scholarly journals Circulatory Management of Polymer Waste: Recycling into Fine Fibers and Their Applications

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4694
Author(s):  
Alena Opálková Šišková ◽  
Petra Peer ◽  
Anita Eckstein Andicsová ◽  
Igor Jordanov ◽  
Piotr Rychter
Keyword(s):  
Circular Economy ◽  
Polymeric Materials ◽  
Environmental Issues ◽  
Modern Society ◽  
Waste Recycling ◽  
The European Union ◽  
Polymer Waste ◽  
Alternative Technologies ◽  
Centrifugal Spinning ◽  
Polymeric Waste

In modern society, it is impossible to imagine life without polymeric materials. However, managing the waste composed of these materials is one of the most significant environmental issues confronting us in the present day. Recycling polymeric waste is the most important action currently available to reduce environmental impacts worldwide and is one of the most dynamic areas in industry today. Utilizing this waste could not only benefit the environment but also promote sustainable development and circular economy management. In its program statement, the European Union has committed to support the use of sorted polymeric waste. This study reviews recent attempts to recycle this waste and convert it by alternative technologies into fine, nano-, and microscale fibers using electrospinning, blowing, melt, or centrifugal spinning. This review provides information regarding applying reprocessed fine fibers in various areas and a concrete approach to mitigate the threat of pollution caused by polymeric materials.

scholarly journals Recycling of Plastics from Cable Waste from Automotive Industry in Poland as an Approach to the Circular Economy

Polymers ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3845
Author(s):  
Dorota Czarnecka-Komorowska ◽  
Wiktoria Kanciak ◽  
Mateusz Barczewski ◽  
Roman Barczewski ◽  
Roman Regulski ◽  
...  
Keyword(s):  
Circular Economy ◽  
Tensile Modulus ◽  
Optimal Solution ◽  
High Gain ◽  
Waste Recycling ◽  
Polymer Waste ◽  
Ductile Polymer ◽  
New Material ◽  
Internal Mixer ◽  
Moisture Resistant

This paper presents the contemporary problems of polymer waste recycling, mainly recycling cables from end-of-life vehicles. The authors developed a new material based on mixed polymer waste (ASR) modified with a ductile polymer, mainly recycled low-density polyethylene (rLDPE), to produce moisture-resistant boards with beneficial mechanical properties. The ASR-based compositions without and with homogenization process—including physical, chemical, and shear-assisted compatibilization—were successfully applied and verified by evaluating final recycled product properties. The results showed that recycled polyethylene (rLDPE) was effective as a modifier increasing tensile modulus and flexural strength compare to an ASR mixture. It was found that the adding 5 wt % of polyethylene-grafted maleic anhydride (PE-g-MAH) as a compatibilizer to the ASR mixture significantly increases the homogenization of the components in the ASR matrix. The optimal solution for management cable waste is the manufacture of ASR composites with homogenization using an internal mixer the adding 20 wt % of rLDPE and 5 wt % of PE-g-MAH to the mixed plastics cable waste. The results obtained demonstrate that the hot-pressing with the pre-blending with rLDPE and compatibilizer of the ASR based waste provides a high gain in mechanical and usage properties, enabling the circular economy of plastics from automotive cables.

scholarly journals Use and disposal of disposable plastic packaging by retail chains and catering companies

2020 ◽  
Vol 5 (4) ◽  
pp. 356-363
Author(s):  
Elena Yu. Panasenkova ◽  
◽  
Olga E. Gruzdeva ◽  
Maria G. Kuznetsova ◽  
◽  
...  
Keyword(s):  
Waste Recycling ◽  
Plastic Waste ◽  
Raw Material ◽  
Polymer Waste ◽  
Plastic Packaging ◽  
Legal Documents ◽  
Effective System ◽  
Retail Chains ◽  
Polymeric Waste ◽  
Disposable Plastic

