scholarly journals Flow and Heat Transfer Past a Stretching/Shrinking Sheet Using Modified Buongiorno Nanoliquid Model

Mathematics ◽  
2021 ◽  
Vol 9 (23) ◽  
pp. 3047
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Emad H. Aly ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Layer Flow ◽  
Shrinking Surface

This paper studies the boundary layer flow and heat transfer characteristics past a permeable isothermal stretching/shrinking surface using both nanofluid and hybrid nanofluid flows (called modified Buongiorno nonliquid model). Using appropriate similarity variables, the PDEs are transformed into ODEs to be solved numerically using the function bvp4c from MATLAB. It was found that the solutions of the resulting system have two branches, upper and lower branch solutions, in a certain range of the suction, stretching/shrinking and hybrid nanofluids parameters. Both the analytic and numerical results are obtained for the skin friction coefficient, local Nusselt number, and velocity and temperature distributions, for several values of the governing parameters. It results in the governing parameters considerably affecting the flow and heat transfer characteristics.

Simulation of time-dependent radiative heat motion over a stretching/shrinking sheet of hybrid Nanofluid: Stability analysis for dual solutions

2022 ◽  
pp. 239779142110690
Author(s):  
Seema Tinker ◽  
SR Mishra ◽  
PK Pattnaik ◽  
Ram Prakash Sharma
Keyword(s):  
Heat Transfer ◽  
Stability Analysis ◽  
Dual Solutions ◽  
The Other ◽  
Time Dependent ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Heat Transfer Characteristics ◽  
Suction Parameter ◽  
Transfer Characteristics

The heat transfer characteristics for the flow of a time-dependent hybrid nanofluid with thermal radiation and source/sink over a stretching/shrinking sheet are examined in the current investigation. We have transformed the governing equations of the presented study into the similarity equations utilizing similarity variables. However, a numerical solution is obtained by using in-build MATLAB code bvp5c. The mass and energy profiles for diverse values of thermophysical parameters are studied together with their physical quantities. It is observed that dual solutions exist, that is, one is upper, and the other is lower branch solution for a definite choice of the unsteadiness parameter. Also, stability analysis is executed to determine the long-term stability of dual solutions, indicating that out of the two, only one is stable and the other is unstable. It is revealed that comparatively, the first solution shows stability, while the second solution shows instability. There is a considerable influence of second-order slip on the problem’s respective flow and heat transfer characteristics. Further, major outcomes also show the dimensionless frictional stress and the magnitude of conventional heat transfer enhancement with growing suction parameter values.

Hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface

2019 ◽  
Vol 29 (9) ◽  
pp. 3110-3127 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

PurposeThis paper aims to investigate the steady flow and heat transfer of a Cu-Al2O3/water hybrid nanofluid over a nonlinear permeable stretching/shrinking surface with radiation effects. The surface velocity condition is assumed to be of the power-law form with an exponent of 1/3. The governing equations of the problem are converted into a system of similarity equations by using a similarity transformation.Design/methodology/approachThe problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The results of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented through graphs and tables for several values of the parameters. The effects of these parameters on the flow and heat transfer characteristics are examined and discussed.FindingsResults found that dual solutions exist for a certain range of the stretching/shrinking and suction parameters. The increment of the skin friction coefficient and reduction of the local Nusselt number on the shrinking sheet is observed with the increasing of copper (Cu) nanoparticle volume fractions for the upper branch. The skin friction coefficient and the local Nusselt number increase when suction parameter is increased for the upper branch. Meanwhile, the temperature increases in the presence of the radiation parameter for both branches.Originality/valueThe problem of Cu-Al2O3/water hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface with radiation effects is the important originality of the present study where the dual solutions for the flow reversals are obtained.

scholarly journals Unsteady Transport Phenomena of Hybrid Al2O3-Cu/H2O Nanofluid Past a Shrinking Slender Cylinder

2021 ◽  
Vol 50 (12) ◽  
pp. 3753-3764
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Similarity Transformations ◽  
Flow And Heat Transfer ◽  
Theoretical Investigations ◽  
Suitable Form ◽  
Layer Flow

Theoretical investigations of unsteady boundary layer flow gain interest due to its relatability to practical settings. Thus, this study proposes a unique mathematical model of the unsteady flow and heat transfer in hybrid nanofluid past a permeable shrinking slender cylinder. The suitable form of similarity transformations is adapted to simplify the complex partial differential equations into a solvable form of ordinary differential equations. A built-in bvp4c function in MATLAB software is exercised to elucidate the numerical analysis for certain concerning parameters, including the unsteadiness and curvature parameters. The bvp4c procedure is excellent in providing more than one solution once sufficient predictions are visible. The present analysis further observed dual solutions that exist in the system of equations. Notable findings showed that by increasing the nanoparticles volume fraction, the skin friction coefficient increases in accordance with the heat transfer rate. In contrast, the decline of the unsteadiness parameter demonstrates a downward trend toward the heat transfer performance.

