scholarly journals Chitin Cryogels Prepared by Regeneration from Phosphoric Acid Solutions

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5191
Author(s):  
Irina V. Tyshkunova ◽  
Dmitry G. Chukhchin ◽  
Iosif V. Gofman ◽  
Ekaterina N. Pavlova ◽  
Vadim A. Ushakov ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Phosphoric Acid ◽  
Biomedical Applications ◽  
Dissolution Time ◽  
X Ray ◽  
Surface Areas ◽  
Natural Polysaccharide ◽  
Cp Mas Nmr ◽  
Highly Porous ◽  
Acid Esters

Cryogelation is a developing technique for the production of polysaccharide materials for biomedical applications. The formation of a macroporous structure during the freeze-drying of polysaccharide solutions creates biomaterials suitable for tissue engineering. Due to its availability, biocompatibility, biodegradability, and non-toxicity, chitin is a promising natural polysaccharide for the production of porous materials for tissue engineering; however, its use is limited due to the difficulty of dissolving it. This work describes the preparation of cryogels using phosphoric acid as the solvent. Compared to typical chitin solvents phosphoric acid can be easily removed from the product and recovered. The effects of chitin dissolution conditions on the structure and properties of cryogels were studied. Lightweight (ρ 0.025–0.059 g/cm3), highly porous (96–98%) chitin cryogels with various heterogeneous morphology were produced at a dissolution temperature of 20 ± 3 °C, a chitin concentration of 3–15%, and a dissolution time of 6–25 h. The crystallinity of the chitin and chitin cryogels was evaluated by 13C CP-MAS NMR spectroscopy and X-ray diffractometry. Using FTIR spectroscopy, no phosphoric acid esters were found in the chitin cryogels. The cryogels had compressive modulus E values from 118–345 kPa and specific surface areas of 0.3–0.7 m2/g. The results indicate that chitin cryogels can be promising biomaterials for tissue engineering.

Engineering of nanometer-sized cross-linked hydrogels for biomedical applications

2010 ◽  
Vol 88 (3) ◽  
pp. 173-184 ◽  
Author(s):  
Jung Kwon Oh
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Tissue Engineering ◽  
Water Content ◽  
Biomedical Applications ◽  
Drug Delivery Systems ◽  
High Water ◽  
Delivery Systems ◽  
High Water Content ◽  
Surface Areas

Microgels/nanogels (micro/nanogels) are promising drug-delivery systems (DDS) because of their unique properties, including tunable chemical and physical structures, good mechanical properties, high water content, and biocompatibility. They also feature sizes tunable to tens of nanometers, large surface areas, and interior networks. These properties demonstrate the great potential of micro/nanogels for drug delivery, tissue engineering, and bionanotechnology. This mini-review describes the current approaches for the preparation and engineering of effective micro/nanogels for drug-delivery applications. It emphasizes issues of degradability and bioconjugation, as well as loading/encapsulation and release of therapeutics from customer-designed micro/nanogels.

scholarly journals Isoreticular Crystallization of Highly Porous Cubic Covalent Organic Cage Compounds

2021 ◽  
Author(s):  
Svetlana Ivanova ◽  
Eva Köster ◽  
Julian J. Holstein ◽  
Niklas Keller ◽  
Guido H. Clever ◽  
...  
Keyword(s):  
Supramolecular Interactions ◽  
Porous Solids ◽  
Molecular Solids ◽  
X Ray Diffraction ◽  
Cage Compounds ◽  
Apical Position ◽  
X Ray ◽  
Alkyl Chains ◽  
Surface Areas ◽  
Highly Porous

<p>Modular frameworks featuring well-defined pore structures in microscale domains establish tailor-made porous materials. For open molecular solids however, maintaining long-range order after desolvation is inherently challenging, since packing is usually governed by only a few supramolecular interactions. Here we report on two series of nanocubes obtained by co-condensation of two different hexahydroxy tribenzotriquinacenes (TBTQs) and benzene-1,4-diboronic acids (BDBAs) with varying linear alkyl chains in 2,5-position. <sup>n</sup>Butyl groups at the apical position of the TBTQ vertices yielded soluble model compounds, which were analyzed by mass spectrometry and NMR spectroscopy. In contrast, methyl-substituted cages spontaneously crystallized as isostructural and highly porous solids with BET surface areas and pore volumes of up to 3426 m<sup>2</sup> g<sup>−1</sup> and 1.82 cm<sup>3</sup> g<sup>−1</sup>. Single crystal X-ray diffraction and sorption measurements revealed an intricate cubic arrangement of alternating micro- and mesopores in the range of 0.97–2.2 nm that are fine-tuned by the alkyl substituents at the BDBA linker.</p>

