scholarly journals Analysis and Design of Lattice Structures for Rapid-Investment Casting

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4867
Author(s):  
Christopher T. Richard ◽  
Tsz-Ho Kwok
Keyword(s):  
Investment Casting ◽  
Mechanical Performance ◽  
Flow Simulation ◽  
Grain Structure ◽  
Angle Distribution ◽  
Lattice Structures ◽  
Element Analysis ◽  
Analysis And Design ◽  
Topological Features ◽  
Mold Flow

This paper aims to design lattice structures for rapid-investment casting (RIC), and the goal of the design methodology is to minimize casting defects that are related to the lattice topology. RIC can take full advantage of the unprecedented design freedom provided by AM. Since design for RIC has multiple objectives, we limit our study to lattice structures that already have good printability, i.e., self-supported and open-celled, and improve their castability. To find the relationship between topological features and casting performance, various lattice topologies underwent mold flow simulation, finite element analysis, casting experiments, and grain structure analysis. From the results, the features established to affect casting performance in descending order of importance are relative strut size, joint number, joint valence, and strut angle distribution. The features deemed to have the most significant effect on tensile and shear mechanical performance are strut angle distribution, joint number, and joint valence. The practical application of these findings is the ability to optimize the lattice topology with the end goal of manufacturing complex lattice structures using RIC. These lattice structures can be used to create lightweight components with optimized functionality for various applications such as aerospace and medical.

Microstructural and Mechanical Behaviour Evaluation of Mg-Al-Zn Alloy Friction Stir Welded Joint

2020 ◽  
Vol 17 (3) ◽  
pp. 8150-8159
Author(s):  
Kulwant Singh ◽  
Gurbhinder Singh ◽  
Harmeet Singh
Keyword(s):  
Heat Treatment ◽  
Friction Stir Welding ◽  
Magnesium Alloys ◽  
Mechanical Performance ◽  
Fuel Efficiency ◽  
Research Work ◽  
Grain Structure ◽  
Tensile Fracture ◽  
Friction Stir ◽  
The Impact

The weight reduction concept is most effective to reduce the emissions of greenhouse gases from vehicles, which also improves fuel efficiency. Amongst lightweight materials, magnesium alloys are attractive to the automotive sector as a structural material. Welding feasibility of magnesium alloys acts as an influential role in its usage for lightweight prospects. Friction stir welding (FSW) is an appropriate technique as compared to other welding techniques to join magnesium alloys. Field of friction stir welding is emerging in the current scenario. The friction stir welding technique has been selected to weld AZ91 magnesium alloys in the current research work. The microstructure and mechanical characteristics of the produced FSW butt joints have been investigated. Further, the influence of post welding heat treatment (at 260 °C for 1 h) on these properties has also been examined. Post welding heat treatment (PWHT) resulted in the improvement of the grain structure of weld zones which affected the mechanical performance of the joints. After heat treatment, the tensile strength and elongation of the joint increased by 12.6 % and 31.9 % respectively. It is proven that after PWHT, the microhardness of the stir zone reduced and a comparatively smoothened microhardness profile of the FSW joint obtained. No considerable variation in the location of the tensile fracture was witnessed after PWHT. The results show that the impact toughness of the weld joints further decreases after post welding heat treatment.

A Simplified Design Model for Modular Steel Buildings Subject to Vapor Cloud Explosions (VCEs)

2020 ◽  
Vol 14 ◽  
Author(s):  
Osama Bedair
Keyword(s):  
Dynamic Response ◽  
Minimum Cost ◽  
Design Parameters ◽  
Front Wall ◽  
Steel Buildings ◽  
Element Analysis ◽  
Analysis And Design ◽  
Vapor Cloud ◽  
Building Components ◽  
Analytical Expressions

Background: Modular steel buildings (MSB) are extensively used in petrochemical plants and refineries. Limited guidelines are available in the industry for analysis and design of (MSB) subject to accidental vapor cloud explosions (VCEs). Objectives: The paper presents simplified engineering model for modular steel buildings (MSB) subject to accidental vapor cloud explosions (VCEs) that are extensively used in petrochemical plants and refineries. Method: A Single degree of freedom (SDOF) dynamic model is utilized to simulate the dynamic response of primary building components. Analytical expressions are then provided to compute the dynamic load factors (DLF) for critical building elements. Recommended foundation systems are also proposed to install the modular building with minimum cost. Results: Numerical results are presented to illustrate the dynamic response of (MSB) subject to blast loading. It is shown that (DLF)=1.6 is attained at (td/t)=0.4 for front wall (W1) with (td/T)=1.25. For side walls (DLF)=1.41 and is attained at (td/t)=0.6. Conclusions: The paper presented simplified tools for analysis and design of (MSB) subject accidental vapor cloud blast explosions (VCEs). The analytical expressions can be utilized by practitioners to compute the (MSB) response and identify the design parameters. They are simple to use compared to Finite Element Analysis.

scholarly journals Design and Characterization of Microscale Auxetic and Anisotropic Structures Fabricated by Multiphoton Lithography