The increased use of disposable plastic consumer packaging, especially in the sanitary and epidemiological conditions of COVID-19, makes it necessary to dispose of the resulting waste. The problem is aggravated by the weak processing of waste, which is stored and not destroyed in nature. In this regard, the purpose of the article is to analyze the problems caused by the consumption and disposal of plastic disposable plastic packaging by retail chains and public catering companies. A brief comparative analysis of the composition and quantities of the plastic waste was carried out. The legal documents governing the waste management in Russia and abroad were studied. The Russian waste recycling market was compared with the foreign ones. Data on polymeric waste(composition, quantity, share in the total mass of waste, cost, and possibility of using as a secondary raw material) were studied. The lack of an effective system for collecting polymer waste and its utilization in Russia was emphasized and compared with Asian, European and American countries. In these countries, there are regulatory documents governing the collection and recycling of plastic products; the production itself is economically attractive. Recommendations aimed to encourage manufacturers to recycle waste were given; options for solving the problem of recycling plastic waste on a legislative, economic and managerial basis were offered.

Bio-based polyamide

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Medhat S. Farahat Khedr
Keyword(s):  
Atmospheric Carbon Dioxide ◽  
Chemical Properties ◽  
Carbon Dioxide Concentration ◽  
Polymeric Materials ◽  
Waste Recycling ◽  
Global Market ◽  
Published Data ◽  
Low Carbon ◽  
Polymer Waste ◽  
Biomass Feedstocks

Abstract Biobased polymers are sustainable polymers produced from renewable resources such as biomass feedstocks instead of the industrial fossil resources such as petroleum and natural gases. This trend helps in creating an environmentally friendly chemical processing that is characterized by low carbon footprint emission to the globe which in turn will limit the increase of the atmospheric carbon dioxide concentration even after their incineration. Synthesis of polymeric materials from biobased resources also solves the problem of polymer waste recycling. This chapter covers a basic background on the origin and importance of biobased polyamides, different synthetic routes of their starting monomeric materials obtained from biomass feedstocks, and a brief summary of the physical and chemical properties and applications of some common aliphatic, semiaromatic and fully aromatic polyamides. This chapter ends with a recent published data on the growth of the global market of biobased polyamides to emphasize on the economic importance of this manufacturing trend.

Technologies for the Recycling of Polymer Waste at Coking Plants

2021 ◽  
Vol 25 (1) ◽  
pp. 9-13
Author(s):  
R.R. Gimaletdinov ◽  
M.R. Usmanov ◽  
S.F. Valeev ◽  
F.R. Zainullov ◽  
A.V. Sulimov
Keyword(s):  
Thermal Destruction ◽  
Polymeric Materials ◽  
Raw Material ◽  
Household Waste ◽  
Quantitative Composition ◽  
Polymer Waste ◽  
Polymeric Waste ◽  
Inorganic Components ◽  
Comprehensive Study

The results of a comprehensive study of the process of thermal destruction of household waste and industrial polymeric materials in a mixture with petroleum feedstock at a pilot coking unit are presented. A mixture containing polyethylene, polypropylene, polystyrene and polyethylene terephthalate was used as household polymeric waste. Industrial waste was represented by a mixture of polyethylene and polypropylene. The qualitative and quantitative composition of the resulting products was investigated. It is shown that the involvement of polymer waste in an amount of up to 8% by weight in the raw material of the coking plant will make it possible to efficiently process polymer waste without changing the technological regime and quality of the products obtained. It has been established that the impurities of inorganic components present in the polymer raw material do not affect the coking process.

Current options for characterizing, sorting, and recycling polymeric waste

2020 ◽  
Vol 36 (4) ◽  
pp. 284-303 ◽  
Author(s):  
Daniel José da Silva ◽  
Hélio Wiebeck
Keyword(s):  
Industrial Sector ◽  
Waste Recycling ◽  
Chemical Recycling ◽  
Waste Generation ◽  
Polymer Waste ◽  
Polymer Recycling ◽  
Concise Review ◽  
Depth Analysis ◽  
Current Scenario ◽  
Polymeric Waste

Several researches and technologies on polymer recycling have been driven and justified by the uncontrolled and crescent polymer waste generation in the world. Herein, a critical and concise review on the recent and well-established recycling practices for polymer waste is presented, taking into account not only thermoplastics (or plastics) but also thermosets and elastomers. Moreover, sorting and characterization techniques for polymer waste recycling are detailed and their importance is discussed. An in-depth analysis of the literature indicated that novel and advanced recycling methods for polymeric waste (PW) present difficulties to be applied in the industrial sector, mainly the scientific innovations in the chemical recycling area. In the current scenario, new challenges for the recycling sector are linked to highly contaminated PW from electrical, electronic, and medical products.