scholarly journals SYNTHESIS AND CHARACTERIZATION OF COMPOSITES BASED ON HYDROXYAPATITE NANOPARTICLES AND CHITOSAN EXTRACTED FROM SHELLS OF THE FRESHWATER CRAB Potamon algeriense

2020 ◽  
Vol XXV ◽  
pp. 132-142
Author(s):  
Mohammed Lakrat ◽  
Soufiane Fadlaoui ◽  
Mohamed Aaddouz ◽  
Ouahid El Asri ◽  
Mohammed Melhaoui ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biomedical Applications ◽  
Freshwater Crab ◽  
Hydroxyapatite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nanocrystalline Hydroxyapatite

Nanocrystalline hydroxyapatite (n-HAp), which has low crystallinity, has attracted great attention due to its similarity to the inorganic part of human bone. Therefore, many studies have focused on creating new formulations combining n-HAp with some biopolymers, such as chitosan, in order to imitate biological bone tissue. The importance of chitosan and its derivatives in biomedical applications has grown significantly in the last three decades due to its biodegradability and renewable source. Besides, chitosan and its derivatives present excellent biocompatibility and biofunctionality, which make them promising materials in bone tissue engineering. In the present study, the chitosan was, first, extracted from the shell of the freshwater crab species Potamon algeriense following demineralization, deproteinization, decolouration (raw chitin) and deacetylation (chitosan) steps. Then, a novel composite based on n-HAp and extracted chitosan (CTS) with varying chitosan contents, from 5% to 20% (w/w), was synthesized and characterized for potential application in tissue regeneration. The obtained composites were characterized using X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis. The precipitated n-HAp/CTS nanocomposites similar to natural bone are promising composites for bone tissue engineering applications.

scholarly journals Isoreticular Crystallization of Highly Porous Cubic Covalent Organic Cage Compounds

2021 ◽  
Author(s):  
Svetlana Ivanova ◽  
Eva Köster ◽  
Julian J. Holstein ◽  
Niklas Keller ◽  
Guido H. Clever ◽  
...  
Keyword(s):  
Supramolecular Interactions ◽  
Porous Solids ◽  
Molecular Solids ◽  
X Ray Diffraction ◽  
Cage Compounds ◽  
Apical Position ◽  
X Ray ◽  
Alkyl Chains ◽  
Surface Areas ◽  
Highly Porous

<p>Modular frameworks featuring well-defined pore structures in microscale domains establish tailor-made porous materials. For open molecular solids however, maintaining long-range order after desolvation is inherently challenging, since packing is usually governed by only a few supramolecular interactions. Here we report on two series of nanocubes obtained by co-condensation of two different hexahydroxy tribenzotriquinacenes (TBTQs) and benzene-1,4-diboronic acids (BDBAs) with varying linear alkyl chains in 2,5-position. <sup>n</sup>Butyl groups at the apical position of the TBTQ vertices yielded soluble model compounds, which were analyzed by mass spectrometry and NMR spectroscopy. In contrast, methyl-substituted cages spontaneously crystallized as isostructural and highly porous solids with BET surface areas and pore volumes of up to 3426 m<sup>2</sup> g<sup>−1</sup> and 1.82 cm<sup>3</sup> g<sup>−1</sup>. Single crystal X-ray diffraction and sorption measurements revealed an intricate cubic arrangement of alternating micro- and mesopores in the range of 0.97–2.2 nm that are fine-tuned by the alkyl substituents at the BDBA linker.</p>

scholarly journals Preparation and Characterization of Novel Mixed Periodic Mesoporous Organosilica Nanoparticles

Materials ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1569
Author(s):  
Hao Li ◽  
Laurence Raehm ◽  
Clarence Charnay ◽  
Jean-Olivier Durand ◽  
Roser Pleixats
Keyword(s):  
Cetyltrimethylammonium Bromide ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Periodic Mesoporous Organosilica ◽  
X Ray ◽  
Surface Areas ◽  
Mesoporous Organosilica ◽  
Transmission Electron ◽  
Cp Mas Nmr

