scholarly journals Exploring the Microalga Euglena cantabrica by Pressurized Liquid Extraction to Obtain Bioactive Compounds

Marine Drugs ◽  
2020 ◽  
Vol 18 (6) ◽  
pp. 308
Author(s):  
Nerea Muñóz-Almagro ◽  
Bienvenida Gilbert-López ◽  
Pozuelo-Rollón M. Carmen ◽  
Yolanda García-Fernandez ◽  
Carlos Almeida ◽  
...  
Keyword(s):  
Chemical Composition ◽  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Liquid Extraction ◽  
Pressurized Liquid Extraction ◽  
Size Exclusion ◽  
Array Detector ◽  
Green Solvents ◽  
Statistical Design Of Experiments ◽  
Pure Ethanol

In the present study, the chemical composition of the microalga Euglena cantabrica was investigated. The extraction of bioactive compounds was done using pressurized liquid extraction (PLE) at different temperatures (40–180 °C) and using green solvents (ethanol-water mixtures). A statistical design of experiments was used to optimize the maximum antioxidant capacity of the extracts by response surface methodology. The antioxidant capacity was determined through the inhibition of 2,2’-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals, while the chemical analyses of the extracts were carried out using different chromatographic techniques. Chlorophylls and carotenoids were analyzed by high-performance liquid chromatography coupled to a diode array detector and mass spectrometry (HPLC-DAD-MS/MS) and carbohydrates by gas chromatography with flame ionization detection (GC-FID) and high-pressure size-exclusion chromatography coupled to an evaporative light-scattering detector (HPSEC-ELSD). The results showed different possibilities for the extraction conditions, depending on the desired bioactivity or chemical composition. Briefly, (i) mixtures of ethanol-water containing around 40% ethanol at 180 °C gave the best antioxidant capacity, (ii) mixtures containing around 50% ethanol at 110 °C gave the best yield of β-glucan paramylon, and (iii) the use of pure ethanol at a low temperature (40 °C) is the best choice for the recovery of carotenoids such as diatoxanthin. Summing up, E. cantabrica seems to be a good candidate to be used in biorefinery to obtain different bioactive compounds.

scholarly journals Combining Pressurized Liquid Extraction and Enzymatic-Assisted Extraction to Obtain Bioactive Non-Extractable Polyphenols from Sweet Cherry (Prunus avium L.) Pomace

2021 ◽  
Author(s):  
Gloria Domínguez-Rodríguez ◽  
María Concepción García ◽  
María Luisa Marina ◽  
Merichel Plaza
Keyword(s):  
Antioxidant Capacity ◽  
Sweet Cherry ◽  
Liquid Extraction ◽  
Pressurized Liquid Extraction ◽  
Size Exclusion ◽  
Trolox Equivalent Antioxidant Capacity ◽  
Total Phenolic ◽  
Assisted Extraction ◽  
Conventional Extraction ◽  
Cherry Pomace

Sweet cherry pomace is a by-product that can be a source of bioactive phenolic compounds. Usually, polyphenols have been extracted using conventional extraction methodologies. However, a significant fraction, called non-extractable polyphenols (NEPs), remains retained in the conventional extraction residues. Therefore, this work is aimed, for the first time, to investigate the release of NEPs from cherry pomace combining pressurized liquid extraction (PLE) and enzyme-assisted extraction (EAE) using Promod enzyme. A response surface methodology was employed to study the influence of temperature, time, and pH on the NEPs extraction. The response variables were the total phenolic content (TPC) measured by Folin-Ciocalteu method, total proanthocyanidin (PA) content evaluated by vanillin, DMAC, and butanol/HCl assays, and total antioxidant capacity determined by Trolox equivalent antioxidant capacity and inhibition of hydroxyl radical assays. The results indicated that PLE-EAE was more suitable and selective to obtain NEPs from sweet cherry pomace than PLE alone. In fact, the extracts obtained by PLE-EAE displayed higher TPC, PA content, and bioactivity than the extracts obtained by PLE under the same extraction conditions, and those obtained by conventional methods. Moreover, size-exclusion chromatography profiles showed that the combination of PLE and EAE enabled the recovery of NEPs with higher molecular weight than PLE without EAE treatment.

scholarly journals Impact of Pressurized Liquid Extraction and pH on Protein Yield, Changes in Molecular Size Distribution and Antioxidant Compounds Recovery from Spirulina

