scholarly journals Silicon Steel Strip Profile Control Technology for Six-High Cold Rolling Mill with Small Work Roll Radius

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 401
Author(s):  
Hainan He ◽  
Jian Shao ◽  
Xiaochen Wang ◽  
Quan Yang ◽  
Xiawei Feng
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Steel Strip ◽  
Work Roll ◽  
Rolling Process ◽  
Silicon Steel ◽  
Cold Rolling Mill ◽  
Strip Profile ◽  
Profile Control ◽  
Small Work

Due to the requirement of magnetic properties of silicon steel sheets, producing high-precision size strips is the main aim of the cold rolling industry. The tapered work roll shifting technique of the six-high cold rolling mill is effective in reducing the difference in transverse thickness of the strip edge, but the effective area is limited, especially for a high crown strip after the hot rolling process. The six-high mill with a small work roll size can produce a strip with higher strength and lower thickness under a smaller rolling load. At the same time, the profile of the strip can be substantially improved. By advancing a well-established analytical method, a series of simulation analyses are conducted to reveal the effectiveness of a small work roll radius for the strip profile in the six-high cold rolling process. Through the analysis of flattening deformation and deflection deformation on the load, the change rule of the strip profile produced by the work roll with a small roll diameter can be obtained. Combined with theoretical analysis and industrial experiments, it can be found that the improvement effect of the small work roll radius on the profile of the silicon strip is as significant.

scholarly journals Thin Strip Profile Control Capability of Roll Crossing and Shifting in Cold Rolling Mill

2013 ◽  
Vol 773-774 ◽  
pp. 70-78 ◽  
Author(s):  
Abdulrahman Aljabri ◽  
Zheng Yi Jiang ◽  
Dong Bin Wei ◽  
Xiao Dong Wang ◽  
Hasan Tibar
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Rolling Force ◽  
Work Roll ◽  
Rolling Process ◽  
Thin Strip ◽  
Strip Rolling ◽  
Strip Shape ◽  
Strip Profile ◽  
Profile Control

Controlling cold strip profile is a difficult and significant problem has been found in industry during thin strip rolling. At present choosing the new type of strip rolling mill is the one of main methods to control the strip shape quality in cold rolling. The influences of rolling process parameters such as the work roll cross angle and work roll shifting on the strip shape and profile of thin strip are recognised throughout this study. The results show that the roll crossing and shifting is efficient way to control the strip shape. The increase of the work roll crossing angle would lead to improve the strip profile significantly by decreasing the exit strip crown and edge drop. The strip profile would be enhanced if the axial roll shifting was increased. Moreover, the total rolling force was analysed in detail by changing the roll cross angle and axial shifting roll.

scholarly journals Investigation and Optimization of Load Distribution for Tandem Cold Steel Strip Rolling Process

Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 677 ◽  
Author(s):  
Xin Jin ◽  
Changsheng Li ◽  
Yu Wang ◽  
Xiaogang Li ◽  
Yongguang Xiang ◽  
...  
Keyword(s):  
Genetic Algorithm ◽  
Cold Rolling ◽  
Prediction Model ◽  
Load Distribution ◽  
Rolling Mill ◽  
Fitness Function ◽  
Steel Strip ◽  
Rolling Process ◽  
Cold Rolling Mill ◽  
Tandem Cold Rolling

In order to improve the cold rolled steel strip flatness, the load distribution of the tandem cold rolling process is subject to investigation and optimization. The strip deformation resistance model is corrected by an artificial neural network that is trained with the actual measured data of 4500 strip coils. Based on the model, a flatness prediction model of strip steel is established in a five-stand tandem cold rolling mill, and the precision of the flatness prediction model is verified by rolling experiment data. To analyze the effect of load distribution on flatness, the flatness of stand 4 is calculated to be 7.4 IU, 10.6 IU, and 16.8 IU under three typical load distribution modes. A genetic algorithm based on the excellent flatness is proposed to optimize the load distribution further. In the genetic algorithm, the classification of flatness of stand 4 calculated by the developed flatness prediction model is taken as the fitness function, with the optimal reduction of 28.6%, 34.6%, 27.3%, and 18.6% proposed for stands 1, 2, 3, and 4, respectively. The optimal solution is applied to a 1740 mm tandem cold rolling mill, which reduce the flatness classification from 10.8 IU to 3.2 IU for a 1-mm thick steel strip.

scholarly journals Analysis of Thin Strip Profile during Asymmetrical Cold Rolling with Roll Crossing and Shifting Mill

2014 ◽  
Vol 894 ◽  
pp. 212-216 ◽  
Author(s):  
Abdulrahman Aljabri ◽  
Zheng Yi Jiang ◽  
Dong Bin Wei
Keyword(s):  
Cold Rolling ◽  
Shape Control ◽  
Work Roll ◽  
Rolling Process ◽  
Thin Strip ◽  
Asymmetrical Rolling ◽  
Strip Shape ◽  
Strip Profile ◽  
Profile Control ◽  
The One

Strip profile control during rolling is required to assure the dimensional quality of rolled thin strip is acceptable for customers. Throughout rolling, the strip profile is controlled by using the advanced shape control rolling mill, such as the combination of work roll crossing and shifting during asymmetrical rolling, the one of the valuable methods to control the strip profile quality in rolling process. In this paper, the influences of cold rolling parameters such as the crossing angle and axial shifting value of work rolls on the strip profile are analysed. The strip shape control is discussed under both symmetrical and asymmetrical rolling conditions. The obtained results are appropriate to control the rolled thin strip profile in practice.

