scholarly journals Texture and Lattice Strain Evolution during Tensile Loading of Mg–Zn Alloys Measured by Synchrotron Diffraction

Metals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 124
Author(s):  
Xiaohua Zhou ◽  
Changwan Ha ◽  
Sangbong Yi ◽  
Jan Bohlen ◽  
Norbert Schell ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
Basal Slip ◽  
Lattice Strain ◽  
Tensile Loading ◽  
Tensile Tests ◽  
Vital Role ◽  
Prismatic Slip ◽  
Synchrotron Diffraction ◽  
Strain Evolution ◽  
Zn Alloys

To explore the effect of neodymium (Nd) on the deformation mechanisms of Mg–Zn alloys, texture and lattice strain developments of hot-rolled Mg–Zn (Z1) and Mg–Zn–Nd (ZN10) alloys were investigated using in situ synchrotron diffraction and compared with elasto-viscoplastic self-consistent simulation under tensile loading. The Nd-containing ZN10 alloys show much weaker texture after hot rolling than the Nd-free Z1 alloy. To investigate the influence of the initial texture on the texture and lattice strain evolution, the tensile tests were carried out in the rolling and transverse direction. During tension, the {002}<100> texture components develop fast in Z1, which was not seen for ZN10. On the other hand, <100> fiber // loading direction (LD) developed in both alloys, although it was faster in ZN10 than in Z1. Lattice strain investigation showed that <101> // LD-oriented grains experienced plastic deformation first during tension, which can be related to basal slip activity. This was more apparent for ZN10 than for Z1. The simulation results show that the prismatic slip plays a vital role in the plastic deformation of Z1 directly from the beginning. In contrast, ZN10 plastic deformation starts with dominant basal slip but during deformation prismatic slip becomes increasingly important.

scholarly journals Lattice strain evolution during uniaxial tensile loading of stainless steel

1999 ◽  
Vol 259 (1) ◽  
pp. 17-24 ◽  
Author(s):  
Bjørn Clausen ◽  
Torben Lorentzen ◽  
Mark A.M. Bourke ◽  
Mark R. Daymond
Keyword(s):  
Stainless Steel ◽  
Lattice Strain ◽  
Tensile Loading ◽  
Uniaxial Tensile ◽  
Strain Evolution ◽  
Uniaxial Tensile Loading

Neutron diffraction studies on lattice strain evolution around a crack-tip during tensile loading and unloading cycles

2005 ◽  
Vol 53 (8) ◽  
pp. 971-975 ◽  
Author(s):  
Yinan Sun ◽  
Hahn Choo ◽  
Peter K. Liaw ◽  
Yulin Lu ◽  
Bing Yang ◽  
...  
Keyword(s):  
Neutron Diffraction ◽  
Lattice Strain ◽  
Crack Tip ◽  
Tensile Loading ◽  
Strain Evolution ◽  
Loading And Unloading

Sem Examinations of Glass Knives

1970 ◽  
Vol 28 ◽  
pp. 282-283
Author(s):  
J. Temple Black
Keyword(s):  
Plastic Deformation ◽  
Tensile Loading ◽  
Resultant Force ◽  
Stress Concentrations ◽  
Edge Chipping ◽  
Surface Flaws ◽  
Edge Defects ◽  
Microscopic Surface

There are two types of edge defects common to glass knives as typically prepared for microtomy purposes: 1) striations and 2) edge chipping. The former is a function of the free breaking process while edge chipping results from usage or bumping of the edge. Because glass has no well defined planes in its structure, it should be highly resistant to plastic deformation of any sort, including tensile loading. In practice, prevention of microscopic surface flaws is impossible. The surface flaws produce stress concentrations so that tensile strengths in glass are typically 10-20 kpsi and vary only slightly with composition. If glass can be kept in compression, wherein failure is literally unknown (1), it will remain intact for long periods of time. Forces acting on the tool in microtomy produce a resultant force that acts to keep the edge in compression.

Dislocations in alumina deformed by prismatic slip

1978 ◽  
Vol 36 (1) ◽  
pp. 606-607
Author(s):  
J. Cadoz ◽  
J. Castaing ◽  
J. Philibert
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Basal Slip ◽  
Prismatic Slip ◽  
Compression Tests ◽  
Thin Sections ◽  
Burgers Vector ◽  
Maximum Deformation ◽  
Transmission Electron ◽  
Mechanical Thinning

Plastic deformation of alumina has been much studied; basal slip occurs and dislocation structures have been investigated by transmission electron microscopy (T.E.M.) (1). Non basal slip has been observed (2); the prismatic glide system <1010> {1210} has been obtained by compression tests between 1400°C and 1800°C (3). Dislocations with <0110> burgers vector were identified using a 100 kV microscope(4).We describe the dislocation structures after prismatic slip, using high voltage T.E.M. which gives much information.Compression tests were performed at constant strainrate (∿10-4s-1); the maximum deformation reached was 0.03. Thin sections were cut from specimens deformed at 1450°C, either parallel to the glide plane or perpendicular to the glide direction. After mechanical thinning, foils were produced by ion bombardment. Details on experimental techniques can be obtained through reference (3).

