scholarly journals Effects of the Water-Based Foaming Process on the Basic and Rheological Properties of Bitumen 70/100

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2803
Author(s):  
Marek Iwański ◽  
Anna Chomicz-Kowalska ◽  
Grzegorz Mazurek ◽  
Przemysław Buczyński ◽  
Małgorzata Cholewińska ◽  
...  
Keyword(s):  
Low Temperature ◽  
Cold Water ◽  
Model Parameters ◽  
Recycled Asphalt ◽  
Maximum Expansion ◽  
Foaming Process ◽  
Water Based ◽  
Before And After ◽  
2S2p1d Model ◽  
The Impact

The process of water-based foaming of bitumen produces binders that can be incorporated in cold recycled asphalt mixes and pavement upper structural layers made of half-warm mix asphalt prepared at 100–130 °C. During the foaming process, cold water and air act on hot bitumen (160–170 °C), which results in the explosive vaporization of water leading to changes in the binder structure. The impact of foaming on the properties of bitumen 70/100 was evaluated by investigating the binder characteristics before and after foaming. Determination of two foaming parameters, maximum expansion and half-life, was followed by measurements of penetration at 25 °C, softening point, Fraass breaking point, and dynamic viscosity at 60, 90, and 135 °C. Rheological and low-temperature tests were also performed before and after foaming bitumen 70/100. The Bending Beam Rheometer method was applied to determine the low temperature stiffness modulus. A DHR-2 rheometer was used to determine the dynamic modulus and phase angle of the tested binder. The Black and master curves before and after foaming were plotted in the 2S2P1D model and the model parameters were analysed. Analysis of the test results confirmed the effects of the foaming process on the basic, low-temperature, and rheological characteristics of the bitumen.

scholarly journals Effects of equal channel angular pressing and heat treatments on the microstructures and mechanical properties of selective laser melted and cast AlSi10Mg alloys

2021 ◽  
Vol 21 (3) ◽  
Author(s):  
Przemysław Snopiński ◽  
Mariusz Król ◽  
Marek Pagáč ◽  
Jana Petrů ◽  
Jiří Hajnyš ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Low Temperature ◽  
Equal Channel Angular Pressing ◽  
Heat Treatments ◽  
Electron Backscattered Diffraction ◽  
Angular Pressing ◽  
Low Temperature Annealing ◽  
Transmission Electron ◽  
Before And After ◽  
The Impact

AbstractThis study investigated the impact of the equal channel angular pressing (ECAP) combined with heat treatments on the microstructure and mechanical properties of AlSi10Mg alloys fabricated via selective laser melting (SLM) and gravity casting. Special attention was directed towards determining the effect of post-fabrication heat treatments on the microstructural evolution of AlSi10Mg alloy fabricated using two different routes. Three initial alloy conditions were considered prior to ECAP deformation: (1) as-cast in solution treated (T4) condition, (2) SLM in T4 condition, (3) SLM subjected to low-temperature annealing. Light microscopy, transmission electron microscopy, X-ray diffraction line broadening analysis, and electron backscattered diffraction analysis were used to characterize the microstructures before and after ECAP. The results indicated that SLM followed by low-temperature annealing led to superior mechanical properties, relative to the two other conditions. Microscopic analyses revealed that the partial-cellular structure contributed to strong work hardening. This behavior enhanced the material’s strength because of the enhanced accumulation of geometrically necessary dislocations during ECAP deformation.

scholarly journals Prediction of Secondary Organic Aerosol from the Multiphase Reaction of Gasoline Vapor by Using Volatility–Reactivity Base Lumping

2021 ◽  
Author(s):  
Sanghee Han ◽  
Myoseon Jang
Keyword(s):  
Secondary Organic Aerosol ◽  
Ambient Air ◽  
Organic Aerosol ◽  
Heterogeneous Reactions ◽  
Model Parameters ◽  
Phase Reaction ◽  
Atmospheric Aging ◽  
Gasoline Vapor ◽  
Before And After ◽  
The Impact

