scholarly journals Preliminary Study on the Simulation of a Radiation Damage Analysis of Biodegradable Polymers

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6777
Author(s):  
Ha-Eun Shim ◽  
Yeong-Heum Yeon ◽  
Dae-Hee Lim ◽  
You-Ree Nam ◽  
Jin-Hyung Park ◽  
...  
Keyword(s):  
Biodegradable Polymers ◽  
Irradiation Dose ◽  
Gamma Ray ◽  
Damage Model ◽  
Attenuated Total Reflection ◽  
Radiation Processing ◽  
Cleavage Reaction ◽  
Scanning Calorimetry ◽  
Physicochemical Changes ◽  
Chain Cleavage

In this study, biodegradable poly(L-lactide-co-ε-caprolactone) (PLCL) and poly(L-co-d,l lactide) (PLDLA) were evaluated using Geant4 (G4EmStandardPhysics_option4) for damage simulation, in order to predict the safety of these biodegradable polymers against gamma ray sterilization. In the PLCL damage model, both chain scission and crosslinking reactions appear to occur at a radiation dose in the range 0–200 kGy, but the chain cleavage reaction is expected to be relatively dominant at high irradiation doses above 500 kGy. On the other hand, the PLDLA damage model predicted that the chain cleavage reaction would prevail at the total irradiation dose (25–500 kGy). To verify the simulation results, the physicochemical changes in the irradiated PLCL and PLDLA films were characterized by GPC (gel permeation chromatography), ATR-FTIR (attenuated total reflection Fourier transform infrared), and DSC (difference scanning calorimetry) analyses. The Geant4 simulation curve for the radiation-induced damage to the molecular weight was consistent with the experimentally obtained results. These results imply that the pre-simulation study can be useful for predicting the optimal irradiation dose and ensuring material safety, particularly for implanted biodegradable materials in radiation processing.

Positron Lifetimes and Crystallinity of γ-Irradiated Polypropylenes

2012 ◽  
Vol 733 ◽  
pp. 163-166
Author(s):  
Zhe Chen ◽  
Wei Huang ◽  
Peng Fei Fang ◽  
Wen Yu ◽  
Shao Jie Wang
Keyword(s):  
Differential Scanning Calorimetry ◽  
Irradiation Dose ◽  
Gamma Ray ◽  
Positron Lifetime ◽  
Γ Irradiation ◽  
Scanning Calorimetry ◽  
Γ Ray ◽  
Positron Lifetimes ◽  
Dsc Method ◽  
Low Irradiation

The microstructure of the polypropylenes (PP) irradiated by gamma ray was studied by positron lifetime technique and differential scanning calorimetry (DSC). Lifetime measurement shows o-Ps intensity decreases with increasing γ irradiation dose. The crystallinity of irradiated samples was detected by DSC method. The correlation between o-Ps intensity and crystallinity indicates γ-ray can induce higher crystallinity in the polypropylene at low irradiation dose.

scholarly journals Effects of Electron Beam Irradiation on the Mechanical, Thermal, and Surface Properties of Some EPDM/Butyl Rubber Composites

Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1206 ◽  
Author(s):  
Maria Stelescu ◽  
Anton Airinei ◽  
Elena Manaila ◽  
Gabriela Craciun ◽  
Nicusor Fifere ◽  
...  
Keyword(s):  
Electron Beam ◽  
Irradiation Dose ◽  
Electron Beam Irradiation ◽  
Contact Angles ◽  
Butyl Rubber ◽  
Attenuated Total Reflection ◽  
Beam Irradiation ◽  
Rubber Composites ◽  
Scanning Calorimetry ◽  
Wide Range

The effects of electron beam irradiation on the properties of ethylene propylene diene monomer (EPDM)/butyl rubber composites in presence of a polyfunctional monomer were investigated by means of differential scanning calorimetry (DSC), thermal analysis, scanning electron microscopy (SEM), attenuated total reflection absorption infrared spectroscopy (ATR-IR), and mechanical and surface energy measurements. The samples were exposed over a wide range of irradiation doses (20–150 kGy). The EPDM matrix was modified with butyl rubber, chlorobutyl rubber, and bromobutyl rubber. The gel content and crosslink density were found to increase with the electron beam irradiation dose. The values of the hardness and modulus increased gradually with the irradiation dose, while the tensile strength and elongation at break decreased with increasing irradiation dose. The EPDM/butyl rubber composites presented a higher thermal stability compared to the initial EPDM sample. The incorporation of butyl rubbers into the EPDM matrix led to an increase in material hydrophobicity. A similar trend was observed when the irradiation dose increased. The greatest change in the surface free energy and the contact angles occurs at an irradiation dose of 20 kGy. The Charlesby–Pinner plots prove the tendency to crosslinking as the irradiation dose increases.

