scholarly journals An Approach for Modelling Slag Infiltration and Heat Transfer in Continuous Casting Mold for High Mn–High Al Steel

Metals ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 51 ◽  
Author(s):  
Jie Yang ◽  
Dengfu Chen ◽  
Mujun Long ◽  
Huamei Duan
Keyword(s):  
Heat Transfer ◽  
Continuous Casting ◽  
Steel Slag ◽  
Casting Process ◽  
Al2o3 Content ◽  
Continuous Casting Mold ◽  
Casting Mold ◽  
Formation And Evolution ◽  
Meniscus Region ◽  
Complex Phenomena

To clarify the characteristics of slag infiltration and heat transfer behaviors in the meniscus region during the casting of high Mn–high Al steel, a mathematical model of a continuous casting mold that couples fluid flow with heat transfer, and solidification is developed. The model is based on the change in slag composition and properties caused by the steel/slag reaction. The formation and evolution of the meniscus profile and slag films for different mold fluxes during mold oscillation are described. The results show that the rapid growth of the slag rim with a high Al2O3 content approaches and deforms the meniscus so that a series of casting problems such as slag infiltration blocking, large fluctuations in heat flux, and even meniscus breaking occur in the continuous casting process. Predictions are in good agreement with plant measurements. These findings provide an improved understanding of the complex phenomena occurring in the meniscus region and give new insights into the evaluation and optimization of mold flux properties for high Mn–high Al steel casting.

scholarly journals Numerical Simulation of Fluid Flow, Heat Transfer, Species Transfer, and Solidification in Billet Continuous Casting Mold with M-EMS

Metals ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 66 ◽  
Author(s):  
Wenjie Zhang ◽  
Sen Luo ◽  
Yao Chen ◽  
Weiling Wang ◽  
Miaoyong Zhu
Keyword(s):  
Fluid Flow ◽  
Continuous Casting ◽  
Swirling Flow ◽  
Casting Process ◽  
Longitudinal Section ◽  
Current Intensity ◽  
Continuous Casting Mold ◽  
Casting Mold ◽  
Billet Continuous Casting ◽  
Negative Segregation

Electromagnetic stirring in mold (M-EMS) has been widely used in continuous casting process to improve the solidification quality of the steel strand. In the present study, a 3D multi-physical-field mathematical model was developed to predict the macro transport phenomena in continuous casting mold with M-EMS using ANSYS commercial software, and was adopted to investigate the effect of current intensity (0, 150, 200, and 240 A) on the heat, momentum, and species transports in the billet continuous casting mold with a size of 160 mm × 160 mm. The results show that when the M-EMS is on, the horizontal swirling flow appears and shifts the high-temperature zone upward. With the increase of current intensity, two swirling flows form on the longitudinal section of continuous casting mold and become more intensive, and the flow velocity of the molten steel at the solidification front increases. Thus, the wash effects of the fluid flow on the initial solidified shell become intensive, resulting in a thinner shell thickness at the mold exit and a significant negative segregation of carbon at the billet subsurface.

scholarly journals On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

Metals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 1375
Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
Yong Tang ◽  
...  
Keyword(s):  
Continuous Casting ◽  
Steel Slag ◽  
Phase Interface ◽  
Steel Production ◽  
Submerged Entry Nozzle ◽  
Casting Process ◽  
Material Model ◽  
Slag Layer ◽  
Continuous Casting Mold ◽  
High Production Rate

Continuous casting (CC) is one of the most important processes of steel production; it features a high production rate and close to the net shape. The quality improvement of final CC products is an important goal of scientific research. One of the defining issues of this goal is the stability of the casting process. The clogging of submerged entry nozzles (SENs) typically results in asymmetric mold flow, uneven solidification, meniscus fluctuations, and possible slag entrapment. Analyses of retained SENs have evidenced the solidification of entrapped melt inside clog material. The experimental study of these phenomena has significant difficulties that make numerical simulation a perfect investigation tool. In the present study, verified 2D simulations were performed with an advanced multi-material model based on a newly presented single mesh approach for the liquid and solid regions. Implemented as an in-house code using the OpenFOAM finite volume method libraries, it aggregated the liquid melt flow, solidification of the steel, and heat transfer through the refractory SENs, copper mold plates, and the slag layer, including its convection. The introduced novel technique dynamically couples the momentum at the steel/slag interface without complex multi-phase interface tracking. The following scenarios were studied: (i) SEN with proper fiber insulation, (ii) partial damage of SEN insulation, and (iii) complete damage of SEN insulation. A uniform 12 mm clog layer with 45% entrapped liquid steel was additionally considered. The simulations showed that parasitic solidification occurred inside an SEN bore with partially or completely absent insulation. SEN clogging was found to promote the solidification of the entrapped melt; without SEN insulation, it could overgrow the clogged region. The jet flow was shown to be accelerated due to the combined effect of the clogging and parasitic solidification; simultaneously, the superheat transport was impaired inside the mold cavity.

Sign in / Sign up

Export Citation Format

Share Document