scholarly journals The Influence of Hot-Dip Galvanizing on the Mechanical Properties of High-Strength Steels

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5219
Author(s):  
Milan Šmak ◽  
Jaroslav Kubíček ◽  
Jiří Kala ◽  
Kamil Podaný ◽  
Jan Vaněrek
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Chemical Composition ◽  
Yield Strength ◽  
High Strength Steel ◽  
High Strength Steels ◽  
High Strength ◽  
Steel Members ◽  
Different Types ◽  
Standard Quality

Modern high-strength steels achieve their strength exclusively through the manufacturing process, as the chemical composition of these steels is very similar to the composition of standard-quality steels. Typically, hot-dip galvanizing is used to form a protective zinc layer on the steel parts of structures; nonetheless, the material is exposed to high temperatures during the process. With high-strength steels, this can lead to deterioration of the mechanical properties. This study aims to experimentally examine and evaluate the extent of deterioration of the mechanical properties of high-strength-steel members. The effect was studied on specimens made of three different types of steel with the yield strength ranging from 460 to 1250 MPa. For each type of steel, selected mechanical properties—yield strength, tensile strength, and hardness—were determined on specimens with and without hot-dip galvanization, and the obtained results were mutually compared. Our study shows a significant impact of the hot-dip galvanization process on the mechanical properties of some high-strength steels. With the studied types of steel, the yield strength decreased by up to 18%, the tensile strength by up to 13%, and the hardness by up to 55%.

scholarly journals Effect of Heat Treatment on Mechanical Properties and Microstructure Morphology of Low-Alloy High-Strength Steel

2016 ◽  
Vol 61 (2) ◽  
pp. 475-480
Author(s):  
K. Bolanowski
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Grain Size ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Yield Strength ◽  
High Strength Steel ◽  
High Strength ◽  
Strengthening Phase ◽  
Average Grain Size

Abstract The paper analyzes the influence of different heat treatment processes on the mechanical properties of low-alloy high-strength steel denoted by Polish Standard (PN) as 10MnVNb6. One of the findings is that, after aging, the mechanical properties of rolled steel are high: the yield strength may reach > 600 MPa, and the ultimate tensile strength is > 700 MPa. These properties are largely dependent on the grain size and dispersion of the strengthening phase in the ferrite matrix. Aging applied after hot rolling contributes to a considerable rise in the yield strength and ultimate tensile strength. The process of normalization causes a decrease in the average grain size and coalescence (reduction of dispersion) of the strengthening phase. When 10MnVNb6 steel was aged after normalization, there was not a complete recovery in its strength properties.

Application of 3D digital image correlation for the measurement of the tensile mechanical properties of high-strength steel

2021 ◽  
Vol 63 (4) ◽  
pp. 303-310
Author(s):  
Feipeng Zhu ◽  
Xiaoxia Gu ◽  
Pengxiang Bai ◽  
Dong Lei
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Digital Image Correlation ◽  
Yield Strength ◽  
Digital Image ◽  
High Strength Steel ◽  
High Strength ◽  
Experimental Results ◽  
Image Correlation ◽  
3D Digital Image Correlation

Abstract High-strength steel plays an important role in engineering fields such as infrastructure. For this reason, an accurate determination of its mechanical properties is of critical importance. Considering the inconvenience of conventional mechanical extensometers for the deformation measurement of small-scale specimens, 3D digital image correlation (3D-DIC) was used to measure the deformation of Grade 8.8 bolts and Q690 high-strength steel specimens by means of a uniaxial tensile test, and in this way, stress–strain curves, elastic modulus, yield strength, tensile strength, percentage elongation after fracture, and percentage reduction of area were obtained. Experimental results show that Grade 8.8 bolts and Q690 steel result in higher yield strength and tensile strength than common steel. Moreover, owing to the phenomenon that stress remains constant with strain increase in the yielding stage, the evolution process from elastic deformation to plastic deformation of the specimens during the yielding stage could be studied. Experimental results show that the axial strain of Grade 8.8 bolts increases from 0.3 to 1 % during the yielding stage and for Q690 specimens the corresponding strain increases from 0.4 to 1.8 %.

Thermo-Mechanically Controlled Processed Ultrahigh Strength Steels

2014 ◽  
Vol 783-786 ◽  
pp. 685-691
Author(s):  
Subrata Chatterjee ◽  
S.K. Ghosh ◽  
P.S. Bandyopadhyay
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Yield Strength ◽  
High Strength Steel ◽  
Bainitic Ferrite ◽  
High Strength ◽  
Bearing Steel ◽  
Pressure Vessels ◽  
Low Carbon ◽  
Ultra High Strength Steel

A low-carbon, titanium and niobium (Ti-Nb) bearing and a low-carbon titanium, niobium and copper (Ti-Nb-Cu) bearing ultra high strength steel have been thermo-mechanically processed on a laboratory scale unit. Evolution of microstructure and mechanical properties of the above air cooled steels have been studied at different finish rolling temperatures (FRTs). Microstructural characterization reveals largely a mixture of granular bainite and bainitic ferrite along with the precipitation of microalloying carbide/carbonitride particles and/or Cu-rich precipitates. (Ti-Nb) bearing steel yields higher yield strength (1114-1143 MPa) along with higher tensile strength (1591-1688 MPa) and moderate ductility (12-13%) as compared to (Ti-Nb-Cu) bearing steel having yield strength (934-996 MPa) combined with tensile strength (1434-1464 MPa) and similar ductility (13%) for the selected range of 850-750°C FRT. Due to higher strength-ductility combinations, these present investigated steels can be regarded as the replacement material for ballistic applications as well as other sectors like defense, pipeline, cars, pressure vessels, ships, offshore platforms, aircraft undercarriages and rocket motor casings etc. Key words: Thermo-mechanical controlled processing, ultra high strength steel, microstructure, mechanical properties.

