scholarly journals Influence of 3d Transition Metal Doping on Lithium Stabilized Na-β″-Alumina Solid Electrolytes

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5389
Author(s):  
Cornelius L. Dirksen ◽  
Karl Skadell ◽  
Matthias Schulz ◽  
Micha P. Fertig ◽  
Michael Stelter
Keyword(s):  
Ionic Conductivity ◽  
Transition Metal ◽  
Metal Oxides ◽  
Fracture Strength ◽  
Transition Metal Oxides ◽  
Solid Electrolytes ◽  
Sintering Temperature ◽  
The Other ◽  
Transition Metal Doping ◽  
Secondary Phases

Na-β″-alumina is the commercially most successful solid electrolyte due to its application in ZEBRA and NAS® batteries. In this work, Li-stabilized Na-β″-alumina electrolytes were doped with 3d transition metal oxides, namely TiO2, Mn3O4, and NiO, in order to improve their ionic conductivity and fracture strength. Due to XRD and EDX measurements, it was concluded that Mn- and Ni-ions are incorporated into the crystal lattice of Na-β″-alumina. In contrast, TiO2 doping results in the formation of secondary phases that enable liquid-assisted sintering at temperatures as low as 1500 °C. All dopants increased the characteristic fracture strength of the electrolytes; 1.5 wt% of NiO doping proved to be most efficient and led to a maximal characteristic fracture strength of 296 MPa. Regarding the ionic conductivity, TiO2 doping showed the uppermost value of up to 0.30 S cm−1 at 300 °C. In contrast to the other dopants, TiO2 doping lowered the sintering temperature needed to obtain a dense, stable, and highly conductive Na-β″-alumina electrolyte suitable for applications in Na based batteries.

Separating electronic and ionic conductivity in mix-conducting layered lithium transition-metal oxides

2018 ◽  
Vol 393 ◽  
pp. 75-82 ◽  
Author(s):  
Shanyu Wang ◽  
Mengyu Yan ◽  
Yun Li ◽  
Carolina Vinado ◽  
Jihui Yang
Keyword(s):  
Ionic Conductivity ◽  
Transition Metal ◽  
Metal Oxides ◽  
Transition Metal Oxides

HREM Study of electron-induced surface radiation damage in ReO3

1991 ◽  
Vol 49 ◽  
pp. 636-637
Author(s):  
R. Ai ◽  
H.-J. Fan ◽  
L. D. Marks
Keyword(s):  
Transition Metal ◽  
Metal Ions ◽  
Metal Oxides ◽  
Electron Irradiation ◽  
Transition Metal Oxides ◽  
Carbon Film ◽  
Transition Metal Ions ◽  
Surface Radiation ◽  
Valence Transition ◽  
Electron Microscopes

It has been known for a long time that electron irradiation induces damage in maximal valence transition metal oxides such as TiO2, V2O5, and WO3, of which transition metal ions have an empty d-shell. This type of damage is excited by electronic transition and can be explained by the Knoteck-Feibelman mechanism (K-F mechanism). Although the K-F mechanism predicts that no damage should occur in transition metal oxides of which the transition metal ions have a partially filled d-shell, namely submaximal valence transition metal oxides, our recent study on ReO3 shows that submaximal valence transition metal oxides undergo damage during electron irradiation.ReO3 has a nearly cubic structure and contains a single unit in its cell: a = 3.73 Å, and α = 89°34'. TEM specimens were prepared by depositing dry powders onto a holey carbon film supported on a copper grid. Specimens were examined in Hitachi H-9000 and UHV H-9000 electron microscopes both operated at 300 keV accelerating voltage. The electron beam flux was maintained at about 10 A/cm2 during the observation.

Problems with oxygen analysis in the system MgO-Al2O3-SiO2 with the electron microprobe

1992 ◽  
Vol 50 (2) ◽  
pp. 1624-1625
Author(s):  
Michel Fialin ◽  
Guy Rémond
Keyword(s):  
Transition Metal ◽  
Metal Oxides ◽  
Transition Metal Oxides ◽  
Electrostatic Charge ◽  
Carbon Layer ◽  
Sample Holder ◽  
Rock Matrix ◽  
Electrical Discharges ◽  
Thin Carbon ◽  
Beam Instabilities

Oxygen-bearing minerals are generally strong insulators (e.g. silicates), or if not (e.g. transition metal oxides), they are included within a rock matrix which electrically isolates them from the sample holder contacts. In this respect, a thin carbon layer (150 Å in our laboratory) is evaporated on the sections in order to restore the conductivity. For silicates, overestimated oxygen concentrations are usually noted when transition metal oxides are used as standards. These trends corroborate the results of Bastin and Heijligers on MgO, Al2O3 and SiO2. According to our experiments, these errors are independent of the accelerating voltage used (fig.l).Owing to the low density of preexisting defects within the Al2O3 single-crystal, no significant charge buildup occurs under irradiation at low accelerating voltage (< 10keV). As a consequence, neither beam instabilities, due to electrical discharges within the excited volume, nor losses of energy for beam electrons before striking the sample, due to the presence of the electrostatic charge-induced potential, are noted : measurements from both coated and uncoated samples give comparable results which demonstrates that the carbon coating is not the cause of the observed errors.

scholarly journals Electronic Phenomena of Transition Metal Oxides

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 256
Author(s):  
Christian Rodenbücher ◽  
Kristof Szot
Keyword(s):  
Solid State ◽  
Transition Metal ◽  
Metal Oxides ◽  
Real World ◽  
Transition Metal Oxides ◽  
Major Research ◽  
Research Fields ◽  
Real World Applications

Transition metal oxides with ABO3 or BO2 structures have become one of the major research fields in solid state science, as they exhibit an impressive variety of unusual and exotic phenomena with potential for their exploitation in real-world applications [...]

Recent advances of layered-transition metal oxides for energy-related applications

2021 ◽  
Vol 36 ◽  
pp. 514-550
Author(s):  
Zhihao Lei ◽  
Jang Mee Lee ◽  
Gurwinder Singh ◽  
C.I. Sathish ◽  
Xueze Chu ◽  
...  
Keyword(s):  
Transition Metal ◽  
Metal Oxides ◽  
Transition Metal Oxides ◽  
Recent Advances ◽  
Layered Transition Metal
Sign in / Sign up

Export Citation Format

Share Document