scholarly journals Recycling Waste Cotton Cloths for the Isolation of Cellulose Nanocrystals: A Sustainable Approach

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 626
Author(s):  
Siti Hajar Mohamed ◽  
Md. Sohrab Hossain ◽  
Mohamad Haafiz Mohamad Kassim ◽  
Mardiana Idayu Ahmad ◽  
Fatehah Mohd Omar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Cellulose Nanocrystals ◽  
Value Added ◽  
Crystallinity Index ◽  
Attenuated Total Reflection ◽  
Cellulose Content ◽  
Scanning Calorimetry ◽  
Good Thermal Stability ◽  
Alkaline Pulping ◽  
Hydrolysis Of Cellulose

There is an interest in the sustainable utilization of waste cotton cloths because of their enormous volume of generation and high cellulose content. Waste cotton cloths generated are disposed of in a landfill, which causes environmental pollution and leads to the waste of useful resources. In the present study, cellulose nanocrystals (CNCs) were isolated from waste cotton cloths collected from a landfill. The waste cotton cloths collected from the landfill were sterilized and cleaned using supercritical CO2 (scCO2) technology. The cellulose was extracted from scCO2-treated waste cotton cloths using alkaline pulping and bleaching processes. Subsequently, the CNCs were isolated using the H2SO4 hydrolysis of cellulose. The isolated CNCs were analyzed to determine the morphological, chemical, thermal, and physical properties with various analytical methods, including attenuated total reflection-Fourier transform-infrared spectroscopy (ATR-FTIR), field-emission scanning electron microscopy (FE-SEM), energy-filtered transmission electron microscopy (EF-TEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The results showed that the isolated CNCs had a needle-like structure with a length and diameter of 10–30 and 2–6 nm, respectively, and an aspect ratio of 5–15, respectively. Additionally, the isolated CNCs had a high crystallinity index with a good thermal stability. The findings of the present study revealed the potential of recycling waste cotton cloths to produce a value-added product.

scholarly journals Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna
Keyword(s):  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Chemical Structures ◽  
Atomic Force ◽  
Polymeric Blends ◽  
Ft Ir ◽  
Acrylate Monomers ◽  
Synthesized Materials

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).

scholarly journals Silver Nanoparticles from Oregano Leaves’ Extracts as Antimicrobial Components for Non-Infected Hydrogel Contact Lenses

2021 ◽  
Vol 22 (7) ◽  
pp. 3539
Author(s):  
Anastasia Meretoudi ◽  
Christina N. Banti ◽  
Panagiotis K. Raptis ◽  
Christina Papachristodoulou ◽  
Nikolaos Kourkoumelis ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Contact Lenses ◽  
Attenuated Total Reflection ◽  
Bacterial Strains ◽  
Scanning Calorimetry ◽  
X Ray ◽  
E Coli ◽  
Polymer Hydrogels ◽  
20 Nm ◽  
And Staphylococcus Aureus

