scholarly journals A FEM-Green Approach for Magnetic Field Problems with Open Boundaries

Mathematics ◽  
2021 ◽  
Vol 9 (14) ◽  
pp. 1662
Author(s):  
Jacques Lobry
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Element Method ◽  
Boundary Element ◽  
Galerkin Approximation ◽  
Outer Region ◽  
Open Boundary ◽  
Element Approximation ◽  
Green Approach ◽  
Element Method

A new finite element method/boundary element method (FEM/BEM) scheme is proposed for the solution of the 2D magnetic static and quasi-static problems with unbounded domains. The novelty is an original approach in the treatment of the outer region. The related domain integral is eliminated at the discrete level by using the finite element approximation of the fundamental solutions (Green’s functions) at every node of the related mesh. This “FEM-Green” approach replaces the standard boundary element method. It is simpler to implement because no integration on the boundary of the domain is required. Then, the method leads to a substantially reduced computational burden. Moreover, the coupling with finite elements is more natural since it is based on the same Galerkin approximation. Some examples with open boundary and nonlinear materials are presented and compared with the standard finite element method.

Postbuckling Analysis of Plates Under Combined Loads by a Mixed Finite Element and Boundary Element Method

1993 ◽  
Vol 115 (3) ◽  
pp. 262-267 ◽  
Author(s):  
J. Q. Ye
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Element Method ◽  
Boundary Element ◽  
Mixed Boundary ◽  
Mixed Finite Element ◽  
Plane Deformation ◽  
Thin Plates ◽  
Combined Loads ◽  
Element Method

The postbuckling behavior of thin plates under combined loads is studied in this paper by using a mixed boundary element and finite element method. The transverse and the in-plane deformation of the plates are analyzed by the boundary element method and the finite element method, respectively. Spline functions were used as the interpolation functions and shape functions in the solution of both methods. A quadratic rectangular spline element is adopted in the finite element procedure. Numerical results are given for typical problems to show the effectiveness of the proposed approach. The possibilities to extend the method developed in this paper to more complicated postbuckling problems are discussed in the concluding section.

Simulation of Axisymmetric Forming Processes, With Friction, Coupling Finite Elements and Boundary Elements

2006 ◽  
Author(s):  
Dominique Bigot ◽  
Hocine Kebir ◽  
Jean-Marc Roelandt
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Element Method ◽  
Finite Elements ◽  
Boundary Element ◽  
Symmetric Part ◽  
Forming Process ◽  
Optimal Shapes ◽  
Numerical Software ◽  
Element Method

Nowadays, the simulation of forming processes is rather well integrated in the industrial numerical codes. However, to take into account the possible modifications of the tool during cycle of working, we develop dedicated numerical software. This one more particularly will allow the identification of the fatigue criteria of the tool. With the view to conceiving the optimal shapes of tool allowing increasing their lifespan while ensuring a quality required of the part thus manufactured. This latter uses coupling with friction finite element method — for modelling the axi-symmetric part — and boundary element method — for modelling the tool. For the validation, we modeled forming process.

Sign in / Sign up

Export Citation Format

Share Document