We report herein the preparation of mixed periodic mesoporous organosilica nanoparticles (E-Pn 75/25 and 90/10 PMO NPs) by sol-gel co-condensation of E-1,2-bis(triethoxysilyl)ethylene ((E)-BTSE or E) with previously synthesized disilylated tert-butyl 3,5-dialkoxybenzoates bearing either sulfide (precursor P1) or carbamate (precursor P2) functionalities in the linker. The syntheses were performed with cetyltrimethylammonium bromide (CTAB) as template in the presence of sodium hydroxide in water at 80 °C. The nanomaterials have been characterized by Transmission Electron Microscopy (TEM), nitrogen-sorption measurements (BET), Dynamic Light Scattering (DLS), zeta-potential, Thermogravimetric Analysis (TGA), FTIR, 13C CP MAS NMR and small angle X-ray diffraction (p-XRD). All the nanomaterials were obtained as mesoporous rodlike-shape nanoparticles. Remarkably, E-Pn 90/10 PMO NPs presented high specific surface areas ranging from 700 to 970 m2g−1, comparable or even higher than pure E PMO nanorods. Moreover, XRD analyses showed an organized porosity for E-P1 90/10 PMO NPs typical for a hexagonal 2D symmetry. The other materials showed a worm-like mesoporosity.

Evaluation of Antibacterial and Antidiabetic Potential of Silver Nanoparticles using Eugenia Uniflora L. Seed Extract

2020 ◽  
Vol 13 (6) ◽  
pp. 5217-5225
Author(s):  
Guru Kumar Dugganaboyana ◽  
Chethankumar Mukunda ◽  
Suresh Darshini Inakanally
Keyword(s):  
Biomedical Applications ◽  
Pathogenic Bacteria ◽  
Seed Extract ◽  
Drug Formulation ◽  
Visible Spectroscopy ◽  
Plant Materials ◽  
X Ray ◽  
Eugenia Uniflora ◽  
Uv Visible

In recent years, green nanotechnology-based approaches using plant materials have been accepted as an environmentally friendly and cost-effective approach with various biomedical applications. In the current study, AgNPs were synthesized using the seed extract of the Eugenia uniflora L. (E.uniflora). Characterization was done using UV-Visible spectroscopy, X-ray diffraction (XRD), scanning electronic microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analyses. The formation of AgNPs has confirmed through UV-Visible spectroscopy (at 466 nm) by the change of color owing to surface Plasmon resonance. Based on the XRD pattern, the crystalline property of AgNPs was established. The functional group existing in seed of E.uniflora extract accountable for the reduction of Ag+ ion and the stabilization of AgNPs was investigated. The morphological structures and elemental composition was determined by SEM and EDX analysis. With the growing application of AgNPs in biomedical perspectives, the biosynthesized AgNPs were evaluated for their antibacterial and along with their antidiabetic potential. The results showed that AgNPs are extremely effective with potent antidiabetic potential at a very low concentration. It also exhibited potential antibacterial activity against the three tested human pathogenic bacteria. Overall, the results highlight the effectiveness and potential applications of AgNPs in biomedical fields such as in the treatment of acute illnesses as well as in drug formulation for treating various diseases such as cancer and diabetes. It could be concluded that E. uniflora seed extract AgNPs can be used efficiently for in vitro evaluation of their antibacterial and antidiabetic effects with potent biomedical applications.

Graphene and Graphene-Based Materials in Biomedical Applications

2019 ◽  
Vol 26 (38) ◽  
pp. 6834-6850 ◽  
Author(s):  
Mohammad Omaish Ansari ◽  
Kalamegam Gauthaman ◽  
Abdurahman Essa ◽  
Sidi A. Bencherif ◽  
Adnan Memic
Keyword(s):  
Tissue Engineering ◽  
Thermal Properties ◽  
Gene Delivery ◽  
Regenerative Medicine ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Two Dimensional ◽  
Drug And Gene Delivery ◽  
Biomedical Fields