European experience in transition to circular economy

2020 ◽  
Vol 19 (4) ◽  
pp. 598-617 ◽  
Author(s):  
S.V. Ratner
Keyword(s):  
European Union ◽  
Circular Economy ◽  
Raw Materials ◽  
Action Plan ◽  
National Level ◽  
The European Union ◽  
Scientific Methods ◽  
European Experience ◽  
General Scientific ◽  
The Eu

Subject. The article considers the concept of circular economy, which has originated relatively recently in the academic literature, and is now increasingly recognized in many countries at the national level. In the European Union, the transition to circular economy is viewed as an opportunity to improve competitiveness of the European Union, protect businesses from resource shortages and fluctuating prices for raw materials and supplies, and a way to increase employment and innovation. Objectives. The aim of the study is to analyze the incentives developed by the European Commission for moving to circular economy, and to assess their effectiveness on the basis of statistical analysis. Methods. I employ general scientific methods of research. Results. The analysis of the EU Action Plan for the Circular Economy enabled to conclude that the results of the recent research in circular economy barriers, eco-innovation, technology and infrastructure were successfully integrated into the framework of this document. Understanding the root causes holding back the circular economy development and the balanced combination of economic and administrative incentives strengthened the Action Plan, and it contributed to the circular economy development in the EU. Conclusions. The measures to stimulate the development of the circular economy proposed in the European Action Plan can be viewed as a prototype for designing similar strategies in other countries, including Russia. Meanwhile, a more detailed analysis of barriers to the circular economy at the level of individual countries and regions is needed.

scholarly journals Circular Bioeconomy Business Models to Overcome the Valley of Death. A Systematic Statistical Analysis of Studies and Projects in Emerging Bio-Based Technologies and Trends Linked to the SME Instrument Support

2021 ◽  
Vol 13 (4) ◽  
pp. 1899
Author(s):  
Fabiana Gatto ◽  
Ilaria Re
Keyword(s):  
Circular Economy ◽  
Success Factors ◽  
Business Models ◽  
Raw Materials ◽  
Action Plan ◽  
Future Perspective ◽  
The European Union ◽  
Strategic Orientations ◽  
Start Ups ◽  
Valley Of Death

Reducing the environmental pressure along the products life cycle, increasing efficiency in the consumption of resources and use of renewable raw materials, and shifting the economic system toward a circular and a climate-neutral model represent the heart of the current macro-trends of the European Union (EU) policy agendas. The circular economy and bioeconomy concepts introduced in the EU’s Circular Economy Action Plan and the Bioeconomy Strategy support innovation in rethinking economic systems focusing on market uptaking of greener solutions based on less-intensive resource consumption. In recent decades, industrial research has devoted enormous investments to demonstrate sustainable circular bio-based business models capable of overcoming the “Valley of Death” through alternative strategic orientations of “technological-push” and “market-pull”. The study highlights industrial research’s evolution on bio-based circular business model validation, trends, and topics with particular attention to the empowering capacity of start-ups and small and medium-sized enterprises (SMEs) to close the loops in renewable biological use and reduce dependence on fossil fuels. The research methodology involves a bibliographic search based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) approach and the European Innovation Council (EIC) Accelerator Data Hub investigation to understand SMEs’ key success factors and start-ups of the circular bioeconomy sector. Eco and bio-based materials, nutraceuticals, and microalgae represent the most sustainable industry applications, leading to circular bioeconomy business models’ future perspective.

scholarly journals A Review of Bioplastics and Their Adoption in the Circular Economy

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1229
Author(s):  
Alberto Di Bartolo ◽  
Giulia Infurna ◽  
Nadka Tzankova Dintcheva
Keyword(s):  
European Union ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
European Commission ◽  
Circular Economy ◽  
Environmental Risks ◽  
Plastic Waste ◽  
The European Union ◽  
Sustainable Society ◽  
Net Zero

