scholarly journals Assessment of the Technological Quality of X5CRNI18-10 Steel Parts after Laser and Abrasive Water Jet Cutting Using Synthetic Index of Technological Quality

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4801
Author(s):  
Marcin Romanowski ◽  
Czesław Łukianowicz ◽  
Marzena Sutowska ◽  
Wojciech Zawadka ◽  
Danil Yurievich Pimenov ◽  
...  
Keyword(s):  
Water Jet ◽  
Cutting Process ◽  
Mean Deviation ◽  
Universal Method ◽  
Abrasive Water Jet ◽  
Water Jet Cutting ◽  
Synthetic Index ◽  
Abrasive Water Jet Cutting ◽  
Technological Quality

Despite extensive knowledge of the cutting methods described, no universal method has been developed so far for evaluating the technological quality of elements shaped by different cutting processes. The aim of the research described in this article was to fill this gap and to propose the author’s methodology for the assessment of the technological quality of the surface of X5CRNI18-10 steel shaped as a result of laser cutting and abrasive water jet cutting. A synthetic index of technological quality assessment of the surface after cutting CTQ (cutting technological quality) was proposed. Three groups of factors were taken into account in the assessment of technological quality of the surface after cutting: selected surface texture parameters (arithmetic mean deviation of the surface Sa and total height of the surface St), results of measurements of dimensional accuracy of cut elements (length deviation LD and width deviation WD) as well as indicators of surface morphology estimated on the basis of microscopic images of the surface after cutting (deformation intensity DI and identification of cutting zones ICZ). On the basis of CTQ values determined, the cutting results of both cutting methods were compared. The analyses presented in this paper proved that the CTQ index can be effectively used to compare the results of a cutting process conducted using different methods and under different conditions. The developed CTQ index is a universal valuation tool, allowing for quantitative evaluation of features related to the technological quality of cutting process results.

scholarly journals Analysis of the Surface Morphology of the S235JRG1 Steel After an Abrasive Water Jet Cutting Process

2018 ◽  
Vol 26 (42) ◽  
pp. 119-126
Author(s):  
Jana Moravčíková ◽  
Daynier Rolando Delgado Sobrino ◽  
Peter Košťál
Keyword(s):  
Surface Roughness ◽  
Water Jet ◽  
Cutting Process ◽  
Abrasive Water Jet ◽  
Water Jet Cutting ◽  
Abrasive Water Jet Cutting ◽  
Jet Nozzle ◽  
The Impact ◽  
Cutting Speeds

Abstract The present paper discusses the impact of the speed of an abrasive water jet cutting process on some surface properties and morphology of the S235JRG1 steel. The values of the cutting speeds used for the analysis were of 100, 150 and 200 mm.min−1 respectively. A contact profile method was used to analyze the surface roughness during the conducted tests. In this study, the observed surface roughness parameters were the Ra, Rt and Rz, respectively. At the same time, these parameters were measured in three positions, i.e.: at the inlet (A), in the middle (B) and at the exit position (C) of the water jet nozzle with respect to the machined material. The experimental study showed that the roughness of the surface reached higher peaks and was more pronounced at the exit position (C) of the water jet. Similarly, it was also concluded that a better quality of the surface was achieved at a speed of 150 mm.min−1.

ISIM Own Contributions on Non-Conventional Abrasive Waterjet Cutting Technologies

2021 ◽  
Vol 890 ◽  
pp. 147-151
Author(s):  
Ion Aurel Perianu ◽  
Gabriela Victoria Mnerie ◽  
Radu Cojocaru ◽  
Emilia Florina Binchiciu
Keyword(s):  
Research Priorities ◽  
Industrial Applications ◽  
Water Jet ◽  
Cutting Process ◽  
Abrasive Waterjet ◽  
Abrasive Water Jet ◽  
Water Jet Cutting ◽  
Abrasive Water Jet Cutting ◽  
Cutting Equipment ◽  
Different Characteristics

Modern materials cutting operations are traditionally part of the research priorities and also in the production activities of ISIM Timișoara. In the last decade, within the institute, a special emphasis was placed on the development of the abrasive water jet cutting process as well as on implementing the research results obtained into industrial activities. The paper presents own achievements and contributions of ISIM to the development of the abrasive water jet cutting process in the following directions: cutting technologies for materials with different characteristics, innovative new patentable solutions regarding the cutting process respectively important modules in the composition of the water jet cutting equipment, ways to recycle used abrasive waste, solutions to streamline the process. The proposed solutions have been verified with good results in industrial applications, or have been proposed for analysis and development together with specialists in the field from important research units.

scholarly journals Study of high-pressure abrasive water jet capacity indices for steep cutting of steels

Mechanik ◽  
2017 ◽  
Vol 90 (11) ◽  
pp. 997-999
Author(s):  
Rafał Kudelski
Keyword(s):  
High Pressure ◽  
New Technologies ◽  
Construction Materials ◽  
Dimensional Accuracy ◽  
Water Jet ◽  
Abrasive Water Jet ◽  
Water Jet Cutting ◽  
Abrasive Water Jet Cutting ◽  
New Construction

Quality of the technological part is one of the major problems of modern machine manufacturing. In many cases, components are manufactured from new construction materials with specific properties that are considered difficult to machining applying conventional technologies. Hence, to search for new technologies, including high-pressure abrasive water jet cutting in the context of the S355J2H steel elements manufacture, while maintaining the quality requirements of the machining, is the need. The results of tests on the accuracy of components made of S355J2H steel are presented as dependent on the water jet pressure, cutting feedrate and the amount of abrasive dozed, with constant element thickness. The accuracy of the design measure – regardless of dimensional accuracy – was the magnitude of the lateral sagging of the cut workpiece resulting from the specific mechanism of water jet removal mechanism.

Sign in / Sign up

Export Citation Format

Share Document