component development activities. In addition, results from laboratory and high temperature rig and spin testing will be discussed.

Investigation of Flow Instabilities Near the Rim Cavity of a 1.5 Stage Gas Turbine

2009 ◽  
Author(s):  
M. Rabs ◽  
F.-K. Benra ◽  
H. J. Dohmen ◽  
O. Schneider
Keyword(s):  
Gas Turbine ◽  
Mass Flow ◽  
Gas Turbines ◽  
Flow Instabilities ◽  
Navier Stokes ◽  
Flow Rates ◽  
Air Mass ◽  
Hot Gas ◽  
Path Modelling ◽  
Mass Flow Rates

The present paper gives a contribution to a better understanding of the flow at the rim and in the wheel space of gas turbines. Steady state and time-accurate numerical simulations with a commercial Navier-Stokes solver for a 1.5 stage turbine similar to the model treated in the European Research Project ICAS-GT were conducted. In the framework of a numerical analysis, a validation with experimental results of the test rig at the Technical University of Aachen will be given. In preceding numerical investigations of realistic gas turbine rim cavities with a simplified treatment of the hot gas path (modelling of the main flow path without blades and vanes), so called Kelvin-Helmholtz vortices were found in the area of the gap when using appropriate boundary conditions. The present work shows that these flow instabilities also occur in a 1.5 stage gas turbine model with consideration of the blades and vanes. Therefore, several simulations with different sealing air mass flow rates (CW 7000, 20000, 30000) have been conducted. The results show, that for high sealing air mass flow rates Kelvin-Helmholtz Instabilities are developing. These vortices significantly coin the flow at the rim.

Sign in / Sign up

Export Citation Format

Share Document