scholarly journals Effect of Cooling Rates on the Microstructure and Mechanical Property of La Modified Al7SiMg Alloys Processed by Gravity Die Casting and Semi-Solid Die Casting

Metals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 549
Author(s):  
Longfei Li ◽  
Daquan Li ◽  
Jian Feng ◽  
Yongzhong Zhang ◽  
Yonglin Kang
Keyword(s):  
Mechanical Properties ◽  
Cooling Rate ◽  
Die Casting ◽  
Casting Process ◽  
Cooling Rates ◽  
Eutectic Si ◽  
Fibrous Morphology ◽  
La Addition ◽  
Semi Solid ◽  
Re Elements

Rare earth (RE) additions are capable of refining the α-Al phase as well as modifying the eutectic Si particles of alloys. The cooling rate in casting process should be carefully concerned when the Al-Si alloys are refined and modified by adding RE elements. In this study, the effect of cooling rates on the microstructure and mechanical properties of La modified Al-7.0Si-0.3Mg alloys was studied in gravity die casting and semi-solid die casting. It is found that in La modified Al-7.0Si-0.3Mg alloys, with increasing the cooling rate from 0.2 to 9 K/s in gravity die casting, the α-Al grains are greatly refined and the Si particles are modified to branching morphology, which evidently increases the UTS and elongation of alloys. In addition, when increasing the cooling rate from 30 to 130 K/s in semi-solid die casting, the α-Al grains are refined from 140 to 47 μm, and the Si particles are modified to fibrous morphology, which increases the UTS from 190 to 230 MPa and elongation from 10% to 11%. However, the 0.4 wt.% La addition results to La-rich phases formed in microstructure, which impairs the mechanical properties of Al-7.0Si-0.3Mg alloys in semi-solid die casting.

Microstructure and Mechanical Properties of Al Alloys by Semi-Solid Processing with LSPSF Technology

2009 ◽  
Vol 628-629 ◽  
pp. 477-482 ◽  
Author(s):  
Hong Min Guo ◽  
Xiang Jie Yang ◽  
J.X. Wang
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloys ◽  
Die Casting ◽  
High Strength ◽  
Casting Process ◽  
Homogeneous Distribution ◽  
Casting Alloy ◽  
Die Casting Process ◽  
Casting Industry ◽  
Semi Solid

Rheoforming is becoming the choice of the casting industry which relies on the semi-solid slurry for high integrity structural parts. The potential of rheoforming with LSPSF (Low superheat pouring with a shear field) for aluminum alloys was investigated in the present work. High quality semi-solid slurries of a series of aluminum alloys were manufactured by LSPSF process, such as casting alloy A356, high strength alloy 201, secondary die casting alloy A380 and wrought alloy 2024, 6082 and 7075, in which the primary α-Al presented spherical, small and homogeneous distribution, especially with zero-entrapped liquid. Applications of LSPSF in high pressure die casting process and squeeze casting process were presented. Results showed that LSPSF rheoforming could improve microstructures and increase mechanical properties.

scholarly journals The Effect of Solidification Rate on the Microstructure and Mechanical Properties of Pure Magnesium

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1264
Author(s):  
Murtatha M. Jamel ◽  
Hugo Lopez ◽  
Benjamin Schultz ◽  
Wilkistar Otieno
Keyword(s):  
Mechanical Properties ◽  
Cooling Rate ◽  
Fracture Behavior ◽  
Solidification Rate ◽  
Casting Process ◽  
Grain Structure ◽  
Rockwell Hardness ◽  
Cooling Rates ◽  
Liquid Co2 ◽  
Processing Defects

Magnesium, Mg, has been widely investigated due to its promising potential as magnesium alloys for various applications, particularly as biomedical implantation devices among other medical applications. This work investigates the influence of different cooling rates on the strength of pure Mg. The cooling rates were set to cover a low cooling rate LCR (0.035 °C/s) in an insulated furnace, a moderate cooling rate MCR (0.074 °C/s) in uninsulated-ends furnace, and a high cooling rate HCR (13.5 °C/s) in liquid CO2. The casting process was accomplished using a closed system of melting and cooling due to the reactivity-flammability of magnesium in order to minimize processing defects and increase the safety factor. The as-cast samples were metallographically examined for their microstructure, and properties such as impact strength, hardness, and tension were determined. Increasing the solidification rate from 0.035 °C/s to 0.074 °C/s increased the hardness from 30 to 34 Rockwell Hardness and the UTS from 48 to 67 MPa. A higher solidification rate of 13.5 °C/s further enhanced the hardness to 48 Rockwell Hardness and the UTS to 87 MPa in comparison to the 0.074 °C/s cooling rate. Additionally, the fracture behavior and morphology were investigated. It was found that in general, the mechanical properties tended to improve by refining the grain structure.