The oregano leaves’ extract (ORLE) was used for the formation of silver nanoparticles (AgNPs(ORLE)). ORLE and AgNPs(ORLE) (2 mg/mL) were dispersed in polymer hydrogels to give the pHEMA@ORLE_2 and pHEMA@AgNPs(ORLE)_2 using hydroxyethyl–methacrylate (HEMA). The materials were characterized by X-ray fluorescence (XRF) spectroscopy, X-ray powder diffraction analysis (XRPD), thermogravimetric differential thermal analysis (TG-DTA), derivative thermogravimetry/differential scanning calorimetry (DTG/DSC), ultraviolet (UV-Vis), and attenuated total reflection mode (ATR-FTIR) spectroscopies in solid state and UV–Vis in solution. The crystallite size value, analyzed with XRPD, was determined at 20 nm. The antimicrobial activity of the materials was investigated against Gram-negative bacterial strains Pseudomonas aeruginosa (P. aeruginosa) and Escherichia coli (E. coli). The Gram-positive ones of the genus of Staphylococcus epidermidis (S. epidermidis) and Staphylococcus aureus (S. aureus) are known to be involved in microbial keratitis by the means of inhibitory zone (IZ), minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). The IZs, which developed upon incubation of P. aeruginosa, E. coli, S. epidermidis, and S. aureus with paper discs soaked in 2 mg/mL of AgNPs(ORLE), were 11.7 ± 0.7, 13.5 ± 1.9, 12.7 ± 1.7, and 14.3 ± 1.7 mm. When the same dose of ORLE was administrated, the IZs were 10.2 ± 0.7, 9.2 ± 0.5, 9.0 ± 0.0, and 9.0 ± 0.0 mm. The percent of bacterial viability when they were incubated over the polymeric hydrogel discs of pHEMA@AgNPs(ORLE)_2 was interestingly low (66.5, 88.3, 77.7, and 59.6%, respectively, against of P. aeruginosa, E. coli, S. epidermidis, and S. aureus) and those of pHEMA@ORLE_2 were 89.3, 88.1, 92.8, and 84.6%, respectively. Consequently, pHEMA@AgNPs(ORLE)_2 could be an efficient candidate toward the development of non-infectious contact lenses.

Synthesis of Amino-Functionalized Graphene Oxide/Azobenzene Polyimide and its Simulation of Optical Switches

2017 ◽  
Vol 231 (11-12) ◽  
Author(s):  
Tianlin Cao ◽  
Fanyu Zhao ◽  
Zulin Da ◽  
Fengxian Qiu ◽  
Dongya Yang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Near Infrared ◽  
Optical Switches ◽  
Attenuated Total Reflection ◽  
Functionalized Graphene ◽  
Visible Spectroscopy ◽  
Scanning Calorimetry ◽  
Functionalized Graphene Oxide ◽  
Uv Visible ◽  
532 Nm

AbstractIn this work, an amino-functionalized graphene oxide (AFGO) was synthesized by graphene oxide (GO) and ethylene diamine. A novel amino-functionalized graphene oxide/azobenzene polyimide (AFGO/ACPI) was synthesized with AFGO, azobenzene chromophore and pyromellitic dianhydride (PMDA). The structure, mechanical and thermal property of AFGO/ACPI were characterized and measured by fourier transform infrared, UV-visible spectroscopy, near-infrared spectrum, thermogravimetric analysis and differential scanning calorimetry. To obtain the refractive index of AFGO/ACPI at different temperature and wavelength (532 nm, 650 nm and 850 nm), the attenuated total reflection (ATR) method was used to measure, and thermo optic coefficients (dn/dT) were −7.22×10

scholarly journals SYNTHESIS OF POLYVINYL ALCOHOL-CHITOSAN HYDROGEL AND STUDY OF ITS SWELLING AND ANTIBACTERIAL PROPERTIES

2013 ◽  
Vol 7 (1) ◽  
pp. 1 ◽  
Author(s):  
Thamrin Wikanta ◽  
Mr Erizal ◽  
Mr Tjahyono ◽  
Mr Sugiyono
Keyword(s):  
Polyvinyl Alcohol ◽  
Irradiation Dose ◽  
Gamma Ray ◽  
Antibacterial Properties ◽  
Positive Control ◽  
Negative Control ◽  
Initial Time ◽  
Water Evaporation ◽  
Combination Technique ◽  
Pva Hydrogel

The aim of this research was to synthesize a hydrogel for wound dressing by mixing of polyvinyl alcohol (PVA) and chitosan (CTS) and processed by combination technique of freezing-thawing and irradiation by gamma ray, and to study of its properties. PVA aqueous solution 10% (w/v) was mixed with 2% (w/v) chitosan (CTS) solution and homogenized. The PVA-CTS mixture was processed by freezing-thawing up to 3 cycles, and then irradiated by gamma rays at the doseranged of 20-50 kGy  (dose rate was 10 kGy/hour). Result showed that PVA-CTS hydrogel with the gel fraction of 83%, 87%, 90%, and 83% were obtained at the irradiation dose of 20 kGy, 30 kGy, 40 kGy, and 50 kGy, respectively. Increasing of irradiation dose caused increasing of water absorption of hydrogel, i.e. 1.700 %, 1.715 %, 1.913 %, and 2.036 %, respectively, and the hydrogel reached the equilibrium in 25 hours. The hydrogel showed very slow water evaporation rate (~ 2%) at the initial time (1 hour) and then increased very fast (up ~50 %) at 24 h, i.e. 43%, 39.13%, 44%, and 53%, respectively. The elongation at break of hydrogels were obtained 245%, 322%, 322%, and 205% with the maximum value were obtained at irradiation dose ranged of 30-40 kGy. The presence of chitosan in the PVA hydrogel made it having higher antibacterial properties with the inhibitionzone value of 8 mm at irradiation dose of 30-40 kGy compared to PVA hydrogel as a negative control (6 mm) and to chloramphenicol as a positive control (8 mm).