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 446
Author(s):  
Ioannis Spanos ◽  
Zacharias Vangelatos ◽  
Costas Grigoropoulos ◽  
Maria Farsari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mechanical Performance ◽  
Element Analysis ◽  
Mechanical Responses ◽  
Multiphoton Lithography ◽  
Anisotropic Structures ◽  
Scanning Electron

The need for control of the elastic properties of architected materials has been accentuated due to the advances in modelling and characterization. Among the plethora of unconventional mechanical responses, controlled anisotropy and auxeticity have been promulgated as a new avenue in bioengineering applications. This paper aims to delineate the mechanical performance of characteristic auxetic and anisotropic designs fabricated by multiphoton lithography. Through finite element analysis the distinct responses of representative topologies are conveyed. In addition, nanoindentation experiments observed in-situ through scanning electron microscopy enable the validation of the modeling and the observation of the anisotropic or auxetic phenomena. Our results herald how these categories of architected materials can be investigated at the microscale.

scholarly journals Computational and experimental mechanical performance of a new everolimus-eluting stent purpose-built for left main interventions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Saurabhi Samant ◽  
Wei Wu ◽  
Shijia Zhao ◽  
Behram Khan ◽  
Mohammadali Sharzehee ◽  
...  
Keyword(s):  
Structural Integrity ◽  
Mechanical Performance ◽  
Experimental Studies ◽  
Patient Specific ◽  
Wall Structure ◽  
Left Main ◽  
Element Analysis ◽  
Stent Expansion ◽  
Radial Strength ◽  
Different Diameters

AbstractLeft main (LM) coronary artery bifurcation stenting is a challenging topic due to the distinct anatomy and wall structure of LM. In this work, we investigated computationally and experimentally the mechanical performance of a novel everolimus-eluting stent (SYNERGY MEGATRON) purpose-built for interventions to large proximal coronary segments, including LM. MEGATRON stent has been purposefully designed to sustain its structural integrity at higher expansion diameters and to provide optimal lumen coverage. Four patient-specific LM geometries were 3D reconstructed and stented computationally with finite element analysis in a well-validated computational stent simulation platform under different homogeneous and heterogeneous plaque conditions. Four different everolimus-eluting stent designs (9-peak prototype MEGATRON, 10-peak prototype MEGATRON, 12-peak MEGATRON, and SYNERGY) were deployed computationally in all bifurcation geometries at three different diameters (i.e., 3.5, 4.5, and 5.0 mm). The stent designs were also expanded experimentally from 3.5 to 5.0 mm (blind analysis). Stent morphometric and biomechanical indices were calculated in the computational and experimental studies. In the computational studies the 12-peak MEGATRON exhibited significantly greater expansion, better scaffolding, smaller vessel prolapse, and greater radial strength (expressed as normalized hoop force) than the 9-peak MEGATRON, 10-peak MEGATRON, or SYNERGY (p < 0.05). Larger stent expansion diameters had significantly better radial strength and worse scaffolding than smaller stent diameters (p < 0.001). Computational stenting showed comparable scaffolding and radial strength with experimental stenting. 12-peak MEGATRON exhibited better mechanical performance than the 9-peak MEGATRON, 10-peak MEGATRON, or SYNERGY. Patient-specific computational LM stenting simulations can accurately reproduce experimental stent testing, providing an attractive framework for cost- and time-effective stent research and development.

Polycrystal Simulations Investigating the Effect of Additional Slip System Availability in a 6063 Aluminum Alloy at Elevated Temperature

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Antoinette M. Maniatty ◽  
David J. Littlewood ◽  
Jing Lu
Keyword(s):  
Aluminum Alloy ◽  
Elevated Temperature ◽  
Compression Test ◽  
Elevated Temperatures ◽  
Material Model ◽  
Grain Structure ◽  
Slip Systems ◽  
Modeling Framework ◽  
Element Analysis ◽  
6063 Aluminum Alloy

In order to better understand and predict the intragrain heterogeneous deformation in a 6063 aluminum alloy deformed at an elevated temperature, when additional slip systems beyond the usual octahedral slip systems are active, a modeling framework for analyzing representative polycrystals under these conditions is presented. A model polycrystal that has a similar microstructure to that observed in the material under consideration is modeled with a finite element analysis. A large number of elements per grain (more than 1000) are used to capture well the intragranular heterogeneous response. The polycrystal model is analyzed with three different sets of initial orientations. A compression test is used to calibrate the material model, and a macroscale simulation of the compression test is used to define the deformation history applied to the model polycrystal. In order to reduce boundary condition effects, periodic boundary conditions are applied to the model polycrystal. To investigate the effect of additional slip systems expected to be active at elevated temperatures, the results considering only the 12 {111}⟨110⟩ slip systems are compared to the results with the additional 12 {110}⟨110⟩ and {001}⟨110⟩ slip systems available (i.e., 24 available slip systems). The resulting predicted grain structure and texture are compared to the experimentally observed grain structure and texture in the 6063 aluminum alloy compression sample as well as to the available data in the literature, and the intragranular misorientations are studied.

scholarly journals Macro-, meso- and microstructural characterization of metallic lattice structures manufactured by additive manufacturing assisted investment casting

