scholarly journals Synthesis and Characterization of Lithium-Ion Conductive LATP-LaPO4 Composites Using La2O3 Nano-Powder

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3502
Author(s):  
Fangzhou Song ◽  
Masayoshi Uematsu ◽  
Takeshi Yabutsuka ◽  
Takeshi Yao ◽  
Shigeomi Takai
Keyword(s):  
Room Temperature ◽  
Conduction Mechanism ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Nano Powder ◽  
Powder Addition

LATP-based composite electrolytes were prepared by sintering the mixtures of LATP precursor and La2O3 nano-powder. Powder X-ray diffraction and scanning electron microscopy suggest that La2O3 can react with LATP during sintering to form fine LaPO4 particles that are dispersed in the LATP matrix. The room temperature conductivity initially increases with La2O3 nano-powder addition showing the maximum of 0.69 mS∙cm−1 at 6 wt.%, above which, conductivity decreases with the introduction of La2O3. The activation energy of conductivity is not largely varied with the La2O3 content, suggesting that the conduction mechanism is essentially preserved despite LaPO4 dispersion. In comparison with the previously reported LATP-LLTO system, although some unidentified impurity slightly reduces the conductivity maximum, the fine dispersion of LaPO4 particles can be achieved in the LATP–La2O3 system.

Structure and Conductivity of Iodine-Doped C60 Thin Films

1994 ◽  
Vol 359 ◽  
Author(s):  
Jun Chen ◽  
Haiyan Zhang ◽  
Baoqiong Chen ◽  
Shaoqi Peng ◽  
Ning Ke ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Room Temperature ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Thermally Activated ◽  
Order Of Magnitude

ABSTRACTWe report here the results of our study on the properties of iodine-doped C60 thin films by IR and optical absorption, X-ray diffraction, and electrical conductivity measurements. The results show that there is no apparent structural change in the iodine-doped samples at room temperature in comparison with that of the undoped films. However, in the electrical conductivity measurements, an increase of more that one order of magnitude in the room temperature conductivity has been observed in the iodine-doped samples. In addition, while the conductivity of the undoped films shows thermally activated temperature dependence, the conductivity of the iodine-doped films was found to be constant over a fairly wide temperature range (from 20°C to 70°C) exhibiting a metallic feature.

Intercalation of Acceptors and Donors in Highly Ordered Graphite Fibers

1982 ◽  
Vol 20 ◽  
Author(s):  
T.C. Chieu ◽  
G. Timp ◽  
M.S. Dresselhaus
Keyword(s):  
Raman Spectroscopy ◽  
Room Temperature ◽  
Skin Depth ◽  
X Ray Diffraction ◽  
Repeat Distance ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Order Of Magnitude ◽  
Graphite Fibers

ABSTRACTThe intercalation of various acceptors and donors into graphite fibers, prepared from benzene-derived precursor materials is investigated by Raman spectroscopy, x-ray diffraction, electron diffraction, lattice fringing, and electrical resistivity measurements. Evidence for formation of well-staged acceptor compounds is provided by Debye-Scherrer x-ray diffraction which probes the bulk fiber and by Raman spectroscopy which probes an optical skin depth (< 0.1 μm). Lattice fringing measurements provide direct observation of large regions (up to 50 Aring; × 400 Aring;) of defectfree single-staged regions. Values for the c-axis repeat distance Ic are obtained by indexing (00l) lines of the x-ray diffraction pattern. Raman results show characteristic upshifted modes for stage 1 acceptor compounds with a sharpening in linewidth as compared to the E2g2 mode of the pristine fiber. The room temperature electrical conductivity is increased about an order of magnitude upon intercalation and exhibits a metallic dependence on temperature. The highest air-stable room temperature conductivity 1.4 × 105 (Ω-cm)−l ever reported for an intercalated fiber has been achieved.

scholarly journals MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

2000 ◽  
Vol 5 (S1) ◽  
pp. 412-424
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

We report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

scholarly journals Metal-Rich Metallaboranes: Synthesis, Structures and Bonding of Bi- and Trimetallic Open-Faced Cobaltaboranes

Inorganics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 28
Author(s):  
Kriti Pathak ◽  
Chandan Nandi ◽  
Jean-François Halet ◽  
Sundargopal Ghosh
Keyword(s):  
Electronic Structures ◽  
Density Functional ◽  
Room Temperature ◽  
Electron Pair ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Cluster 2 ◽  
Cobalt Center