: Nanobiotechnology has huge potential in the field of regenerative medicine. One of the main drivers has been the development of novel nanomaterials. One developing class of materials is graphene and its derivatives recognized for their novel properties present on the nanoscale. In particular, graphene and graphene-based nanomaterials have been shown to have excellent electrical, mechanical, optical and thermal properties. Due to these unique properties coupled with the ability to tune their biocompatibility, these nanomaterials have been propelled for various applications. Most recently, these two-dimensional nanomaterials have been widely recognized for their utility in biomedical research. In this review, a brief overview of the strategies to synthesize graphene and its derivatives are discussed. Next, the biocompatibility profile of these nanomaterials as a precursor to their biomedical application is reviewed. Finally, recent applications of graphene-based nanomaterials in various biomedical fields including tissue engineering, drug and gene delivery, biosensing and bioimaging as well as other biorelated studies are highlighted.

Cellulose Nanofibrils-based Hydrogels for Biomedical Applications: Progresses and Challenges

2020 ◽  
Vol 27 (28) ◽  
pp. 4622-4646 ◽  
Author(s):  
Huayu Liu ◽  
Kun Liu ◽  
Xiao Han ◽  
Hongxiang Xie ◽  
Chuanling Si ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Metal Ion ◽  
Biomedical Applications ◽  
Biomedical Application ◽  
Cellulose Nanofibrils ◽  
Wound Dressings ◽  
Preparation Methods ◽  
Tissue Scaffold ◽  
Surface Areas ◽  
Mechanical Methods

Background: Cellulose Nanofibrils (CNFs) are natural nanomaterials with nanometer dimensions. Compared with ordinary cellulose, CNFs own good mechanical properties, large specific surface areas, high Young's modulus, strong hydrophilicity and other distinguishing characteristics, which make them widely used in many fields. This review aims to introduce the preparation of CNFs-based hydrogels and their recent biomedical application advances. Methods: By searching the recent literatures, we have summarized the preparation methods of CNFs, including mechanical methods and chemical mechanical methods, and also introduced the fabrication methods of CNFs-based hydrogels, including CNFs cross-linked with metal ion and with polymers. In addition, we have summarized the biomedical applications of CNFs-based hydrogels, including scaffold materials and wound dressings. Results: CNFs-based hydrogels are new types of materials that are non-toxic and display a certain mechanical strength. In the tissue scaffold application, they can provide a micro-environment for the damaged tissue to repair and regenerate it. In wound dressing applications, it can fit the wound surface and protect the wound from the external environment, thereby effectively promoting the healing of skin tissue. Conclusion: By summarizing the preparation and application of CNFs-based hydrogels, we have analyzed and forecasted their development trends. At present, the research of CNFs-based hydrogels is still in the laboratory stage. It needs further exploration to be applied in practice. The development of medical hydrogels with high mechanical properties and biocompatibility still poses significant challenges.

Synthesis of mussel-inspired polydopamine-gallium nanoparticles for biomedical applications

Nanomedicine ◽  
2021 ◽  
Author(s):  
Jean Valdir Uchôa Teixeira ◽  
Fátima Raquel Azevedo Maia ◽  
Mariana Carvalho ◽  
Rui Reis ◽  
Joaquim Miguel Oliveira ◽  
...  
Keyword(s):  
Cell Proliferation ◽  
Biomedical Applications ◽  
Adipose Derived Stem Cells ◽  
Cell Analysis ◽  
Shell Formation ◽  
X Ray ◽  
Alkali Medium ◽  
Reproducible Method ◽  
Gallium Nanoparticles

Aim: To established a simple, controlled and reproducible method to synthesize gallium (Ga)-coated polydopamine (PDA) nanoparticles (NPs). Materials & methods: PDA NPs were synthesized in alkali medium with posterior Ga shell formation due to ion chelation on the NP surface. Results: The obtained results with energy-dispersive x-ray spectroscopy confirmed the incorporation of Ga on the PDA NP surface. The cytotoxicity of Ga-coated PDA NPs was evaluated in vitro at different concentrations in contact with human adipose-derived stem cells. Further cell analysis also demonstrated the benefit of Ga-coated PDA NPs, which increased the cell proliferation rate compared with noncoated PDA NPs. Conclusion: This study indicated that Ga could work as an appropriate shell for PDA NPs, inducing cell proliferation at the analyzed concentrations.

Sign in / Sign up

Export Citation Format

Share Document