scholarly journals Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete

Materials ◽  
2015 ◽  
Vol 8 (11) ◽  
pp. 7309-7321 ◽  
Author(s):  
Sun-Woo Kim ◽  
Seok-Joon Jang ◽  
Dae-Hyun Kang ◽  
Kyung-Lim Ahn ◽  
Hyun-Do Yun
Keyword(s):  
Mechanical Properties ◽  
Steel Fiber ◽  
Fiber Reinforced ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Alkali Activated

scholarly journals Impacts of Casting Scales and Harsh Conditions on the Thermal, Acoustic, and Mechanical Properties of Indoor Acoustic Panels Made with Fiber-Reinforced Alkali-Activated Slag Foam Concretes

Materials ◽  
2019 ◽  
Vol 12 (5) ◽  
pp. 825 ◽  
Author(s):  
Mastali Mohammad ◽  
Kinnunen Paivo ◽  
Karhu Marjaana ◽  
Abdollahnejad Zahra ◽  
Korat Lidija ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Comparative Study ◽  
Sound Absorption ◽  
Acoustic Properties ◽  
Recycled Aggregates ◽  
Fiber Reinforced ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Harsh Conditions ◽  
Alkali Activated

This paper presents experimental results regarding the efficiency of using acoustic panels made with fiber-reinforced alkali-activated slag foam concrete containing lightweight recycled aggregates produced by using Petrit-T (tunnel kiln slag). In the first stage, 72 acoustic panels with dimension 500 × 500 × 35 mm were cast and prepared. The mechanical properties of the panels were then assessed in terms of their compressive and flexural strengths. Moreover, the durability properties of acoustic panels were studied using harsh conditions (freeze/thaw and carbonation tests). The efficiency of the lightweight panels was also assessed in terms of thermal properties. In the second stage, 50 acoustic panels were used to cover the floor area in a reverberation room. The acoustic absorption in diffuse field conditions was measured, and the interrupted random noise source method was used to record the sound pressure decay rate over time. Moreover, the acoustic properties of the panels were separately assessed by impedance tubes and airflow resistivity measurements. The recorded results from these two sound absorption evaluations were compared. Additionally, a comparative study was presented on the results of impedance tube measurements to compare the influence of casting volumes (large and small scales) on the sound absorption of the acoustic panels. In the last stage, a comparative study was implemented to clarify the effects of harsh conditions on the sound absorption of the acoustic panels. The results showed that casting scale had great impacts on the mechanical and physical properties. Additionally, it was revealed that harsh conditions improved the sound properties of acoustic panels due to their effects on the porous structure of materials.

scholarly journals Stress-Strain Relationship of Steel Fiber Reinforced Alkali Activated Slag Concrete under Static Compression

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Xiaohui Yuan ◽  
Huiting Guan ◽  
Yanyu Shi
Keyword(s):  
Damage Evolution ◽  
Steel Fiber ◽  
Strain Curve ◽  
Fiber Reinforced ◽  
Stress Strain Curve ◽  
Stress Strain ◽  
Alkali Activated Slag ◽  
Strain Relationship ◽  
Activated Slag ◽  
Alkali Activated

Stress-strain curve can accurately reflect the mechanical behavior of materials, and it is very important for structural design and nonlinear numerical analysis. Some cube and prism specimens were made to investigate the physical and mechanical properties of steel fiber reinforced alkali activated slag concrete (AASC); test results show that the strength, Young’s Elastic Modulus, and Poisson’s ratio all increase with the increase of steel fiber content. The steel fiber reinforced AASC shows an excellent postcracking behavior. Damage evolution parameter (D) was used to describe the formation and propagation of cracks, and continuum damage evolution model of steel fiber reinforced AASC was established by Weibull and Cauchy distribution. The establishing model can well describe the geometric characteristics of the key points of the concrete materials stress-strain curve. Finally, the accuracy of the model was verified by comparing the test stress-strain relationship curve of steel fiber reinforced AASC.

scholarly journals The Effect of Different Types of Internal Curing Liquid on the Properties of Alkali-Activated Slag (AAS) Mortar

2021 ◽  
Vol 13 (4) ◽  
pp. 2407
Author(s):  
Guang-Zhu Zhang ◽  
Xiao-Yong Wang ◽  
Tae-Wan Kim ◽  
Jong-Yeon Lim ◽  
Yi Han
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Deionized Water ◽  
Internal Curing ◽  
Control Group ◽  
Alkali Activated Slag ◽  
Different Types ◽  
Naoh Solution ◽  
Activated Slag ◽  
Alkali Activated

This study shows the effect of different types of internal curing liquid on the properties of alkali-activated slag (AAS) mortar. NaOH solution and deionized water were used as the liquid internal curing agents and zeolite sand was the internal curing agent that replaced the standard sand at 15% and 30%, respectively. Experiments on the mechanical properties, hydration kinetics, autogenous shrinkage (AS), internal temperature, internal relative humidity, surface electrical resistivity, ultrasonic pulse velocity (UPV), and setting time were performed. The conclusions are as follows: (1) the setting times of AAS mortars with internal curing by water were longer than those of internal curing by NaOH solution. (2) NaOH solution more effectively reduces the AS of AAS mortars than water when used as an internal curing liquid. (3) The cumulative heat of the AAS mortar when using water for internal curing is substantially reduced compared to the control group. (4) For the AAS mortars with NaOH solution as an internal curing liquid, compared with the control specimen, the compressive strength results are increased. However, a decrease in compressive strength values occurs when water is used as an internal curing liquid in the AAS mortar. (5) The UPV decreases as the content of zeolite sand that replaces the standard sand increases. (6) When internal curing is carried out with water as the internal curing liquid, the surface resistivity values of the AAS mortar are higher than when the alkali solution is used as the internal curing liquid. To sum up, both NaOH and deionized water are effective as internal curing liquids, but the NaOH solution shows a better performance in terms of reducing shrinkage and improving mechanical properties than deionized water.

Effect of Water-Soluble Carbon Nanotubes on the Mechanical Properties and early Hydration of Alkali-Activated Slag

2014 ◽  
Vol 1000 ◽  
pp. 118-121 ◽  
Author(s):  
Pavel Rovnaník ◽  
Patrik Bayer
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Cementitious Materials ◽  
Water Soluble ◽  
Strength Parameters ◽  
Early Hydration ◽  
Alkali Activated Slag ◽  
Activated Slag ◽  
Hydration Characteristics ◽  
Alkali Activated

Alkali-activated slag (AAS) is a material which has great potential for use in building industry. The aim of this work was to gain new superior properties by the addition of carbon nanotubes (CNTs). This material can act as a microreinforcement improving mechanical properties of cementitious materials. The effect of 0–1 wt.% addition of CNTs on the mechanical properties, hydration characteristics and microstructure of AAS binder was determined. The addition of CNTs delays the setting of the binder and a partial deterioration of strength parameters was observed.

Sign in / Sign up

Export Citation Format

Share Document