{10-12} Twinning Mechanism During In Situ Micro-Tensile Loading of Pure Mg: Role of Basal Slip and Twin-Twin Boundary Interaction

2020 ◽  
Author(s):  
Nicolò Maria della Ventura ◽  
Szilvia Kalácska ◽  
Daniele Casari ◽  
Thomas Edward James Edwards ◽  
Johann Michler ◽  
...  
Keyword(s):  
Twin Boundary ◽  
Basal Slip ◽  
Tensile Loading ◽  
Boundary Interaction

Progressive damage characteristics of screwed single-lap CFRPI-metal joint subjected to tensile loading at RT and 350°C

2021 ◽  
pp. 002199832098559
Author(s):  
Yun-Tao Zhu ◽  
Jun-Jiang Xiong ◽  
Chu-Yang Luo ◽  
Yi-Sen Du
Keyword(s):  
Damage Model ◽  
Tensile Loading ◽  
Tensile Tests ◽  
Displacement Curve ◽  
Progressive Damage ◽  
Damage Characteristics ◽  
Metal Joint ◽  
Static Tensile ◽  
Strength And Stiffness ◽  
Progressive Damage Model

This paper outlines progressive damage characteristics of screwed single-lap CFRPI-metal joints subjected to tensile loading at RT (room temperature) and 350°C. Quasi-static tensile tests were performed on screwed single-lap CCF300/AC721-30CrMnSiA joint at RT and 350°C, and the load versus displacement curve, strength and stiffness of joint were gauged and discussed. With due consideration of thermal-mechanical interaction and complex failure mechanism, a modified progressive damage model (PDM) based on the mixed failure criterion was devised to simulate progressive damage characteristics of screwed single-lap CCF300/AC721-30CrMnSiA joint, and simulations correlate well with experiments. By using the PDM, the effects of geometry dimensions on mechanical characteristics of screwed single-lap CCF300/AC721-30CrMnSiA joint were analyzed and discussed.

scholarly journals Influence of Hydrostatic Extrusion on the Mechanical Properties of the Model Al-Mg Alloys

2021 ◽  
Author(s):  
Aleksandra Towarek ◽  
Wojciech Jurczak ◽  
Joanna Zdunek ◽  
Mariusz Kulczyk ◽  
Jarosław Mizera
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Tensile Strength ◽  
Microstructural Analysis ◽  
Tensile Tests ◽  
Hydrostatic Extrusion ◽  
Microstructure Formation ◽  
Initial State ◽  
Degree Of Deformation ◽  
Al Mg Alloys

AbstractTwo model aluminium-magnesium alloys, containing 3 and 7.5 wt.% of Mg, were subjected to plastic deformation by means of hydrostatic extrusion (HE). Two degrees of deformation were imposed by two subsequent reductions of the diameter. Microstructural analysis and tensile tests of the materials in the initial state and after deformation were performed. For both materials, HE extrusion resulted in the deformation of the microstructure—formation of the un-equilibrium grain boundaries and partition of the grains. What is more, HE resulted in a significant increase of tensile strength and decrease of the elongation, mostly after the first degree of deformation.

Influence of Severe Plastic Deformation on the PLC Effect and Mechanical Properties in Al 5XXX Alloy

2006 ◽  
Vol 114 ◽  
pp. 171-176 ◽  
Author(s):  
Joanna Zdunek ◽  
Pawel Widlicki ◽  
Halina Garbacz ◽  
Jaroslaw Mizera ◽  
Krzysztof Jan Kurzydlowski
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Grain Size ◽  
Severe Plastic Deformation ◽  
True Strain ◽  
Tensile Tests ◽  
Size Reduction ◽  
Hydrostatic Extrusion ◽  
Stress Strain ◽  
Chatelier Effect

In this work, Al-Mg-Mn-Si alloy (5483) in the as-received and severe plastically deformed states was used. Plastic deformation was carried out by hydrostatic extrusion, and three different true strain values were applied 1.4, 2.8 and 3.8. All specimens were subjected to tensile tests and microhardness measurements. The investigated material revealed an instability during plastic deformation in the form of serration on the stress-strain curves, the so called Portevin-Le Chatelier effect It was shown that grain size reduction effected the character of the instability.

Sign in / Sign up

Export Citation Format

Share Document