Effect of gamma irradiation dose on the fabrication of α-elastin nanoparticles by gamma-ray crosslinking

2011 ◽  
Vol 80 (2) ◽  
pp. 142-144 ◽  
Author(s):  
Mari Fujimoto ◽  
Mayuko Takeda ◽  
Kouji Okamoto ◽  
Masakazu Furuta
Keyword(s):  
Gamma Irradiation ◽  
Irradiation Dose ◽  
Gamma Ray

scholarly journals Poly(furfuryl alcohol)-Polycaprolactone Blends

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1069 ◽  
Author(s):  
Gabriele Nanni ◽  
José A. Heredia-Guerrero ◽  
Uttam C. Paul ◽  
Silvia Dante ◽  
Gianvito Caputo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Furfuryl Alcohol ◽  
Barrier Properties ◽  
Tensile Tests ◽  
Attenuated Total Reflection ◽  
Toxicity Tests ◽  
Scanning Calorimetry ◽  
Blend Films ◽  
Force Microscopy ◽  
Atomic Force

Poly(furfuryl alcohol) (PFA) is a bioresin synthesized from furfuryl alcohol (FA) that is derived from renewable saccharide-rich biomass. In this study, we compounded this bioresin with polycaprolactone (PCL) for the first time, introducing new functional polymer blends. Although PCL is biodegradable, its production relies on petroleum precursors such as cyclohexanone oils. With the method proposed herein, this dependence on petroleum-derived precursors/monomers is reduced by using PFA without significantly modifying some important properties of the PCL. Polymer blend films were produced by simple solvent casting. The blends were characterized in terms of surface topography by atomic force microscopy (AFM), chemical interactions between PCL and PFA by attenuated total reflection-Fourier transform infrared (ATR-FTIR), crystallinity by XRD, thermal properties by differential scanning calorimetry (DSC), and mechanical properties by tensile tests and biocompatibility by direct and indirect toxicity tests. PFA was found to improve the gas barrier properties of PCL without compromising its mechanical properties, and it demonstrated sustained antioxidant effect with excellent biocompatibility. Our results indicate that these new blends can be potentially used in diverse applications ranging from food packing to biomedical devices.

Dosimetric evaluation of methyl red radiochromic film for radiation processing

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Awad AL Zahrany ◽  
Khalid Rabaeh ◽  
Molham Eyadeh ◽  
Ahmed Basfar
Keyword(s):  
Gamma Ray ◽  
Dose Range ◽  
Absorbed Dose ◽  
Radiochromic Film ◽  
High Dose ◽  
Methyl Red ◽  
Radiation Processing ◽  
Content Type ◽  
The Stability ◽  
The Impact

Purpose The purpose of this paper is to present a radiochromic film dosimeter containing polyvinyl alcohol (PVA) matrix and various concentrations of methyl red (MR) dye for high dose measurements. Design/methodology/approach The MR-PVA films were exposed to irradiation up to 60 kGy using 60Co source of gamma ray. The ultraviolet and visible regions (UV/VIS) spectrophotometry were used to examine the optical density of pre-and post-irradiated dosimeters at 424 nm. Findings The dose sensitivity of MR-PVA films increases significantly with increasing MR dye concentrations in the dose range of 5 to 60 kGy. The impact of relative humidity, irradiation temperature, dose rate and the stability of the films has been analyzed. The overall uncertainty of the MR-PVA film dosimeter is 6.12% (Double Standard-deviation, 95% confidence level). Practical implications It was found that the MR-PVA films may be used as high dose dosimeter with an acceptable overall uncertainty in routine industrial radiation processing. Originality/value The color bleaching of irradiated MR-PVA films in terms of specific absorbance curves increases significantly with increasing absorbed dose up to 60 kGy.

Sign in / Sign up

Export Citation Format

Share Document