scholarly journals Comparison of Aerosol Pt, Au and Ag Nanoparticles Agglomerates Laser Sintering

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 227
Author(s):  
Kirill Khabarov ◽  
Messan Nouraldeen ◽  
Sergei Tikhonov ◽  
Anna Lizunova ◽  
Olesya Seraya ◽  
...  

In this paper, we investigated the interaction of nanosecond pulsed-periodic infrared (IR) laser radiation at a 50 and 500 Hz repetition rate with aerosol platinum (Pt) and silver (Ag) nanoparticles agglomerates obtained in a spark discharge. Results showed the complete transformation of Pt dendrite-like agglomerates with sizes of 300 nm into individual spherical nanoparticles directly in a gas flow under 1053 nm laser pulses with energy density 3.5 mJ/cm2. Notably, the critical energy density required for this process depended on the size distribution and extinction of agglomerates nanoparticles. Based on the extinction cross-section spectra results, Ag nanoparticles exhibit a weaker extinction in the IR region in contrast to Pt, so they were not completely modified even under the pulses with energy density up to 12.7 mJ/cm2. The obtained results for Ag and Pt laser sintering were compared with corresponding modification of gold (Au) nanoparticles studied in our previous work. Here we considered the sintering mechanisms for Ag, Pt and Au nanoparticles agglomerates in the aerosol phase and proposed the model of their laser sintering based on one-stage for Pt agglomerates and two-stage shrinkage processes for Au and Ag agglomerates.

Author(s):  
Mate Csanad ◽  
Tamas Csorgo ◽  
Ze-Fang Jiang ◽  
Chun-Bin Yang

Accelerating, exact, explicit and simple solutions of relativistic hydrodynamics allow for a simple and natural description of highly relativistic p+p collisions. These solutions yield a finite rapidity distribution, thus they lead to an advanced estimate of the initial energy density of high energy collisions. We show that such an advanced estimate yields an initial energy density in $\sqrt{s}=7$ and 8 TeV p+p collisions at LHC around or above the critical energy density from lattice QCD, and a corresponding initial temperature above the critical temperature from QCD and the Hagedorn temperature. This suggests that the collision energy of the LHC corresponds to a large enough initial energy density to create a non-hadronic perfect fluid even in pp collisions. %We also show, that several times the %critical energy density may have been reached in high multiplicity events, hinting at a non-hadronic medium created in %high multiplicity $\sqrt{s}=7$ and 8 TeV p+p collisions.


1985 ◽  
Vol 53 ◽  
Author(s):  
A. Christou ◽  
T. Efthimiopoulos ◽  
G. Kyriakidis ◽  
C. Varmazis

ABSTRACTExcimer laser annealing at 248 nm has resulted in the recrystallization of a-GaAs on (100) silicon. An AlAs encapsulation layer was found to be necessary to prevent the loss of arsenic during laser annealing. An energy density of 105 mJ/cm2 was the critical energy density which gave optimum results. Field effect transistors were fabricated on the regrown (100) GaAs utilizing ion implantation for the n-type channel, and resulted in a transconductance of 70–80 mS/mm.


2013 ◽  
Vol 534 ◽  
pp. 107-112
Author(s):  
Hui Zhang ◽  
Takuya Komori ◽  
Zulfakri bin Mohamad ◽  
You Yin ◽  
Sumio Hosaka

We numerically modeled the process of exposure and development of the calixarene negative resist and ZEP520 positive resist in electron beam lithography (EBL) in order to understand the limitation of nanopatterning of these two resists and to improve the resolution of the patterning. From the calculation of energy deposition distribution (EDD) in resist at various beam diameters, it is obvious that the fine probe beam with a diameter of 2 nm and thin resist should be adopted for formation of very fine dots. The simulation of resist development profile indicates that a dot size of 2 nm with a pitch of 20 nm can even be obtained at a higher critical energy density by using calixarene resist, while it cannot form the small pattern by using the ZEP520 resist because of the capillary force.


2020 ◽  
Vol 102 (2) ◽  
Author(s):  
Z. Borjan ◽  
O. A. Vasilyev ◽  
P. J. Upton ◽  
S. Dietrich

Universe ◽  
2021 ◽  
Vol 7 (9) ◽  
pp. 327
Author(s):  
Gabriele Barca ◽  
Eleonora Giovannetti ◽  
Giovanni Montani

We present a review on some of the basic aspects concerning quantum cosmology in the presence of cut-off physics as it has emerged in the literature during the last fifteen years. We first analyze how the Wheeler–DeWitt equation describes the quantum Universe dynamics, when a pure metric approach is concerned, showing how, in general, the primordial singularity is not removed by the quantum effects. We then analyze the main implications of applying the loop quantum gravity prescriptions to the minisuperspace model, i.e., we discuss the basic features of the so-called loop quantum cosmology. For the isotropic Universe dynamics, we compare the original approach, dubbed the μ0 scheme, and the most commonly accepted formulation for which the area gap is taken as physically scaled, i.e., the so-called μ¯ scheme. Furthermore, some fundamental results concerning the Bianchi Universes are discussed, especially with respect to the morphology of the Bianchi IX model. Finally, we consider some relevant criticisms developed over the last ten years about the real link existing between the full theory of loop quantum gravity and its minisuperspace implementation, especially with respect to the preservation of the internal SU(2) symmetry. In the second part of the review, we consider the dynamics of the isotropic Universe and of the Bianchi models in the framework of polymer quantum mechanics. Throughout the paper, we focus on the effective semiclassical dynamics and study the full quantum theory only in some cases, such as the FLRW model and the Bianchi I model in the Ashtekar variables. We first address the polymerization in terms of the Ashtekar–Barbero–Immirzi connection and show how the resulting dynamics is isomorphic to the μ0 scheme of loop quantum cosmology with a critical energy density of the Universe that depends on the initial conditions of the dynamics. The following step is to analyze the polymerization of volume-like variables, both for the isotropic and Bianchi I models, and we see that if the Universe volume (the cubed scale factor) is one of the configurational variables, then the resulting dynamics is isomorphic to that one emerging in loop quantum cosmology for the μ¯ scheme, with the critical energy density value being fixed only by fundamental constants and the Immirzi parameter. Finally, we consider the polymer quantum dynamics of the homogeneous and inhomogeneous Mixmaster model by means of a metric approach. In particular, we compare the results obtained by using the volume variable, which leads to the emergence of a singularity- and chaos-free cosmology, to the use of the standard Misner variable. In the latter case, we deal with the surprising result of a cosmology that is still singular, and its chaotic properties depend on the ratio between the lattice steps for the isotropic and anisotropic variables. We conclude the review with some considerations of the problem of changing variables in the polymer representation of the minisuperspace dynamics. In particular, on a semiclassical level, we consider how the dynamics can be properly mapped in two different sets of variables (at the price of having to deal with a coordinate dependent lattice step), and we infer some possible implications on the equivalence of the μ0 and μ¯ scheme of loop quantum cosmology.


Sign in / Sign up

Export Citation Format

Share Document