Mixed convection and stability analysis of stagnation-point boundary layer flow and heat transfer of hybrid nanofluids over a vertical plate

2019 ◽  
Vol 30 (7) ◽  
pp. 3737-3754 ◽  
Author(s):  
Mohammad Ghalambaz ◽  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Stability Analysis ◽  
Mixed Convection ◽  
Boundary Layer Flow ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Layer Flow

Purpose This study aims to study the mixed convection flow and heat transfer of Al2O3-Cu/water hybrid nanofluid over a vertical plate. Governing equations for conservation of mass, momentum and energy for the hybrid nanofluid over a vertical flat plate are introduced. Design/methodology/approach The similarity transformation approach is used to transform the set of partial differential equations into a set of non-dimensional ordinary differential equations. Finite-deference with collocation method is used to integrate the governing equations for the velocity and temperature profiles. Findings The results show that dual solutions exist for the case of opposing flow over the plate. Linear stability analysis was performed to identify a stable solution. The stability analysis shows that the lower branch of the solution is always unstable, while the upper branch of the solution is always stable. The results of boundary layer analysis are reported for the various volume fractions of composite nanoparticles and mixed convection parameter. The outcomes show that the composition of nanoparticles can notably influence the boundary layer flow and heat transfer profiles. It is also found that the trend of the variation of surface skin friction and heat transfer for each of the dual solution branches can be different. The critical values of the mixed convection parameter, λ, where the dual solution branches joint together, are also under the influence of the composition of hybrid nanoparticles. For instance, assuming a total volume fraction of 5 per cent for the mixture of Al2O3 and Cu nanoparticles, the critical value of mixing parameter of λ changes from −3.1940 to −3.2561 by changing the composition of nanofluids from Al2O3 (5 per cent) + Cu (0%) to Al2O3 (2.5%) + Cu (2.5 per cent). Originality/value The mixed convection stability analysis and heat transfer study of hybrid nanofluids for a stagnation-point boundary layer flow are addressed for the first time. The introduced hybrid nanofluid model and similarity solution are new and of interest in both mathematical and physical points of view.

Flow and Heat Transfer Over a Stretched Microsurface

2009 ◽  
Vol 131 (6) ◽  
Author(s):  
Suhil Kiwan ◽  
M. A. Al-Nimr
Keyword(s):  
Heat Transfer ◽  
Friction Coefficient ◽  
Flat Plate ◽  
Skin Friction ◽  
Convection Heat Transfer ◽  
Skin Friction Coefficient ◽  
Slip Parameter ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow And Heat Transfer

The convection heat transfer induced by a stretching flat plate has been studied. Similarity conditions are obtained for the boundary layer equations for a flat plate subjected to a power law temperature and velocity variations. It is found that a similarity solution exists only for a linearly stretching plate and only when the plate is isothermal. The analysis shows that three parameters control the flow and heat transfer characteristics of the problem. These parameters are the velocity slip parameter K1, the temperature slip parameter K2, and the Prandtl number. The effect of these parameters on the flow and heat transfer of the problem has been studied and presented. It is found that the slip velocity parameter affect both the flow and heat transfer characteristics of the problem. It is found that the skin friction coefficient decreases with increasing K1 and most of the changes in the skin friction takes place in the range 0<K1<1. A correlation between the skin friction coefficient and K1 and Rex has been found and presented. It is found that cf=23Rex−0.5(K1+0.64)−0.884 for 0<K1<10 with an error of ±0.8%. Other correlations between Nu and K1 and K2 has been found and presented in Eq. 28.