The European Union is working towards the 2050 net-zero emissions goal and tackling the ever-growing environmental and sustainability crisis by implementing the European Green Deal. The shift towards a more sustainable society is intertwined with the production, use, and disposal of plastic in the European economy. Emissions generated by plastic production, plastic waste, littering and leakage in nature, insufficient recycling, are some of the issues addressed by the European Commission. Adoption of bioplastics–plastics that are biodegradable, bio-based, or both–is under assessment as one way to decouple society from the use of fossil resources, and to mitigate specific environmental risks related to plastic waste. In this work, we aim at reviewing the field of bioplastics, including standards and life cycle assessment studies, and discuss some of the challenges that can be currently identified with the adoption of these materials.

scholarly journals Towards a Circular Economy Taxation Framework: Expectations and Challenges of Implementation

2021 ◽  
Author(s):  
Leonidas Milios
Keyword(s):  
Circular Economy ◽  
Action Plan ◽  
Policy Instruments ◽  
Policy Instrument ◽  
Detailed Examination ◽  
Raw Material ◽  
The European Union ◽  
Material Resource ◽  
Waste Hierarchy ◽  
Tax Relief

AbstractThe transition to a circular economy is a complex process requiring wide multi-level and multi-stakeholder engagement and can be facilitated by appropriate policy interventions. Taking stock of the importance of a well-balanced policy mix that includes a variety of complementing policy instruments, the circular economy action plan of the European Union (COM(2020) 98 final) includes a section about “getting the economics right” in which it encourages the application of economic instruments. This contribution presents a comprehensive taxation framework, applied across the life cycle of products. The framework includes (1) a raw material resource tax, (2) reuse/repair tax relief, and (3) a waste hierarchy tax at the end of life of products. The research is based on a mixed method approach, using different sources to analyse the different measures in the framework. More mature concepts, such as material resource taxes, are analysed by reviewing the existing literature. The analysis of tax relief on repairs is based on interviews with stakeholders in Sweden, where this economic policy instrument has been implemented since 2017. Finally, for the waste hierarchy tax, which is a novel proposition in this contribution, macroeconomic modelling is used to analyse potential impacts of future implementation. In all cases, several implementation challenges are identified, and potential solutions are discussed according to literature and empirical sources. Further research is required both at the individual instrument and at the framework level. Each of the tax proposals needs a more detailed examination for its specificities of implementation, following the results of this study.

scholarly journals Towards Circular Economy—A Comparative Analysis of the Countries of the European Union

Resources ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 49
Author(s):  
Ewa Mazur-Wierzbicka
Keyword(s):  
European Union ◽  
Comparative Analysis ◽  
Circular Economy ◽  
Spatial Differentiation ◽  
The European Union ◽  
Main Research ◽  
Eu Countries ◽  
Population Member ◽  
Research Population

There are many studies which implement and assess existing measurement manners and document the progress of entities towards the circular economy (CE) at various levels, or present or propose new possibilities of measurement. The majority of them refer to the micro level. The aim of this paper is to conduct a multidimensional comparative analysis of the implementation of circular economy by EU countries. After an in-depth critical analysis of the literature, CE indicators which were proposed by the European Commission were adopted as a basis. Owing to the research population-Member States of the European Union (EU-28), focusing on the said indicators was declared reasonable in all aspects. The classification of EU countries according to the level of their advancement in the concept of CE was adopted as a main research task. In order to do so, a relevant index of development of circular economy was created (IDCE). This will allow us, inter alia, to trace changes in the spatial differentiation of advancement of the EU countries in implementing CE over the years, to identify CE implementation leaders as well as countries particularly delayed in this regard. The comparative analysis was conducted by means of statistical methods. On the basis of the analyses, it was concluded that among all EU countries, those of the old EU are the most advanced in terms of CE. The analysis confirmed significant rising trends for IDCE only in the case of Belgium and The Netherlands.

Sign in / Sign up

Export Citation Format

Share Document