Synthesis, isolation, and structural characterization of unique metal rich diamagnetic cobaltaborane clusters are reported. They were obtained from reactions of monoborane as well as modified borohydride reagents with cobalt sources. For example, the reaction of [Cp*CoCl]2 with [LiBH4·THF] and subsequent photolysis with excess [BH3·THF] (THF = tetrahydrofuran) at room temperature afforded the 11-vertex tricobaltaborane nido-[(Cp*Co)3B8H10] (1, Cp* = η5-C5Me5). The reaction of Li[BH2S3] with the dicobaltaoctaborane(12) [(Cp*Co)2B6H10] yielded the 10-vertex nido-2,4-[(Cp*Co)2B8H12] cluster (2), extending the library of dicobaltadecaborane(14) analogues. Although cluster 1 adopts a classical 11-vertex-nido-geometry with one cobalt center and four boron atoms forming the open pentagonal face, it disobeys the Polyhedral Skeletal Electron Pair Theory (PSEPT). Compound 2 adopts a perfectly symmetrical 10-vertex-nido framework with a plane of symmetry bisecting the basal boron plane resulting in two {CoB3} units bridged at the base by two boron atoms and possesses the expected electron count. Both compounds were characterized in solution by multinuclear NMR and IR spectroscopies and by mass spectrometry. Single-crystal X-ray diffraction analyses confirmed the structures of the compounds. Additionally, density functional theory (DFT) calculations were performed in order to study and interpret the nature of bonding and electronic structures of these complexes.

Synthesis and Characterization of ZIF-8 Mixed Matrix Membranes

2014 ◽  
Vol 625 ◽  
pp. 661-664
Author(s):  
Chen Chuang Lok ◽  
Yin Fong Yeong
Keyword(s):  
Room Temperature ◽  
Synthesis Method ◽  
Mixed Matrix Membranes ◽  
Inorganic Filler ◽  
X Ray Diffraction ◽  
Mixed Matrix ◽  
Temperature Synthesis ◽  
X Ray ◽  
Matrix Membranes

In the present work, ZIF-8/6FDA-durene mixed matrix membranes (MMMs) were synthesized and characterized. ZIF-8 nanocrystals, which were used as the inorganic filler, were synthesized using rapid room-temperature synthesis method whereas 6FDA-durene polyimide was synthesized by polycondensation method followed by chemical imidization. Pure and 6FDA-durene membranes loaded with 5 wt%, 10 wt% and 15 wt% of ZIF-8 were fabricated. The structural properties and morphology of the resultant membranes were characterized by using X-ray Diffraction (XRD) and Field emission scanning electron microscope (FESEM) . The EDX images showed that ZIF-8 particles agglomerated in the polymer matrix. However, no phase separation was observed for all resultant MMMs.

Growth mechanism and characterization of ZnO nano-tubes synthesized using the hydrothermal-etching method

2009 ◽  
Vol 63 (6) ◽  
Author(s):  
Yan Li ◽  
Chuan-Sheng Liu ◽  
Yun-Ling Zou
Keyword(s):  
Room Temperature ◽  
Morphological Analysis ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Etching Method ◽  
Nano Rods ◽  
Two Stages

AbstractZnO nano-tubes (ZNTs) have been successfully synthesized via a simple hydrothermal-etching method, and characterized by X-ray diffraction, field emission scanning electron microscopy and room temperature photoluminescence measurement. The as-synthesized ZNTs have a diameter of 500 nm, wall thickness of 20–30 nm, and length of 5 µm. Intensity of the plane (0002) diffraction peak, compared with that of plane (10$$ \bar 1 $$0) of ZNTs, is obviously lower than that of ZnO nano-rods. This phenomenon can be caused by the smaller cross section of plane (0002) of the nano-tubes compared with that of other morphologies. On basis of the morphological analysis, the formation process of nano-tubes can be proposed in two stages: hydrothermal growth and reaction etching process.

scholarly journals Making and Characterization of Limnpo4 Using Solid State Reaction Method for Lithium Ion Battery Cathodes

2019 ◽  
pp. 583-588
Author(s):  
Adelyna Oktavia ◽  
Kurnia Sembiring ◽  
Slamet Priyono
Keyword(s):  
Solid State ◽  
Lithium Ion Battery ◽  
Lithium Ion ◽  
Solid State Reaction Method ◽  
Raw Material ◽  
X Ray Diffraction ◽  
Solid State Method ◽  
X Ray ◽  
General Investigation