MHD hybrid nanofluid flow over a permeable stretching/shrinking sheet with thermal radiation effect

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ubaidullah Yashkun ◽  
Khairy Zaimi ◽  
Nor Ashikin Abu Bakar ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Thermal Radiation ◽  
Radiation Effects ◽  
Skin Friction Coefficient ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This study aims to investigate the heat transfer characteristic of the magnetohydrodynamic (MHD) hybrid nanofluid over the linear stretching and shrinking surface in the presence of suction and thermal radiation effects. Design/methodology/approach Mathematical equations are transformed into pairs of self-similarity equations using similarity transformation. Boundary value problem solver (bvp4c) in MATLAB was adopted to solve the system of reduced similarity equations. In this study, the authors particularly examine the flow and heat transfer properties for different values of suction and thermal radiation parameters using single-phase nanofluid model. A comparison of the present results shows a good agreement with the published results. Findings It is noticed that the efficiency of heat transfer of hybrid nanofluid (Cu-Al2O3/H2O) is greater than the nanofluid (Cu/H2O). Furthermore, it is also found that dual solutions exist for a specific range of the stretching/shrinking parameter with different values of suction and radiation parameters. The results indicate that the skin friction coefficient and the local Nusselt number increase with suction effect. The values of the skin friction coefficient increases, but the local Nusselt number decreases for the first solution with the increasing of thermal radiation parameter. It is also observed that suction and thermal radiation widen the range of the stretching/shrinking parameter for which the solution exists. Practical implications In practice, the investigation on the flow and heat transfer of MHD hybrid nanofluid through a stretching/shrinking sheet with suction and thermal radiation effects is very important and useful. The problems related to hybrid nanofluid has numerous real-life and industrial applications, for example microfluidics, manufacturing, transportation, military and biomedical, etc. Originality/value In specific, this study focused on increasing thermal conductivity using a hybrid nanofluid mathematical model. This paper is able to obtain the dual solutions. To the best of author’s knowledge, this study is new and there is no previous published work similar to present study.

Axisymmetric flow of hybrid nanofluid due to a permeable non-linearly stretching/shrinking sheet with radiation effect

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Natalia C. Roşca ◽  
Alin V. Roşca ◽  
Ioan Pop
Keyword(s):  
Design Methodology ◽  
Radiation Effect ◽  
Numerical Solutions ◽  
Axisymmetric Flow ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Shrinking Surface

Purpose This paper aims to report theoretical and numerical results for the problem of laminar axisymmetric flow of hybrid nanofluid over a permeable non-linearly stretching/shrinking sheet with radiation effect. Design/methodology/approach The numerical solutions of the arising boundary value problem are obtained using the function bvp4c from MATLAB for different values of the governing parameters. Findings It is found that the solutions of the ordinary (similarity) differential equations have two branches, upper and lower branch solutions, in a certain range of the stretching/shrinking and suction parameters. To establish which of these solutions are stable and which are not, a stability analysis has been performed. Originality/value To the best of the authors’ knowledge, present results are original and new for the study of fluid flow and heat transfer over a stretching/shrinking surface, as they successfully extend the problem considered by Mustafa et al. (2015) to the case of hybrid nanofluids.

scholarly journals Effects of Second-Order Slip and Viscous Dissipation on the Analysis of the Boundary Layer Flow and Heat Transfer Characteristics of a Casson Fluid

2016 ◽  
Vol 21 (1) ◽  
pp. 48 ◽  
Author(s):  
Mohammad M. Rahman ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Stability Analysis ◽  
Boundary Layer Flow ◽  
Casson Fluid ◽  
Shrinking Sheet ◽  
Solution Branch ◽  
Heat Transfer Characteristics ◽  
Flow And Heat Transfer ◽  
Layer Flow

The aim of the present study is to analyze numerically the steady boundary layer flow and heat transfer characteristics of Casson fluid with variable temperature and viscous dissipation past a permeable shrinking sheet with second order slip velocity. Using appropriate similarity transformations, the basic nonlinear partial differential equations have been transformed into ordinary differential equations. These equations have been solved numerically for different values of the governing parameters namely: shrinking parametersuction parameterCasson parameterfirst order slip parametersecond order slip parameter  Prandtl number  and the Eckert number  using the bvp4c function from MATLAB. A stability analysis has also been performed. Numerical results have been obtained for the reduced skin-friction, heat transfer and the velocity and temperature profiles. The results indicate that dual solutions exist for the shrinking surface for certain values of the parameter space. The stability analysis indicates that the lower solution branch is unstable, while the upper solution branch is stable and physically realizable. In addition, it is shown that for a viscous fluida very good agreement exists between the present numerical results and those reported in the open literature. The present results are original and new for the boundary-layer flow and heat transfer past a shrinking sheet in a Casson fluid. Therefore, this study has importance for researchers working in the area of non-Newtonian fluids, in order for them to become familiar with the flow behavior and properties of such fluids.  

Sign in / Sign up

Export Citation Format

Share Document