Foods ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 2153
Author(s):  
Jianjun Zhou ◽  
Min Wang ◽  
Celia Carrillo ◽  
Zhenzhou Zhu ◽  
Mladen Brncic ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Molecular Size ◽  
Liquid Extraction ◽  
Protein Yield ◽  
Pressurized Liquid Extraction ◽  
Antioxidant Compounds

The research aims to extract nutrients and bioactive compounds from spirulina using a non-toxic, environmentally friendly and efficient method—Pressurized Liquid Extraction (PLE). In this work, Response Surface Methodology (RSM)–Central Composite Design (CCD) was used to evaluate and optimize the extraction time (5–15 min), temperature (20–60 °C) and pH (4–10) during PLE extraction (103.4 bars). The multi-factor optimization results of the RSM-CCD showed that under the pressure of 103.4 bars, the optimal conditions to recover the highest content of bioactive compounds were 10 min, 40 °C and pH 4. Furthermore, the compounds and antioxidant capacity of PLE and non-pressurized extraction extracts were compared. The results showed that under the optimal extraction conditions (10 min, 40 °C and pH 4), PLE significantly improved the antioxidant capacity (2870.5 ± 153.6 µM TE), protein yield (46.8 ± 3.1%), chlorophyll a (1.46 ± 0.04 mg/g), carotenoids (0.12 ± 0.01 mg/g), total polyphenols (11.49 ± 0.04 mg/g) and carbohydrates content (78.42 ± 1.40 mg/g) of the extracts compared with non-pressurized extraction (p < 0.05). The protein molecular distribution of the extracts was analyzed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), and the results showed that there were more small-molecule proteins in PLE extracts. Moreover, Liquid Chromatography Triple Time of Flight Mass Spectrometry (TOF–LC–MS–MS) was used to analyze the phenolic profile of the extracts, and the results showed the extracts were rich on phenolic compounds, such as p-coumaric acid and cinnamic acid being the predominant phenolic compounds in the PLE extract. This indicates that PLE can promote the extraction of bioactive compounds from Spirulina, which is of great significance for the application of PLE technology to obtain active substances from marine algae resources.

scholarly journals Hot Pressurized Liquid Extraction of Polyphenols from the Skin and Seeds of Vitis vinifera L. cv. Negra Criolla Pomace a Peruvian Native Pisco Industry Waste

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 866
Author(s):  
Erik E. Allcca-Alca ◽  
Nilton C. León-Calvo ◽  
Olivia M. Luque-Vilca ◽  
Maximiliano Martínez-Cifuentes ◽  
José Ricardo Pérez-Correa ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Ethanol Concentration ◽  
Liquid Extraction ◽  
Grape Pomace ◽  
Pressurized Liquid Extraction ◽  
Vitis Vinifera L ◽  
Solvent Mixtures ◽  
Total Polyphenol ◽  
Industry Waste ◽  
Potential Applications

The pisco industry in Peru generates large amounts of grape pomace, which is a natural source of bioactive compounds with potential nutraceutical applications. Hot pressurized liquid extraction (HPLE) with water-ethanol solvent mixtures (20–60%) at high temperatures (100–160 °C) was applied to recover polyphenols from the skin and seeds of a Peruvian pisco-industry grape-pomace waste. At the same HPLE conditions (60% ethanol, 160 °C), the seed fraction extracts contained ~6 times more total polyphenol and presented ~5 times more antioxidant activity than the extract from the skin fraction. The lowest ethanol concentration (20%) and the highest temperature (160 °C) achieved the highest recovery of flavanols with 163.61 µg/g dw from seeds and 10.37 µg/g dw from skins. The recovery of phenolic acids was maximized at the highest ethanol concentration and temperature with 45.34 µg/g dw from seeds and 6.93 µg/g dw from skins. Flavonols were only recovered from the skin, maximized (17.53 µg/g dw) at 20% of ethanol and the highest temperature. The recovery of specific polyphenols is maximized at specific extraction conditions. These conditions are the same for seed and skin extractions. This alternative method can be used in other agroindustrial wastes in order to recover bioactive compounds with potential applications in the pharmaceutical and food industry.

scholarly journals Microwave Assisted Extraction and Pressurized Liquid Extraction of Sulfated Polysaccharides from Fucus virsoides and Cystoseira barbata

