scholarly journals Mechanics Analysis of 3D Braided Composites Based on the Helix Geometry Model

2010 ◽  
Vol 15 (5) ◽  
pp. 883-888 ◽  
Author(s):  
Tao Zeng ◽  
Lili Jiang
Keyword(s):  
Braided Composites ◽  
Geometry Model ◽  
3D Braided Composites ◽  
Mechanics Analysis ◽  
Helix Geometry

Predicting Mechanical Properties of 3D Braided Composites Using a Helix Geometry Model

2011 ◽  
Vol 19 (4-5) ◽  
pp. 397-400 ◽  
Author(s):  
Lili Jiang ◽  
Tao Zeng ◽  
Shi Yan ◽  
Dai-ning Fang ◽  
Yu Gu
Keyword(s):  
Mechanical Properties ◽  
Braided Composites ◽  
Geometry Model ◽  
3D Braided Composites ◽  
Helix Geometry

Prediction for Strength of 3D Braided Composites Based on Helix Geometry Model

2013 ◽  
Vol 387 ◽  
pp. 64-67
Author(s):  
Li Li Jiang ◽  
Xi Bin Wei ◽  
Xun Liu ◽  
Tao Zeng
Keyword(s):  
Numerical Model ◽  
Cross Section ◽  
Present Model ◽  
Experimental Results ◽  
Micro Structure ◽  
Braided Composites ◽  
Geometry Model ◽  
3D Braided Composites ◽  
Braiding Angle ◽  
Helix Geometry

A numerical model capable of calculating the strength of 3D braided composites is developed, based on the micro-structure of 3D four-directional braided composites and the assumption of the braiding yarn with a helix configuration and ellipse cross-section. The strength of 3D braided composites have been predicted through a finite multiphase element method (FMEM). Comparison was conducted for those from the present model and experiment. The results are in good agreements with the experimental results in the previous literature. The influences of braiding angle on the strength are also studied.

A multiscale elasto-plastic damage model for the nonlinear behavior of 3D braided composites

2019 ◽  
Vol 171 ◽  
pp. 21-33 ◽  
Author(s):  
Chunwang He ◽  
Jingran Ge ◽  
Dexing Qi ◽  
Jiaying Gao ◽  
Yanfei Chen ◽  
...  
Keyword(s):  
Damage Model ◽  
Nonlinear Behavior ◽  
Braided Composites ◽  
3D Braided Composites ◽  
Plastic Damage

Impact tensile behavior and frequency response of 3D braided composites

2011 ◽  
Vol 82 (3) ◽  
pp. 280-287 ◽  
Author(s):  
Xuehui Gan ◽  
Jianhua Yan ◽  
Bohong Gu ◽  
Baozhong Sun
Keyword(s):  
High Strain Rate ◽  
Strain Rate ◽  
Tensile Properties ◽  
High Strain ◽  
Tensile Modulus ◽  
Tensile Failure ◽  
Uniaxial Tensile ◽  
Strain Rates ◽  
Braided Composites ◽  
3D Braided Composites

The uniaxial tensile properties of 4-step 3D braided E-glass/epoxy composites under quasi-static and high-strain rate loadings have been investigated to evaluate the tensile failure mode at different strain rates. The uniaxial tensile properties at high strain rates from 800/s to 2100/s were tested using the split Hopkinson tension bar (SHTB) technique. The tensile properties at quasi-static strain rate were also tested and compared with those in high strain rates. Z-transform theory is applied to 3D braided composites to characterize the system dynamic behaviors in frequency domain. The frequency responses and the stability of 3D braided composites under quasi-static and high-strain rate compression have been analyzed and discussed in the Z-transform domain. The results indicate that the stress-strain curves are rate sensitive, and tensile modulus, maximum tensile stress and corresponding tensile strain are also sensitive to the strain rate. The tensile modulus, maximum tensile stress of the 3D braided composites are linearly increased with the strain rate. With increasing of the strain rate (from 0.001/s to 2100/s), the tensile failure of the 3D braided composite specimens has a tendency of transition from ductile failure to brittle failure. The magnitude response and phase response is very different in quasi-static loading with that in high-strain rate loading. The 3D braided composite system is more stable at high strain rate than quasi-static loading.

scholarly journals Open-Hole 3D Braided Composites Strength Prediction and Stress Analysis

2020 ◽  
Vol 38 (4) ◽  
pp. 889-896
Author(s):  
Shuangqiang Liang ◽  
Chenglong Zhang ◽  
Ge Chen ◽  
Qihong Zhou ◽  
Frank Ko
Keyword(s):  
Failure Analysis ◽  
Progressive Failure ◽  
Failure Criteria ◽  
Element Analysis ◽  
Braided Composite ◽  
Failure Initiation ◽  
Geometry Model ◽  
Progressive Failure Analysis ◽  
3D Braided Composites ◽  
Open Hole

The stress concentration caused by notches is a common engineering issue for composite structure application. 3D braided composite possess excellent damage tolerance compared to common laminates. The tensile properties of 3D braided composite with open-hole and un-notched were experimentally examined. The mechanic properties of 3D braided composite in other directions are predicted using FGM (Fabric Geometry Model) and finite element analysis. The stress distributions around the hole and perpendicular to the loading direction are analyzed based on Abaqus software. The simulation results were compared with Lekhnitskii's analytical study. The open-hole strength of 3D braided composite was predicted respectively using Average stress failure criteria, Point stress failure criteria (PSC), and also the progressive failure analysis based on different failure criteria. The predicted strength results were compared to the experimental values. The results show the PSC predicted strength matched the experiment, while the progressive failure analysis can predict the failure initiation, propagation and final failure mode.

Research on Fabricating Technology of Three Dimensional Integrated Braided Composite I Beam

2010 ◽  
Vol 136 ◽  
pp. 59-63 ◽  
Author(s):  
X.Y. Pei ◽  
Jia Lu Li
Keyword(s):  
Cross Section ◽  
High Performance ◽  
Research Result ◽  
Three Dimensional ◽  
Void Content ◽  
Braided Composites ◽  
Braided Composite ◽  
Transfer Molding ◽  
3D Braided Composites

In this paper the fabricating technology of three dimensional (3D) integrated braided composite I beam is researched, including: braiding technology of 3D braided I beam preform, the orientation of fiber-tow in the I beam preform, the optimizing of process parameters of resin transfer molding (RTM) for 3D braided composite I beam, and the design of mould for consolidation of composite I beam. The quality of 3D braided composites is good analyzed by ultrasonic A-scan, void content calculation and microscope observation. The research result will provide a good way for designing and fabricating high performance 3D integrated braided composite components with irregular cross section.

Sign in / Sign up

Export Citation Format

Share Document