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
V. H. Carneiro ◽  
S. D. Rawson ◽  
H . Puga ◽  
P. J. Withers
Keyword(s):  
Additive Manufacturing ◽  
Investment Casting ◽  
A356 Alloy ◽  
Microstructural Characterization ◽  
Lattice Structures ◽  
Secondary Phases ◽  
Micro Computed Tomography ◽  
Fused Filament Fabrication ◽  
Promising Alternative ◽  
Heterogeneous Microstructures

AbstractCellular materials are recognized for their high specific mechanical properties, making them desirable in ultra-lightweight applications. Periodic lattices have tunable properties and may be manufactured by metallic additive manufacturing (AM) techniques. However, AM can lead to issues with un-melted powder, macro/micro porosity, dimensional control and heterogeneous microstructures. This study overcomes these problems through a novel technique, combining additive manufacturing and investment casting to produce detailed investment cast lattice structures. Fused filament fabrication is used to fabricate a pattern used as the mold for the investment casting of aluminium A356 alloy into high-conformity thin-ribbed (~ 0.6 mm thickness) scaffolds. X-ray micro-computed tomography (CT) is used to characterize macro- and meso-scale defects. Optical and scanning electron (SEM) microscopies are used to characterize the microstructure of the cast structures. Slight dimensional (macroscale) variations originate from the 3D printing of the pattern. At the mesoscale, the casting process introduces very fine (~ 3 µm) porosity, along with small numbers of (~ 25 µm) gas entrapment defects in the horizontal struts. At a microstructural level, both the (~ 70 μm) globular/dendritic grains and secondary phases show no significant variations across the lattices. This method is a promising alternative means for producing highly detailed non-stochastic metallic cellular lattices and offers scope for further improvement through refinement of filament fabrication.

A Proof of Concept Study of the Mechanical Behavior of Lattice Structures Used to Design a Shoulder Hemi-Prosthesis

2021 ◽  
Author(s):  
Marinela Peto ◽  
Oscar Aguilar-Rosas ◽  
Erick Erick Ramirez-Cedillo ◽  
Moises Jimenez ◽  
Adriana Hernandez ◽  
...  
Keyword(s):  
Mechanical Behavior ◽  
Mechanical Response ◽  
Mechanical Performance ◽  
Cell Attachment ◽  
Lattice Structure ◽  
Material Model ◽  
Patient Specific ◽  
Hexagonal Prism ◽  
Lattice Structures ◽  
Proof Of Concept

Abstract Lattice structures offer great benefits when employed in medical implants for cell attachment and growth (osseointegration), minimization of stress shielding phenomena, and weight reduction. This study is focused on a proof of concept for developing a generic shoulder hemi-prosthesis, from a patient-specific case of a 46 years old male with a tumor on the upper part of his humerus. A personalized biomodel was designed and a lattice structure was integrated in its middle portion, to lighten weight without affecting humerus’ mechanical response. To select the most appropriate lattice structure, three different configurations were initially tested: Tetrahedral Vertex Centroid (TVC), Hexagonal Prism Vertex Centroid (HPVC), and Cubic Diamond (CD). They were fabricated in resin by digital light processing and its mechanical behavior was studied via compression testing and finite element modeling (FEM). The selected structure according to the results was the HPVC, which was integrated in a digital twin of the biomodel to validate its mechanical performance through FEM but substituting the bone material model with a biocompatible titanium alloy (Ti6Al4V) suitable for prostheses fabrication. Results of the simulation showed acceptable levels of Von Mises stresses (325 MPa max.), below the elastic limit of the titanium alloys, and a better response (52 MPa max.) in a model with equivalent elastic properties, with stress performance in the same order of magnitude than the showed in bone’s material model.

scholarly journals Particle Shape Effect on Macroscopic Behaviour of Underground Structures: Numerical and Experimental Study

2015 ◽  
Vol 36 (3) ◽  
pp. 67-74 ◽  
Author(s):  
Krzysztof Szarf ◽  
Gael Combe ◽  
Pascal Villard
Keyword(s):  
Particle Shape ◽  
Load Transfer ◽  
Mechanical Performance ◽  
Flexible Structures ◽  
Discrete Element ◽  
Grain Structure ◽  
Experimental Investigations ◽  
Shape Effect ◽  
Underground Structures ◽  
Buried Pipe

Abstract The mechanical performance of underground flexible structures such as buried pipes or culverts made of plastics depend not only on the properties of the structure, but also on the material surrounding it. Flexible drains can deflect by 30% with the joints staying tight, or even invert. Large deformations of the structure are difficult to model in the framework of Finite Element Method, but straightforward in Discrete Element Methods. Moreover, Discrete Element approach is able to provide information about the grain-grain and grain-structure interactions at the microscale. This paper presents numerical and experimental investigations of flexible buried pipe behaviour with focus placed on load transfer above the buried structure. Numerical modeling was able to reproduce the experimental results. Load repartition was observed, being affected by a number of factors such as particle shape, pipe friction and pipe stiffness.

Sign in / Sign up

Export Citation Format

Share Document