Abstract. The secondary organic aerosol (SOA) formation from photooxidation of gasoline vapor was simulated by using the UNIfied Partitioning Aerosol phase Reaction (UNIPAR) model, which predicted SOA growth via multiphase reactions of hydrocarbons. The Carbon Bond 6 (CB6r3) mechanism was incorporated with the SOA model to estimate the hydrocarbon consumption and the concentration of radicals (i.e., RO2 and HO2), which were closely related to atmospheric aging of gas products. Oxygenated products were lumped according to their volatilities and reactivity and linked to stoichiometric coefficients and their physicochemical parameters, which were dynamically constructed at different NOx levels and degrees of gas aging. To assess the gasoline SOA potential in ambient air, model parameters were corrected for gas–wall partitioning (GWP), which was predicted by a qualitative structure activity relationship for explicit products. The simulated gasoline SOA mass was evaluated against observed data obtained in the UF-APHOR chamber under ambient sunlight. The influence of environmental conditions on gasoline SOA was characterized under varying NOx levels, aerosol acidity, humidity, temperature, and concentrations of aqueous salts and gasoline vapor. Both the measured and simulated gasoline SOA formation was sensitive to seeded conditions (acidity and hygroscopicity) and NOx levels. A considerable difference in SOA mass appeared before and after efflorescence relative humidity in the presence of salted aqueous solution. SOA growth in the presence of aqueous reactions was more impacted by temperature than that in absence of seed. The impact of GWP on SOA formation was generally significant, and it appeared to be higher in the absence of wet salts. We conclude that the SOA model in the corpus with both heterogeneous reactions and the model parameters corrected for GWP is essential to accurately predict SOA mass in ambient air.

scholarly journals Towards the Use of Waste Pig Fat as a Novel Potential Bio-Based Rejuvenator for Recycled Asphalt Pavement

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 1002
Author(s):  
Nader Nciri ◽  
Taesub Shin ◽  
Namho Kim ◽  
Arnaud Caron ◽  
Hanen Ben Ismail ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Pavement ◽  
Fatigue Cracking ◽  
Recycled Asphalt ◽  
Excellent Thermal Stability ◽  
Temperature Performance ◽  
Aged Asphalt ◽  
Ft Ir ◽  
Low Temperature Performance ◽  
The Impact

This article presents a novel potential bio-based rejuvenator derived from waste pig fat (WPF) for use in recycled asphalt applications. To achieve this purpose, the impact of different doses waste pig fat (e.g., 0, 3, 6, and 9 wt.% WPF) on the reclaimed asphalt pavement binder (RAP-B) performance is investigated. The unmodified and WPF-modified asphalts are characterized by means of Fourier-transform infrared spectroscopy (FT-IR), thin-layer chromatography–flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Physico-rheological properties of asphalt blends are assessed through Brookfield viscometer, softening point, penetration, and dynamic shear rheometer (DSR) tests. TLC-FID data highlighted that incremental WPF addition into RAP-B restored its original balance maltenes-to-asphaltenes ratio; finding which was supported by FT-IR analysis. SEM disclosed that WPF has a great compatibility with the aged asphalt. AFM observations showed that grease treatment induced a decline in surface roughness (i.e., bee structures) and a rise in friction force (i.e., para-phase dimension) of RAP binder. TGA/DSC studies revealed that the bio-modifier not only possesses an excellent thermal stability but also can substantially enhance the binder low-temperature performance. Empirical and DSR tests demonstrated that WPF improved the low-temperature performance grade of RAP-B, reduced its mixing and compaction temperatures, and noticeably boosted its fatigue cracking resistance. The rejuvenation of aged asphalt employing WPF is feasible and can be an ideal approach to recycle both of RAP and waste pig fats.

Influence of Impurities on the Microstructure and Thermal Shock Resistance of YSZ Coatings

2017 ◽  
Vol 898 ◽  
pp. 1414-1423
Author(s):  
Yu Dao Wei ◽  
Yue Guang Yu ◽  
Xiao Juan Ji ◽  
Hao Ran Peng
Keyword(s):  
Thermal Shock ◽  
Thermal Shock Resistance ◽  
Cold Water ◽  
Energy Dispersive Spectrometer ◽  
Energy Dispersive ◽  
X Ray ◽  
Before And After ◽  
Shock Resistance ◽  
The Impact ◽  
Influence Of Impurities

The impact of impurities on the microstructure and thermal shock resistance of YSZ TBCs was investigated. ZrO2-7.5wt%Y2O3 (7.5YSZ) coatings of 5 spices of compositions (4 of them were doped with one type of impurity, namely, Al2O3, Fe2O3, SiO2 and TiO2, and the other was not doped) were manufactured by APS. Thermal shock tests of these TBCs were carried out at 1100 °C, and the samples were quenched in cold water in the temperature range from 20 to 25°C. The microstructure evolution and phase analysis were performed before and after the thermal shock tests by scanning electron microscope (SEM) and X-ray diffractometer (XRD). The results showed that the thermal shock lifetime of YSZ TBCs doped with impurities was obviously reduced compared to that of no-impurity TBCs. Additionally, the differences in the microstructure and phases of YSZ TBCs were ascertained and the elements distribution was tested by Energy Dispersive Spectrometer (EDS) and Energy Dispersive X-Ray Spectroscopy (EDX).