scholarly journals The Influence of Cooling Rate on Microstructure and Mechanical Properties of AlSi9Cu3

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 186
Author(s):  
Matic Žbontar ◽  
Mitja Petrič ◽  
Primož Mrvar
Keyword(s):  
Mechanical Properties ◽  
High Pressure ◽  
Cooling Rate ◽  
Die Casting ◽  
Cooling Rates ◽  
Technological Practice ◽  
Pressure Die Casting ◽  
Compressive Tests ◽  
Solidification Of Metal

The aim of this study was to determine the correlation between the size and the distribution of microstructural constituents and their cooling rate, as well as the correlation between the mechanical properties and the cooling rate of AlSi9Cu3 aluminum alloy when cast in high-pressure die casting (HPDC) conditions. In other words, the ultimate goal of the research was to determine the mechanical properties for a casting at different cooling rates. Castings with different wall thicknesses were chosen, and different cooling rates were assumed for each one. Castings from industrial technological practice were systematically chosen, and probes were extracted from those castings for the characterization of their mechanical properties. Special non-standard cylinders were created on which compressive tests were carried out. The uniqueness of this research lies in the fact that the diameters of the designed cylinders were in direct correlation to the actual wall thickness of the castings. This is important because the solidification of metal in the die cavity is complex, in that the cooling rates are higher on the surface of the casting than in the center. Local in-casting cooling rates were determined using numerical simulations. It was discovered that with increasing cooling rates from 60 K/s to 125 K/s the values for strength at 5% deformation increased on average from 261 MPa to 335 MPa.

Development of Semi-Solid Die Casting Product Design and Die Design Technology for Aluminium Alloy Clamp

2016 ◽  
Vol 256 ◽  
pp. 334-339 ◽  
Author(s):  
Song Chen ◽  
Fan Zhang ◽  
You Feng He ◽  
Da Quan Li ◽  
Qiang Zhu
Keyword(s):  
Product Design ◽  
Die Casting ◽  
Casting Process ◽  
Die Design ◽  
Thick Wall ◽  
Thin Wall ◽  
Gating System ◽  
Cross Sectional ◽  
Die Casting Process ◽  
Semi Solid

Semi-solid slurry has significantly higher viscosity than liquid metal. This character of fluidity makes product design and die design, such as gating system, overflow and venting system, be different between these two die casting processes. In the present paper, taking a clamp product as an example, analyses the product optimization and die design by comparing the experimental and computational numerical simulation results. For the clamp, product structure is designed to be suitable for characters of SSM die casting process. The gating system is designed to be uniform variation of thickness, making the cross-sectional area uniformly reduce from the biscuit to the gate. This design ensures semi-solid metal slurry to fill die cavity from thick wall to thin wall. Gate position is designed at the thickest location, the gate shape of semi-solid die casting is set to be much bigger than traditional liquid casting. A good filling behaviour can be achieved by aforementioned all these design principles and it will be helpful to the intensification of pressure feeding after filling.

Microstructure and Mechanical Properties of Mg-6Zn-1.4Y Alloy Produced by Rheo-Squeeze Casting Process

2016 ◽  
Vol 879 ◽  
pp. 530-535
Author(s):  
Xiao Gang Fang ◽  
Shu Sen Wu ◽  
Shu Lin Lü
Keyword(s):  
Mechanical Properties ◽  
Power Density ◽  
Squeeze Casting ◽  
Casting Process ◽  
Acoustic Power ◽  
Icosahedral Quasicrystal ◽  
Microstructure And Mechanical Properties ◽  
Average Grain Size ◽  
Grain Size And Shape ◽  
Semi Solid

Mg-Zn-Y alloys containing a thermally stable icosahedral quasicrystal phase (I-phase) will have wide application future on condition that primary α-Mg dendrite and the I-phase can be refined during the casting process. In this research, the microstructure and mechanical properties of the rheo-squeeze casting (RSC) Mg-6Zn-1.4Y alloys have been investigated. The Mg alloy melt was exposed to ultrasonic vibration (USV) with different acoustic power densities from 0 W/mL to 9 W/mL, and then the slurry was formed by squeeze casting. The results show that good semi-solid slurry with fine and spherical α-Mg particles could be obtained with the acoustic power density of 6 W/mL, and the average grain size and shape factor of primary α-Mg were 32 μm and 0.76, respectively. Meanwhile the coarse eutectic I-phase (Mg3Zn6Y) was refined obviously and dispersed uniformly. Compared with the samples without USV, the tensile strength and elongation of the RSC casting samples with 6 W/mL acoustic power density were elevated by 10.6% and 55.5%, respectively.