Hospho-material of olivine, LiMnPO4 identified as promising for cathode material generation next Lithium-ion battery and has been successfully synthesized by solid-state method with Li2Co3, 2MnO2, 2NH4H2PO4 as raw material. The influence of initial concentration of precursors at kalsinasi temperatures (400-800 ° C) flows with nitrogen. The purity and composition phase verified by x-ray diffraction analysis (XRD), scanning electron microscopy (SEM), spectroscopy, energy Dispersive x-ray Analysis (EDS), Raman spectra. General investigation shows that there is a correlation between the concentration of precursors, the temperature and the temperature of sintering kalsinasi that can be exploited to design lithium-ion next generation.

Synthesis and characterization of MnO2nanowires

2017 ◽  
Vol 31 (02) ◽  
pp. 1750006 ◽  
Author(s):  
Mohammad Hossein Ghorbani ◽  
Abdol Mahmood Davarpanah
Keyword(s):  
Lithium Batteries ◽  
Manganese Oxides ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Sol Gel ◽  
Average Crystallite Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Xrd Method

Manganese oxides are of more interest to researchers because of their ability as catalysts and lithium batteries. In this research, MnO2nanowires with diameter about 45 nm were synthesized by sol–gel method at room temperature (RT). Effect of increasing the annealing temperature from 400[Formula: see text]C to 600[Formula: see text]C on crystalline structure of nanostructure were studied and average crystallite size was estimated about 22 nm. X-ray Diffraction (XRD) method, Energy-Dispersive X-ray Diffraction (EDXD), Scanning Electron Microscopy (SEM) and Vibrating Sample Magnetometer (VSM) were used to characterize the nanowires of MnO2.

MOVPE Growth of Quaternary (Al,Ga,In)N for UV Optoelectronics

1999 ◽  
Vol 595 ◽  
Author(s):  
Jung Han ◽  
Jeffrey J. Figiel ◽  
Gary A. Petersen ◽  
Samuel M. Myers ◽  
Mary H. Crawford ◽  
...  
Keyword(s):  
Room Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Optoelectronic Devices ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peak Energy ◽  
Movpe Growth ◽  
Pl Emission

AbstractWe report the growth and characterization of quaternary AlGaInN. A combination of photoluminescence (PL), high-resolution x-ray diffraction (XRD), and Rutherford backscattering spectrometry (RBS) characterizations enables us to explore the contours of constant- PL peak energy and lattice parameter as functions of the quaternary compositions. The observation of room temperature PL emission at 351nm (with 20% Al and 5% In) renders initial evidence that the quaternary could be used to provide confinement for GaInN (and possibly GaN). AlGaInN/GaInN MQW heterostructures have been grown; both XRD and PL measurements suggest the possibility of incorporating this quaternary into optoelectronic devices.

Biocompatible Hydroxyapatite Derive from Selayang Fish Bone via Mechanochemical Treatment

2020 ◽  
Vol 307 ◽  
pp. 339-344
Author(s):  
Ishak Qayyum Afiqah ◽  
Nik Aziz Nik Ali ◽  
Abd Majid Siti Nurhaziqah ◽  
Hasiah Salleh
Keyword(s):  
Room Temperature ◽  
Fish Bone ◽  
X Ray Diffraction ◽  
Synthetic Process ◽  
Calcination Process ◽  
Natural Sources ◽  
X Ray ◽  
Fish Bones ◽  
Phosphate Mineral

Age of monstrous amount of underutilized marine processing byproducts has been perceived as waste and many effort were given to utilize these materials in various application. With an incredible number of study on these byproducts, some compound were identified and apply for human utilization. Hydroxyapatite (HAp) is the main inorganic calcium phosphate mineral with excellent osteoconductivity, good bioactivity and biocompatibility. The production of HAp powder from synthetic process involves many chemicals with complicated procedures. Due to this matter, the raw HAp powder was extracted from natural sources selayang fish bones. Extortion process started with boiling fish bones to eliminate adherent fish meats. After calcination process fish bone were dried in room temperature before crushed by using grinder to obtain the powder. Next, the powder undergo calcination process at 900°C for 5 hours. The characterization of raw HAp was done via X-ray Diffraction, Fourier Transform Infrared Spectometer, Scanning Electron Microscopy, and Thermogravimetric analysis.

Sign in / Sign up

Export Citation Format

Share Document