Strategic Role of Zakat in Multidimensional Quality of Life in Sijunjung, Indonesia

2018 ◽  
Vol 15 (1) ◽  
pp. 55-72
Author(s):  
Herlin Hamimi ◽  
Abdul Ghafar Ismail ◽  
Muhammad Hasbi Zaenal
Keyword(s):  
Quality Of Life ◽  
Positive Impact ◽  
Wealth Distribution ◽  
Absolute Poverty ◽  
Before And After ◽  
The Status ◽  
Being There ◽  
The Impact

Zakat is one of the five pillars of Islam which has a function of faith, social and economic functions. Muslims who can pay zakat are required to give at least 2.5 per cent of their wealth. The problem of poverty prevalent in disadvantaged regions because of the difficulty of access to information and communication led to a gap that is so high in wealth and resources. The instrument of zakat provides a paradigm in the achievement of equitable wealth distribution and healthy circulation. Zakat potentially offers a better life and improves the quality of human being. There is a human quality improvement not only in economic terms but also in spiritual terms such as improving religiousity. This study aims to examine the role of zakat to alleviate humanitarian issues in disadvantaged regions such as Sijunjung, one of zakat beneficiaries and impoverished areas in Indonesia. The researcher attempted a Cibest method to capture the impact of zakat beneficiaries before and after becoming a member of Zakat Community Development (ZCD) Program in material and spiritual value. The overall analysis shows that zakat has a positive impact on disadvantaged regions development and enhance the quality of life of the community. There is an improvement in the average of mustahik household incomes after becoming a member of ZCD Program. Cibest model demonstrates that material, spiritual, and absolute poverty index decreased by 10, 5, and 6 per cent. Meanwhile, the welfare index is increased by 21 per cent. These findings have significant implications for developing the quality of life in disadvantaged regions in Sijunjung. Therefore, zakat is one of the instruments to change the status of disadvantaged areas to be equivalent to other areas.

Estimating OLED Display Device Lifetime from pixel and screen brightness and its application

2019 ◽  
Vol 2019 (1) ◽  
pp. 331-338 ◽  
Author(s):  
Jérémie Gerhardt ◽  
Michael E. Miller ◽  
Hyunjin Yoo ◽  
Tara Akhavan
Keyword(s):  
Image Processing ◽  
Power Consumption ◽  
Model Parameters ◽  
Display Device ◽  
Image Processing Algorithm ◽  
Pixel Value ◽  
Device Lifetime ◽  
The Impact ◽  
Oled Display

In this paper we discuss a model to estimate the power consumption and lifetime (LT) of an OLED display based on its pixel value and the brightness setting of the screen (scbr). This model is used to illustrate the effect of OLED aging on display color characteristics. Model parameters are based on power consumption measurement of a given display for a number of pixel and scbr combinations. OLED LT is often given for the most stressful display operating situation, i.e. white image at maximum scbr, but having the ability to predict the LT for other configurations can be meaningful to estimate the impact and quality of new image processing algorithms. After explaining our model we present a use case to illustrate how we use it to evaluate the impact of an image processing algorithm for brightness adaptation.

ANALISIS PENGARUH PEMBANGUNAN JALAN LAYANG JANTI TERHADAP PERKEMBANGAN TATA RUANG KAWASAN JANTI STUDI KASUS : KAWASAN JANTI, DESA CATURTUNGGAL, KABUPATEN SLEMAN, D. I. YOGYAKARTA

2017 ◽  
Vol 11 (3) ◽  
pp. 255
Author(s):  
Jeky El Boru
Keyword(s):  
Road Network ◽  
Open Space ◽  
Qualitative Description ◽  
Analysis Method ◽  
Open Spaces ◽  
The Road ◽  
Before And After ◽  
Linkage Method ◽  
The Impact ◽  
Parking Place