FEM Analysis of Profile Control Capability during Rolling in a 6-High CVC Cold Rolling Mill

2014 ◽  
Vol 988 ◽  
pp. 257-262 ◽  
Author(s):  
Ke Zhi Linghu ◽  
Zheng Yi Jiang ◽  
Fei Li ◽  
Jing Wei Zhao ◽  
Meng Yu ◽  
...  
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Rolling Force ◽  
Fem Analysis ◽  
Continuous Variable ◽  
Cold Rolling Mill ◽  
Strip Rolling ◽  
Roll Bending ◽  
Profile Control ◽  
Control Capability

A 3D elastic-plastic finite element method (FEM) model of cold strip rolling for 6-high continuous variable crown (CVC) rolling mill was developed. The rolling force distributions were obtained by the internal iteration processes. The calculated error has been significantly reduced by the developed model. the absolute error between the simulated results and the actual values is obtained to be less than 10μm, and relative error is less than 1%. The developed model is significant in investigating the profile control capability of the CVC cold rolling mill in terms of work roll bending, intermediate roll bending and intermediate roll shifting.

Thickness Indirect Measurement Method for Direct Pulling Pilot Cold Rolling Mill

2011 ◽  
Vol 189-193 ◽  
pp. 2670-2674
Author(s):  
Zhi Jie Jiao ◽  
Chun Yu He ◽  
Jian Ping Li ◽  
Xiang Hua Liu
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Measurement Method ◽  
Rolling Process ◽  
Indirect Measurement ◽  
Cold Rolling Mill ◽  
Movement Data ◽  
Program Flow ◽  
New Type ◽  
Exit Speed

Pilot cold rolling mill is the important tool for the cold rolling process researching and new steel grade development. According to the design of the new type direct pulling pilot cold rolling mill, based on the mass flow constant principle, strip exit thickness indirect measurement method is studied. During rolling, strip entry and exit speed can be calculated accurately according to the measured value of two sides’ clamps movement. Data filtering treatment is adopted and program flow chart is designed. Based on the material entry thickness measured manually, exit thickness of all passes can be measured indirectly. This thickness indirect measurement method has been applied successfully on the new type pilot cold rolling mill, and the measurement results show that this method has a good accuracy.

More from the Mill

2000 ◽  
Vol 122 (10) ◽  
pp. 82-87
Author(s):  
Michael Valenti
Keyword(s):  
Cold Rolling ◽  
Control Systems ◽  
Rolling Mill ◽  
Space Shuttle ◽  
State Of The Art ◽  
Steel Strip ◽  
Cold Rolling Mill ◽  
Automated Control ◽  
The World

This article focuses on the launch of Sputnik that transfixed the world by Carpenter Technology Corp. By incorporating advanced processing equipment, including a rolling mill, shape controller, annealing furnaces, wet grinders, and leveler with state-of-the-art automated control systems, Carpenter has improved the productivity and quality of its high value strip at a time when Space Shuttle launchings are taken in stride. The Carpenter specialty strip facility installed a cold rolling mill designed by Joseph Frohling GmbH of Olpe, Germany, in November last year, to increase rolling capacity and guarantee that the steel strip it produces meets the desired shape and thickness. In the Frohling mill, strip passes between two working rolls that reduce its thickness to sizes between 0.150 and 0.008 inch, at speeds up to 1500 feet per minute. Carpenter also installed three Ebner vertical annealing furnaces. Coiled strip on mandrels is unwound through each furnace, annealed, then rewound continuously to promote productivity.

Research on work roll thermal crown in cold rolling mill

2013 ◽  
Author(s):  
Lei Song ◽  
Mingang Shen ◽  
Xuebo Chen ◽  
Junsheng Wang
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Work Roll ◽  
Cold Rolling Mill ◽  
Thermal Crown

Ribbon Fatigue Spalling of a Forged Work Roll Used at a Cold Rolling Mill

2014 ◽  
Vol 14 (6) ◽  
pp. 707-714 ◽  
Author(s):  
Soma Ghosh ◽  
Pankhuri Sinha ◽  
Shivanandan Indimath ◽  
Goutam Mukhopadhyay ◽  
Sandip Bhattacharya
Keyword(s):  
Cold Rolling ◽  
Rolling Mill ◽  
Work Roll ◽  
Cold Rolling Mill
Sign in / Sign up

Export Citation Format

Share Document