scholarly journals Fracture of Titanium Alloys at High Strain Rates and under Stress Triaxiality

Metals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 305 ◽  
Author(s):  
Vladimir V. Skripnyak ◽  
Evgeniya G. Skripnyak ◽  
Vladimir A. Skripnyak
Keyword(s):  
Titanium Alloys ◽  
High Speed ◽  
Stress Triaxiality ◽  
Correlation Method ◽  
Image Correlation ◽  
Shear Stresses ◽  
Test Machine ◽  
Strain Rates ◽  
Hydraulic Test ◽  
Strain Fields

The present study investigates the effect of stress triaxiality on mechanical behavior and fracture of Ti-5Al-2.5Sn alloy in a practical relevant strain rate range from 0.1 to 1000 s−1. Tensile tests were carried out on flat smoothed and notched specimens using an Instron VHS 40/50-20 servo-hydraulic test machine. High-speed video registration was conducted by Phantom 711 Camera. Strain fields on the specimen gauge area were investigated by the digital image correlation method (DIC). The fracture surface relief was studied using digital microscope Keyence VHX-600D. Stress and strain fields during testing of the Ti-5Al-2.5Sn alloy were analyzed by the numerical simulation method. The evolution of strain fields at the investigated loading condition indicates that large plastic deformation occurs in localization bands. The alloy undergoes fracture governing by damage nucleation, growth, and coalescence in the localized plastic strain bands oriented along the maximum shear stresses. Results confirm that the fracture of near alpha titanium alloys has ductile behavior at strain rates from 0.1 to 1000 s−1, stress triaxiality parameter 0.33 < η < 0.6, and temperature close to 295 K.

Approaches to Synchronise Conventional Measurements with Optical Techniques at High Strain Rates

2011 ◽  
Vol 70 ◽  
pp. 75-80 ◽  
Author(s):  
Duncan A. Crump ◽  
Janice M. Dulieu-Barton ◽  
Marco L. Longana
Keyword(s):  
Polymer Composites ◽  
High Speed ◽  
High Strain ◽  
Image Correlation ◽  
Test Machine ◽  
Strain Rates ◽  
High Strain Rates ◽  
Optical Techniques ◽  
Specific Loading ◽  
Military Applications

Polymer composites are increasingly being used in high-end and military applications, mainly due to their excellent tailorability to specific loading scenarios and strength/stiffness to weight ratios. The overall purpose of the research project is to develop an enhanced understanding of the behaviour of fibre reinforced polymer composites when subjected to high velocity loading. This is particularly important in military applications, where composite structures are at a high risk of receiving high strain rate loading, such as those resulting from collisions or blasts. The work described here considers an approach that allows the collection of full-field temperature and strain data to investigate the complex viscoelastic behaviour of composite material at high strain rates. To develop such a data-rich approach digital image correlation (DIC) is used to collect the displacement data and infra-red thermography (IRT) is used to collect temperature data. The use of optical techniques at the sampling rates necessary to capture the behaviour of composites subjected to high loading rates is novel and requires using imaging systems at the far extent of their design specification. One of the major advantages of optical techniques is that they are non-contact; however this also forms one of the challenges to their application to high speed testing. The separate camera systems and the test machine/loading system must be synchronised to ensure that the correct strain/temperature measurement is correlated with the correct temporal value of the loading regime. The loading rate exacerbates the situation where even at high sampling rates the data is discrete and therefore it is difficult to match values. The work described in the paper concentrates on investigating the possibility of the high speed DIC and synchronisation. The limitations of bringing together the techniques are discussed in detail, and a discussion of the relative merits of each synchronisation approach is included, which takes into consideration ease of use, accuracy, repeatability etc.

scholarly journals Study of Rock Blasting Failure Pattern with One Free Boundary

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Jun Yang ◽  
Xin Liu ◽  
Zhenyang Xu ◽  
Hongliang Tang ◽  
Qi Yu
Keyword(s):  
Free Boundary ◽  
Strain Localization ◽  
High Speed ◽  
Correlation Method ◽  
Failure Pattern ◽  
Image Correlation ◽  
High Speed Photography ◽  
Rock Blasting ◽  
Strain Fields ◽  
Von Mises

The study of rock blasting failure pattern is of engineering importance. In order to investigate rock blasting failure pattern with one free boundary, high-speed photography technology is introduced into the two-dimensional granite model. Through high-speed camera images, a crack that originated from spalling is observed and then propagates inward. By using the high-speed digital image correlation method, the full-strain fields on the surface of the specimens are calculated. The preliminary results show that von Mises strain localization appears on the specimen surface near the free boundary. The axial strains near that crack present three kinds of characteristics. There are the joint action areas of the strain localization by analyzing strains in different directions, and the strain localizations are related to the crack propagation. Ultimately, after analysis of the experimental results, the preliminary diagrammatic drawing of rock blasting failure pattern under stress wave action with one free boundary is drawn.