Abstract: This research aims to analyze the impact of Janti Flyover Construction toward the growth of layout at Janti Urban Area, including structured space, open space, and linkage. Method used for data collecting are observation, air photograph monitoring, and interview, whereas the analysis method is qualitative description, which is the superimposed method of two layers, that are the layout condition before and after flyover construction. The result shows that the impact of Janti Flyover construction can be seen on building mass (solid), the increasing number of open spaces, including the road network, parking place, and park, whereas the relation between spaces, visually and structurally, can be seen on the growth of buildings which have new shapes and styles, therefore the performance of the overall building does not have a proportional shape. Considering Janti Street at the collective relation, its role is getting stronger as the main frame road network.Keywords: Flyover construction, layout changing, Janti AreaAbstrak: Penelitian ini bertujuan untuk menganalisis pengaruh pembangunan Jalan Layang Janti terhadap perkembangan tata ruang Kawasan Janti, meliputi ruang terbangun, ruang terbuka, serta hubungan antar ruang (“linkage”). Metode pengumpulan data dilakukan melalui observasi, pengamatan foto udara, dan wawancara; sedangkan metode analisis melalui deskripsi secara kualitatif yang berupa “superimposed method” dari dua lapisan kondisi lahan, yakni kondisi tata ruang sebelum dan sesudah pembangunan jalan layang. Hasil penelitian menunjukkan bahwa pengaruh pembangunan Jalan Layang Janti terdapat pada massa bangunan (“solid”), pertambahan ruang terbuka yang berupa jaringan jalan, parkir, dan taman; sedangkan pada hubungan antar ruang ̶ secara visual dan struktural ̶ yakni tumbuhnya bangunan dengan bentuk dan gaya baru, sehingga bentuk tampilan bangunan secara keseluruhan tidak proporsional. Pada hubungan kolektif, Jalan Janti semakin kuat perannya sebagai kerangka utama jaringan jalan.Kata kunci : Pembangunan jalan layang, tata ruang, Kawasan Janti

Impact of merger on efficiency and productivity : a case study of commercial banks in Malaysia

1970 ◽  
Vol 5 (1) ◽  
pp. 77
Author(s):  
Mahadzir Ismail ◽  
Saliza Sulaiman ◽  
Hasni Abdul Rahim ◽  
Nordiana Nordin
Keyword(s):  
Efficiency Score ◽  
Malmquist Productivity Index ◽  
Productivity Index ◽  
Data Envelopment ◽  
Master Plan ◽  
Before And After ◽  
Domestic Banks ◽  
The Impact ◽  
Efficiency And Productivity

The Financial Master Plan (2001- 2010) aims to enhance the capacity of banking industry so that higher effic iency and productivity can be reaped in the future. This study seeks to determine the impact of merger on the efficiency and productivity ofcommercial banks in Malaysia for the period 1995 until 2005. The study uses a non-parametric approach, nam ely DEA (data envelopment analysis?) to estimate the efficiency scores and to construct the Malmquist productivity index. To enable this estimation, three bank inputs and outputs are used. Amongst the findings are those banks exhibit higher efficiency score after the merger and thefo reign banks are more efficient than the local banks. Productivity of the banks is calculated in both periods, before and after the merger: The results show that, it is the local banks that have improved the most after the merger. The main source of productivity is technical change or innovation. The findings support the existing policy of having larger domestic banks in term of size.

THE EFFECT OF METACOGNITIVE INSTRUCTION ON MAXIMIZING EFL LEARNERS’ METACOGNITIVE AWARENESS IN LISTENING

2018 ◽  
Vol 7 (1) ◽  
pp. 8-17
Author(s):  
Mahsa Assadi
Keyword(s):  
Experimental Research ◽  
Listening Comprehension ◽  
Intervention Program ◽  
Metacognitive Awareness ◽  
Listening Test ◽  
Efl Learners ◽  
Metacognitive Instruction ◽  
Before And After ◽  
Comprehension Ability ◽  
The Impact

This study reports a pre-experimental research on the impact of metacognitive instruction on EFL learners’ metacognitive awareness and their listening performance. To obtain the goal of the study, a group of 30 Iranian intermediate EFL learners, including 14 males and 16 females, were selected randomly. Their ages range from 20 to 24. The participants took part in 16 weeks’ intervention program based on metacognitive pedagogical sequence consisted of five stages. The metacognitive awareness listening questionnaire (MALQ), and a listening test were also used to find changes in metacognitive awareness and listening performance before and after the treatment. The results of comparing pre and posttests scores revealed that metacognitive instruction raised the learners’ metacognitive awareness and helped them improve their listening comprehension ability.

Sign in / Sign up

Export Citation Format

Share Document