Foods ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 1481
Author(s):  
Ana Dobrinčić ◽  
Sandra Pedisić ◽  
Zoran Zorić ◽  
Mladenka Jurin ◽  
Marin Roje ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Chemical Composition ◽  
Liquid Extraction ◽  
Pressurized Liquid Extraction ◽  
Sulfate Group ◽  
Sulfated Polysaccharides ◽  
Microwave Assisted Extraction ◽  
Microwave Assisted ◽  
Assisted Extraction ◽  
Cystoseira Barbata

Sulfated polysaccharide fucoidan isolated from brown algae shows a wide range of biological activities that are significantly dependent on its chemical composition, which is closely related to the applied technique and extraction parameters. Therefore, the objective of this study was to evaluate the influence of microwave assisted extraction (MAE) and pressurized liquid extraction (PLE) parameters (solvent, temperature, time, and number of cycles) on the Fucus virsoides and Cystoseira barbata polysaccharide yield (%PS) and chemical composition (total sugar, fucose, and sulfate group). The optimal MAE parameters that resulted in the highest polysaccharide extraction from F. virsoides and C. barbata were 0.1 M H2SO4 for 10 min at 80 °C, while the optimal PLE parameters were 0.1 M H2SO4, for two cycles of 15 min at 140 °C. Furthermore, the %PS, chemical structure, molecular properties, and antioxidant activity of the F. virsoides and C. barbata polysaccharide extracts obtained with MAE, PLE, and conventional extraction (CE) performed under previously determinate optimal conditions were compared. PLE resulted in a significantly higher %PS from F. virsoides, while for C. barbata, a similar yield was achieved with CE and PLE, as well as CE and MAE, for both algae. Furthermore, the polysaccharides obtained using PLE had the highest polydispersity index, fucose, and sulfate group content, and the lowest uronic acid content; however their antioxidant activity was lower.

Chemical composition, bioactive compounds, antioxidant capacity and stability of floral maize (Zea mays L.) pollen

2014 ◽  
Vol 10 ◽  
pp. 65-74 ◽  
Author(s):  
Slađana Žilić ◽  
Jelena Vančetović ◽  
Marijana Janković ◽  
Vuk Maksimović
Keyword(s):  
Zea Mays ◽  
Chemical Composition ◽  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Zea Mays L

scholarly journals Pressurized liquid extraction of bioactive compounds from grape marc

2019 ◽  
Vol 240 ◽  
pp. 105-113 ◽  
Author(s):  
Débora Tamires Vitor Pereira ◽  
Adriana Gadioli Tarone ◽  
Cinthia Baú Betim Cazarin ◽  
Gerardo Fernández Barbero ◽  
Julian Martínez
Keyword(s):  
Bioactive Compounds ◽  
Liquid Extraction ◽  
Pressurized Liquid Extraction ◽  
Grape Marc

Comparative study of conventional and pressurized liquid extraction for recovering bioactive compounds from Lippia citriodora leaves

2018 ◽  
Vol 109 ◽  
pp. 213-222 ◽  
Author(s):  
Francisco Javier Leyva-Jiménez ◽  
Jesús Lozano-Sánchez ◽  
Isabel Borrás-Linares ◽  
David Arráez-Román ◽  
Antonio Segura-Carretero
Keyword(s):  
Comparative Study ◽  
Bioactive Compounds ◽  
Liquid Extraction ◽  
Pressurized Liquid Extraction ◽  
Lippia Citriodora

scholarly journals Green solvents and Ultrasound-Assisted Extraction of bioactive orange (Citrus sinensis) peel compounds

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Abigail Montero-Calderon ◽  
Clara Cortes ◽  
Ana Zulueta ◽  
Ana Frigola ◽  
Maria J. Esteve
Keyword(s):  
Antioxidant Capacity ◽  
Bioactive Compounds ◽  
Orange Peel ◽  
Green Solvents ◽  
Ultrasound Assisted Extraction ◽  
Total Carotenoids ◽  
Carotenoid Concentration ◽  
Assisted Extraction ◽  
Physicochemical Evaluation ◽  
Ultrasound Assisted