High-speed digital-image correlation method

2009 ◽  
Vol 34 (13) ◽  
pp. 1955 ◽  
Author(s):  
Min Wang ◽  
Hao Wang ◽  
Yuwan Cen
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
High Speed ◽  
Correlation Method ◽  
Image Correlation ◽  
Digital Image Correlation Method

scholarly journals Strain rate and thermal softening effects in shear testing of AA7075-T6 sheet

2018 ◽  
Vol 183 ◽  
pp. 02037 ◽  
Author(s):  
Taamjeed Rahmaan ◽  
Ping Zhou ◽  
Cliff Butcher ◽  
Michael J. Worswick
Keyword(s):  
Strain Rate ◽  
High Speed ◽  
Rate Sensitivity ◽  
Thermal Conditions ◽  
Shear Loading ◽  
Image Correlation ◽  
High Rate ◽  
Strain Rates ◽  
Shear Testing ◽  
Plane Shear

Shear tests were performed at strain rates ranging from quasi-static (0.01 s-1) to 500 s-1 for AA7075-T6 sheet metal alloy at room temperature. A miniature sized shear specimen was used in this work to perform high strain rate shear testing. Digital image correlation (DIC) techniques were employed to measure the strains in the experiments. At maximum in-plane shear strains greater than 20%, the AA7075-T6 alloy demonstrated a reduced work hardening rate at elevated strain rates. At lower strains, the AA7075-T6 alloy showed mild positive rate sensitivity. The strain to localization (using the Zener-Holloman criterion), measured using the DIC technique, decreased with strain rate in shear loading. The strain at complete failure, however, exhibited an increase at the highest strain rate (500 s-1). The current work also focused on characterization of the thermal conditions occurring during high rate loading in shear with in situ high speed thermal imaging. Experimental results from the highest strain rate (500 s-1) tests showed a notable increase in temperature within the specimen gauge region as a result of the conversion of plastic deformation energy into heat.

Investigating the Flexural Behaviour of Foams at High Strain Rate Using Optical Measurement Techniques

2013 ◽  
Vol 569-570 ◽  
pp. 799-804
Author(s):  
Duncan A. Crump ◽  
Janice M. Dulieu-Barton
Keyword(s):  
High Speed ◽  
Optical Measurement ◽  
Measurement Techniques ◽  
Maximum Load ◽  
Image Correlation ◽  
Test Machine ◽  
Full Field ◽  
Closed Cell ◽  
Load To Failure ◽  
Point Bend

Polymer closed cell foam beam specimens manufactured from H100 Divinycell (Diab) are tested in four point bend at three loading speeds using a specially designed rig and an Instron VHS test machine. Synchronised high speed images are captured using white light and infra-red thermography (IRT) to obtain the mid-point full-field deflection and strains using digital image correlation (DIC) along with the temperature evolutions. There is a marked increase in the maximum load to failure with loading rate and the optical techniques provide an opportunity to analyse the strain and temperature evolution within the specimens.

Experimental Studies of the Behaviour at High Strain Rates of Unfilled and Filled Polypropylenes

2006 ◽  
Vol 3-4 ◽  
pp. 363-368 ◽  
Author(s):  
N. Temimi ◽  
Noelle Billon
Keyword(s):  
Strain Rate ◽  
High Speed ◽  
High Strain ◽  
Experimental Studies ◽  
Young Modulus ◽  
Video Camera ◽  
Image Correlation ◽  
Strain Rates ◽  
High Strain Rates ◽  
Low Velocity

Thermo mechanical behaviour of unfilled and filled polypropylenes are studied in tension from 10-4 to 102 s-1. Complementary low velocity compression and shear tests are also performed. A high-speed video camera (up to 2500 frames/s) combined with image analysis, image correlation and an infra red pyrometer allow measuring 3D-strain fields and temperature during tests. Thus, data can be processed without restrictive assumptions. Beside usual (for polymers) temperature and strain rate sensitivities it is found that plastic deformation in these materials does not obey incompressibility assumption. Voiding damage is evidenced in the polymer matrix by SEM observations that result in volume change and significant decrease in Young modulus for both materials. Moreover, an increase in the temperature of more than 10 °C is observed and is likely to modify the behaviour of each material at high strain rates. Shear and compression measurements demonstrate that yield criteria and constitutive equation depend on loading. It is concluded that apparent yield stress in semi-crystalline polypropylene can be a result of a combination of “non strain rate sensitive” “non-cohesive mechanisms” and “strain rate sensitive” “cohesive mechanisms”. Experimental characterisation on polymers should then be revisited as most of the usual assumptions are invalid and non monotonic tests should be generalized.

Sign in / Sign up

Export Citation Format

Share Document