Microstructure Evolution and Mechanical Properties of Rheoformed YL112 Aluminum Alloy

2008 ◽  
Vol 141-143 ◽  
pp. 163-168 ◽  
Author(s):  
Xiang Jie Yang ◽  
Hong Min Guo
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Shape Factor ◽  
Die Casting ◽  
Equivalent Diameter ◽  
Uniform Microstructure ◽  
Casting Aluminum Alloy ◽  
Casting Aluminum ◽  
Semi Solid ◽  
Secondary Solidification

Rheo-die casting (RDC) based on LSPSF (low superheat pouring with a shear field) rheocasting process has been exploited. In case of secondary die casting aluminum alloy YL112, LSPSF allowed for preparation of sound semi-solid slurry in 15-20s that fully meet the production rate of HPDC, the primary α-Al exhibiting a mean equivalent diameter of 70 μm and shape factor of 0.93, without any entrapped eutectic. Compared to conventional HPDC, RDC improves microstructures in castings. Secondary solidification of semi-solid slurry takes place uniformly throughout the entire cavity, producing an extremely fine and uniform microstructure. The experimental results show the RDC 380 alloy has much improved integrity and mechanical properties, particularly elongation, and heat treatment can be used to enhance the mechanical properties.

Study on Local Extrusions' Effects on Improvement of Die Casting Prismatic Parts' Forming Quality

2013 ◽  
Vol 312 ◽  
pp. 475-479
Author(s):  
Wei Gang Zheng ◽  
Cun Hong Yin ◽  
Yu Hong Yuan ◽  
Zhen Min Pan ◽  
Chao Tang
Keyword(s):  
Mechanical Properties ◽  
Die Casting ◽  
Casting Process ◽  
Extrusion Process ◽  
Shrinkage Porosity ◽  
Shrinkage Cavity ◽  
Prismatic Parts ◽  
Porosity Defects ◽  
Die Casting Process ◽  
Casting Production

This paper analyzes traditional die casting process to find out the reasons that cause shrinkage cavity and porosity defects in casting. An optimized process of die casting by using local extrusion is proposed. A device used in local extrusion which realizes forcing compensating contraction on key parts of crankcase is designed and the parameters of local extrusion process are discussed. Compared the mechanical properties and microstructure of local extrusion used in die casting production with traditional. It shows that local extrusion used in die casting production can not only achieve the aim eliminating shrinkage porosity and cavity of a casting but also can refine grain to improve the mechanical properties.

Die Design for Main Bearing Cap of Engine Block Based Semi-Solid Die Casting Process and the Comparison Analysis with Squeeze Casting Process

2019 ◽  
Vol 285 ◽  
pp. 429-435 ◽  
Author(s):  
Song Chen ◽  
Da Quan Li ◽  
Fan Zhang ◽  
Min Luo ◽  
Xiao Kang Liang ◽  
...  
Keyword(s):  
Squeeze Casting ◽  
Die Casting ◽  
Dendritic Structure ◽  
Casting Process ◽  
Die Design ◽  
Main Bearing ◽  
Block Based ◽  
Semi Solid ◽  
Bearing Cap ◽  
Squeeze Casting Process

There are two new processes to development automobile structural components which have certain thickness. In the present paper, taking a main bearing cap product as an example, analyses die design by comparing the experimental and computational numerical simulation results. For the main bearing cap, product structure and mold design were designed to be suitable for characters of SSM die casting and squeeze process. Semi-solid slurry has significantly higher viscosity than liquid metal. This character of fluidity and solid fraction phase make the flow condition more laminar than liquid squeeze casting with the partial fill experiment. And compared with squeeze casting process, the globular shape grain size is smaller than dendritic structure. And mechanical property result shows that the elongation of SSM die casting can achieve more than twice than squeeze casting.

Sign in / Sign up

Export Citation Format

Share Document