scholarly journals Mechanical Properties of ASTM A572 Grades 50 and 60 Steels at High Temperatures

2021 ◽  
Vol 11 (24) ◽  
pp. 11833
Author(s):  
Su-Hyeon Lee ◽  
Byong-Jeong Choi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Yield Strength ◽  
High Temperatures ◽  
High Strength Steel ◽  
Elevated Temperatures ◽  
High Strength ◽  
Reduction Factor ◽  
Reduction Factors

Studies involving the mechanical properties of high-strength steel (HSS) at elevated temperatures have received considerable attention in recent years. However, current research on HSS at high temperatures is lacking. As a result, the design of fire-protective steel structures with high standards is not sufficiently conservative or safe. This study investigates the effect that elevated temperatures have on the mechanical properties of ASTM A572 Gr. 50 and 60 steels. Reduction factors for the yield strength, tensile strength, and elastic modulus were derived and compared with the standard (AISC, EN1993-1-2) and previous studies (NIST). This study also provides extensive data on the reduction factors for the yield strength, tensile strength, and elastic modulus of mild steel (MS), HSS, and very-high-strength steel (VHSS). The reduction factor for the yield strength was analyzed by expanding the strain level up to 20%. Equations for the yield strength, tensile strength, and elastic modulus were proposed. In future studies, various strains should be analyzed according to the grade of the steel, with the derivation of a reduction factor that considers the plastic strain of the steel. Hence, the findings reported in this study generated a database that can be applied to fire safety design or performance-based fire-resistant design.

Prediction of the Ultimate Tensile Strength in API X70 Line Pipe Steel Using an Artificial Neural Network Model

2019 ◽  
Vol 297 ◽  
pp. 71-81
Author(s):  
Adel Saoudi ◽  
Djahida Lerari ◽  
Farida Khamouli ◽  
L'Hadi Atoui ◽  
Khaldoun Bachari
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Artificial Neural Network ◽  
Tensile Strength ◽  
Chemical Composition ◽  
Ultimate Tensile Strength ◽  
Yield Strength ◽  
High Strength ◽  
Ann Model ◽  
Mean Relative Error

An artificial neural network (ANN) model has been developed for the analysis and simulation of the correlation between the chemical composition and mechanical properties of high strength low alloy (HSLA) steel X70. The input parameters of the model consist of the base metal chemical composition (C, Si, Mn, the sum of Cr+Cu+Ni+Mo, the sum of Nb+Ti+V, carbon equivalent CEpcm) and the yield strength (YS). The outputs of the ANN model include the ultimate tensile strength (UTS) of the test material. Scatter plots, correlation coefficient (R) and mean relative error (MRE) were used to assess the performance of the developed neural network. Interestingly, the model output is efficient to calculate the mechanical properties of high strength low alloy steels, especially the ultimate tensile strength as a function of chemical composition and yield strength of the used material. The obtained results are in a good agreement with experimental ones, with high correlation coefficient and low mean relative error. The predictions accuracy of the developed model also conforms to the results of mean paired T-test.

Thermal Stability of Mechanical Properties of Copper after Equal-Channel Angular Pressing

2008 ◽  
Vol 584-586 ◽  
pp. 960-965 ◽  
Author(s):  
Tamara Kravchenko ◽  
Alexander Korshunov ◽  
Natalia Zhdanova ◽  
Lev Polyakov ◽  
Irina Kaganova
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Tensile Strength ◽  
Chemical Composition ◽  
Yield Strength ◽  
Equal Channel Angular Pressing ◽  
Angular Pressing ◽  
Different Temperatures ◽  
Thermal Stability Of

Annealed oxygen-free and tough-pitch copper samples have been processed by equalchannel angular pressing (ECAP) by route BC. The samples included 8 x 8 mm section pieces and a 40 mm diameter bar. Thermal stability was assessed based on the changes in the standard mechanical properties (conventional yield strength, tensile strength, elongation, proportional elongation and contraction) after annealing at different temperatures for 1 hour. Thermal stability of the same grade of material has been found to be different for different batches and to depend on the structural conditions of deformed material. The zone of thermal stability for copper of the two grades of interest does not depend on the material’s chemical composition.

Structural Performance Evaluation of Built-Up Stub Steel Column with Various Steel Grades under Concentric Loading

2015 ◽  
Vol 764-765 ◽  
pp. 127-131
Author(s):  
Yang Yang ◽  
Kang Min Lee ◽  
Keun Yeong Oh ◽  
Sung Bin Hong
Keyword(s):  
Tensile Strength ◽  
High Strength Steel ◽  
Local Stability ◽  
Experimental Studies ◽  
High Strength Steels ◽  
High Strength ◽  
Design Criteria ◽  
Stability Criteria ◽  
Steel Grades ◽  
Concentric Loading

The current local stability criteria (KBC2009, AISC2010) are enacted through theoretical and experimental studies of ordinary steels, but the mechanical properties of high strength steels are different from ordinary steels. The high strength steel in the applicability of design criteria should be needed to review because of increasing market demanding for high strength steel in the high-rise and long span buildings. In this study, stub columns of H-shaped and box section with various steel grades subjected to concentric loading were investigated, and these steels were checked to the applicability of current local stability criteria. The difference between the ordinary steel and high strength steel was compared. As a result of comparison with various steel grades, most specimens were satisfied with the design criteria, but some specimens with lower tensile strength were not reached the required strength. It is considered that the uncertainty of material was the higher when the tensile strength of material was the lower.

Sign in / Sign up

Export Citation Format

Share Document