Abstract Byproducts such as orange peel have potential uses because of their bioactive compounds, which are important for their potential to reduce the risk factors of diseases caused by aging. The lack of effective techniques and the high levels of pollution produced by the conventional extraction of bioactive compounds using organic solvents have highlighted the need to enhance the ‘green chemistry’ trend. This study evaluates the use of ultrasound to extract bioactive compounds from orange peel. The antioxidant capacity, phenolic content, ascorbic acid, total carotenoids, and HPLC profile of phenolic compounds from orange peel extracts were obtained by a physicochemical evaluation. The results demonstrate that the optimal conditions for the ultrasound-assisted extraction of bioactive orange peel compounds were a power of 400 W, a time of 30 min, and 50% ethanol in water. These conditions were used to obtain a total carotenoid concentration of 0.63 mg ß-carotene/100 g, vitamin C concentration of 53.78 mg AA/100 g, phenolic concentration of 105.96 mg GAE/100 g, and antioxidant capacity of ORAC = 27.08 mM TE and TEAC = 3.97 mM TE. The major phenolic compound identified in all orange peel extracts was hesperidin, with a maximum concentration of 113.03 ± 0.08 mg/100 g.

scholarly journals Bioactive compounds and antioxidant capacity in fennel seeds influenced by pressurized liquid extraction

2020 ◽  
Vol 79 (OCE2) ◽  
Author(s):  
Maja Repajić ◽  
Petra Tonković ◽  
Valentina Kruk ◽  
Zoran Zorić ◽  
Ivona Elez Garofulić ◽  
...  
Keyword(s):  
Antioxidant Capacity ◽  
Liquid Extraction ◽  
Extraction Time ◽  
Pressurized Liquid Extraction ◽  
Aluminium Chloride ◽  
Effect Of Temperature ◽  
Extraction Temperature ◽  
Foeniculum Vulgare ◽  
Cycle Number ◽  
Antioxidant Power

AbstractFennel (Foeniculum vulgare Mill.) is a well-known aromatic plant, widely used as spice and remedy herb. It provides many beneficial effects and is used as diuretic and expectorant, as well as for various dyspeptic disorders. Beside essential oils, fennel seeds are abundant with various phenols, which are known as strong antioxidants and thereby contribute to human health. Among different extraction methods for phenols isolation, pressurized liquid extraction (PLE) represents a novel technique with numerous advantages over conventional extraction approaches. Its efficiency manifests through combination of high temperature and pressure, enabling extraction time shortening, as well as decreased solvent consumption, thus being environment-friendly technique. In order to achieve maximum extraction yield, it is of great importance to select optimal PLE conditions, e.g., extraction temperature and time. Additionally, solvent selection also affects on content of targeted compounds, where phenols amount depends on polarity of solvent. Hence, the aim of this study was to examine the effect of temperature (75 and 100 °C), static time (5 and 10 min) and cycle number (1, 2 and 3) on total phenols (TP) and total flavonoids (TF) content, as well as the antioxidant capacity (AC) in fennel seeds using three-step exhaustive PLE. Firstly, grinded dry fennel seeds were subjected to PLE using non-polar solvent (hexane) under the mentioned conditions in order to remove seeds' lipid fraction. Afterwards, defatted samples were extracted with polar solvents by the increasing polarity: aqueous acetone solution (30 %, v/v) followed by aqueous methanol solution (30 %, v/v). Obtained acetone (AE) and methanol (ME) extracts (n = 24) were analyzed for TP (Folin-Ciocalteu method), TF (aluminium chloride colorimetric assay) and AC [ferric reducing antioxidant power (FRAP) method]. Multivariate analysis of variance (MANOVA) and Tukey's HSD test (p ≤ 0.05) were applied for statistical analysis of collected data. Expectedly, AE were described with higher values of analyzed parameters (grand means: TP = 416.18 mg/100 g, TF = 41.87 mg/100 g, AC = 359.57 mg AAE/100 g) in comparison with ME (grand means: TP = 80.25 mg/100 g, TF = 16.41 mg/100 g, AC = 96.13 mg AAE/100 g. Furthermore, all examined influences significantly affected TP, TF and AC in all samples, except temperature on TP in ME. Thus, conditions of 100 °C/10 min/3 cycles showed the greatest yield of tested parameters in AE, while 100 °C/5 min/1 cycle were sufficient for maximum TP and AC levels in ME. Regarding TF in ME, slightly longer extraction time was required to achieve the highest efficiency (100 °C/10 min/1 cycle).

Sign in / Sign up

Export Citation Format

Share Document