scholarly journals Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM)

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 629
Author(s):  
Anagh Deshpande ◽  
Subrata Deb Nath ◽  
Sundar Atre ◽  
Keng Hsu
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Mechanical Property ◽  
High Temperature ◽  
Selective Laser Melting ◽  
Laser Melting ◽  
Step Heat Treatment ◽  
Microstructure And Mechanical Property ◽  
In Situ Heat Treatment

Selective laser melting (SLM) is one of the most widely used additive manufacturing technologies. Fabricating nickel-based superalloys with SLM has garnered significant interest from the industry and the research community alike due to the excellent high temperature properties and thermal stability exhibited by the alloys. Haynes-282 alloy, a γ′-phase strengthened Ni-based superalloy, has shown good high temperature mechanical properties comparable to alloys like R-41, Waspaloy, and 263 alloy but with better fabricability. A study and comparison of the effect of different heat-treatment routes on microstructure and mechanical property evolution of Haynes-282 fabricated with SLM is lacking in the literature. Hence, in this manuscript, a thorough investigation of microstructure and mechanical properties after a three-step heat treatment and hot isostatic pressing (HIP) has been conducted. In-situ heat-treatment experiments were conducted in a transmission electron microscopy (TEM) to study γ′ precipitate evolution. γ′ precipitation was found to start at 950 °C during in-situ heat-treatment. Insights from the in-situ heat-treatment were used to decide the aging heat-treatment for the alloy. The three-step heat-treatment was found to increase yield strength (YS) and ultimate tensile strength (UTS). HIP process enabled γ′ precipitation and recrystallization of grains of the as-printed samples in one single step.

Effects of Heat Treatment on High Temperature Mechanical Property and Corrosion Resistance of Hastelloy X Manufactured by Selective Laser Melting

NANO ◽  
2021 ◽  
Author(s):  
Qingxia Zhang ◽  
Lingtao Meng ◽  
Xiaotian Yin ◽  
Shenghai Wang ◽  
Yong Liu ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Mechanical Property ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Selective Laser Melting ◽  
Fracture Strain ◽  
Laser Melting ◽  
Hastelloy X ◽  
Mechanical Properties And Corrosion ◽  
High Temperature Tensile

In previous studies, the microstructure, mechanical properties and corrosion resistance of Hastelloy X fabricated by selective laser melting (SLM) have been investigated; however, it is hoped that heat treatment will effect on its properties. Therefore, this study is to discuss heat treatment effect on Hastelloy X fabricated by SLM. It is interestingly found that fracture strain greatly increases with heat treatment, and the yield ratio decreases, which demonstrates the material is more reliable. High temperature tensile behavior is discussed; it is worth mentioning that not only fracture strain of the HT sample increases greatly at 550∘C in comparison with SLM sample, but also ultimate tensile strength increases from 632 MPa to 639 MPa; the results show that the mechanical property can be improved at medium and high temperature by heat treatment. The corrosion resistance of HT sample deteriorates slightly, which can be explained by Cr-rich precipitates. In conclusion, the material after heat treatment is suitable for applications requiring high mechanical reliability and medium and high temperature occasions, but it is not befitting for corrosive environments.

scholarly journals Additive Manufacturing of Ti-Based Intermetallic Alloys: A Review and Conceptualization of a Next-Generation Machine

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4317
Author(s):  
Thywill Cephas Dzogbewu ◽  
Willie Bouwer du Preez
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Additive Manufacturing ◽  
Complex Geometries ◽  
Intermetallic Alloys ◽  
Tial Alloys ◽  
Conventional Methods ◽  
Manufacturing Technologies ◽  
In Situ Heat Treatment

TiAl-based intermetallic alloys have come to the fore as the preferred alloys for high-temperature applications. Conventional methods (casting, forging, sheet forming, extrusion, etc.) have been applied to produce TiAl intermetallic alloys. However, the inherent limitations of conventional methods do not permit the production of the TiAl alloys with intricate geometries. Additive manufacturing technologies such as electron beam melting (EBM) and laser powder bed fusion (LPBF), were used to produce TiAl alloys with complex geometries. EBM technology can produce crack-free TiAl components but lacks geometrical accuracy. LPBF technology has great geometrical precision that could be used to produce TiAl alloys with tailored complex geometries, but cannot produce crack-free TiAl components. To satisfy the current industrial requirement of producing crack-free TiAl alloys with tailored geometries, the paper proposes a new heating model for the LPBF manufacturing process. The model could maintain even temperature between the solidified and subsequent layers, reducing temperature gradients (residual stress), which could eliminate crack formation. The new conceptualized model also opens a window for in situ heat treatment of the built samples to obtain the desired TiAl (γ-phase) and Ti3Al (α2-phase) intermetallic phases for high-temperature operations. In situ heat treatment would also improve the homogeneity of the microstructure of LPBF manufactured samples.

Influence of Heat Treatment on Microstructure and Mechanical Properties of Selective Laser Melted TiAl6V4 Alloy

2018 ◽  
Vol 284 ◽  
pp. 615-620 ◽  
Author(s):  
R.M. Baitimerov ◽  
P.A. Lykov ◽  
L.V. Radionova
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Selective Laser Melting ◽  
Room Temperature ◽  
Base Alloy ◽  
Tensile Tests ◽  
Heat Treatments ◽  
Laser Melting ◽  
Microstructure And Mechanical Properties ◽  
Treatment Procedures

TiAl6V4 titanium base alloy is widely used in aerospace and medical industries. Specimens for tensile tests from TiAl6V4 with porosity less than 0.5% was fabricated by selective laser melting (SLM). Specimens were treated using two heat treatment procedures, third batch of specimens was tested in as-fabricated statement after machining. Tensile tests were carried out at room temperature. Microstructure and mechanical properties of SLM fabricated TiAl6V4 after different heat treatments were investigated.

Microstructure and Mechanical Properties of TC4 Titanium Alloy Formed by Selective Laser Melting After Heat Treatment

2017 ◽  
Vol 44 (9) ◽  
pp. 0902001
Author(s):  
肖振楠 Xiao Zhennan ◽  
刘婷婷 Liu Tingting ◽  
廖文和 Liao Wenhe ◽  
张长东 Zhang Changdong ◽  
杨涛 Yang Tao
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Titanium Alloy ◽  
Selective Laser Melting ◽  
Laser Melting ◽  
Tc4 Titanium Alloy ◽  
Microstructure And Mechanical Properties
Sign in / Sign up

Export Citation Format

Share Document