scholarly journals Synthesis and Characterization of Electrospun Composite Scaffolds Based on Chitosan-Carboxylated Graphene Oxide with Potential Biomedical Applications

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2535
Author(s):  
Elena Cojocaru ◽  
Jana Ghitman ◽  
Elena Iuliana Biru ◽  
Gratiela Gradisteanu Pircalabioru ◽  
Eugeniu Vasile ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Cellular Proliferation ◽  
Biological Properties ◽  
Synthesis Process ◽  
Composite Scaffolds ◽  
Angle Measurements ◽  
Nanofibrous Scaffolds ◽  
Contact Angle Measurements ◽  
Poly Ethylene

This research study reports the development of chitosan/carboxylated graphene oxide (CS/GO-COOH) composite scaffolds with nanofibrous architecture using the electrospinning method. The concept of designed composite fibrous material is based on bringing together the biological properties of CS, mechanical, electrical, and biological characteristics of GO-COOH with the versatility and efficiency of ultra-modern electrospinning techniques. Three different concentrations of GO-COOH were added into a chitosan (CS)-poly(ethylene oxide) (PEO) solution (the ratio between CS/PEO was 3/7 (w/w)) and were used in the synthesis process of composite scaffolds. The effect of GO-COOH concentration on the spinnability, morphological and mechanical features, wettability, and biological properties of engineered fibrous scaffolds was thoroughly investigated. FTIR results revealed the non-covalent and covalent interactions that could take place between the system’s components. The SEM micrographs highlighted the nanofibrous architecture of scaffolds, and the presence of GO-COOH sheets along the composite CS/GO-COOH nanofibers. The size distribution graphs showed a decreasing trend in the mean diameter of composite nanofibers with the increase in GO-COOH content, from 141.40 nm for CS/PG 0.1% to 119.88 nm for CS/PG 0.5%. The dispersion of GO-COOH led to composite scaffolds with increased elasticity; the Young’s modulus of CS/PG 0.5% (84 ± 4.71 MPa) was 7.5-fold lower as compared to CS/PEO (662 ± 15.18 MPa, p < 0.0001). Contact angle measurements showed that both GO-COOH content and crosslinking step influenced the surface wettability of scaffolds, leading to materials with ~1.25-fold higher hydrophobicity. The in vitro cytocompatibility assessment showed that the designed nanofibrous scaffolds showed a reasonable cellular proliferation level after 72 h of contact with the fibroblast cells.

Surface Modification of Copolyether-Urethane Catheters with Poly(Ethylene Oxide)

1989 ◽  
Vol 12 (6) ◽  
pp. 390-394 ◽  
Author(s):  
E. Brinkman ◽  
A. Poot ◽  
T. Beugeling ◽  
L. Van Der Does ◽  
A. Bantjes
Keyword(s):  
Surface Modification ◽  
Ethylene Oxide ◽  
Blood Compatibility ◽  
Angle Measurements ◽  
Fold Reduction ◽  
Contact Angle Measurements ◽  
Platelet Deposition ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene

Pellethane 2363 80A catheters were modified with poly(ethylene oxide) in order to improve their blood compatibility. Contact angle measurements showed that Pellethane 2363 80A surfaces had increased wettability after this modification. The results of in vitro blood compatibility tests showed that surface modification with poly(ethylene oxide) resulted in a five-fold reduction of platelet deposition. Activation of coagulation was not affected.

Surface Wettability Enhances Osteoblast Adhesion on Silicon-Substituted Hydroxyapatite Thin Films

2007 ◽  
Vol 330-332 ◽  
pp. 877-880 ◽  
Author(s):  
E.S. Thian ◽  
J. Huang ◽  
Serena Best ◽  
Zoe H. Barber ◽  
William Bonfield
Keyword(s):  
Thin Films ◽  
Contact Angle ◽  
Actin Filaments ◽  
Culture Study ◽  
Cell Culture Study ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Osteoblast Adhesion ◽  
Lower Contact

Crystalline hydroxyapatite (HA) and 0.8 wt.% silicon-substituted HA (SiHA) thin films were produced using magnetron co-sputtering. These films were subjected to contact angle measurements and in vitro cell culture study using human osteoblast-like (HOB) cells. A wettability study showed that SiHA has a lower contact angle, and thus is more hydrophilic in nature, as compared to HA. Consequently, enhanced cell growth was observed on SiHA at all time-points. Furthermore, distinct and well-developed actin filaments could be seen within HOB cells on SiHA. Thus, this work demonstrated that the surface properties of the coating may be modified by the substitution of Si into the HA structure.

scholarly journals Graphene Oxide Oxygen Content Affects Physical and Biological Properties of Scaffolds Based on Chitosan/Graphene Oxide Conjugates

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1142 ◽  
Author(s):  
Iolanda Francolini ◽  
Elena Perugini ◽  
Ilaria Silvestro ◽  
Mariangela Lopreiato ◽  
Anna Scotto d’Abusco ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Mechanical Strength ◽  
Oxygen Content ◽  
Mechanical Stability ◽  
Biological Properties ◽  
Dermal Fibroblasts ◽  
Porous Scaffolds ◽  
Low Oxygen ◽  
Interdisciplinary Field

Tissue engineering is a highly interdisciplinary field of medicine aiming at regenerating damaged tissues by combining cells with porous scaffolds materials. Scaffolds are templates for tissue regeneration and should ensure suitable cell adhesion and mechanical stability throughout the application period. Chitosan (CS) is a biocompatible polymer highly investigated for scaffold preparation but suffers from poor mechanical strength. In this study, graphene oxide (GO) was conjugated to chitosan at two weight ratios 0.3% and 1%, and the resulting conjugates were used to prepare composite scaffolds with improved mechanical strength. To study the effect of GO oxidation degree on scaffold mechanical and biological properties, GO samples at two different oxygen contents were employed. The obtained GO/CS scaffolds were highly porous and showed good swelling in water, though to a lesser extent than pure CS scaffold. In contrast, GO increased scaffold thermal stability and mechanical strength with respect to pure CS, especially when the GO at low oxygen content was used. The scaffold in vitro cytocompatibility using human primary dermal fibroblasts was also affected by the type of used GO. Specifically, the GO with less content of oxygen provided the scaffold with the best biocompatibility.

scholarly journals Gradient Chitosan Hydrogels Modified with Graphene Derivatives and Hydroxyapatite: Physiochemical Properties and Initial Cytocompatibility Evaluation

2020 ◽  
Vol 21 (14) ◽  
pp. 4888
Author(s):  
Karolina Kosowska ◽  
Patrycja Domalik-Pyzik ◽  
Małgorzata Sekuła-Stryjewska ◽  
Sylwia Noga ◽  
Joanna Jagiełło ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Mechanical Analysis ◽  
Biological Properties ◽  
Human Umbilical Cord ◽  
Tissue Engineering Scaffolds ◽  
X Ray ◽  
Chitosan Matrix ◽  
Graphene Derivatives

In this study, we investigated preparation of gradient chitosan-matrix hydrogels through a novel freezing–gelling–thawing method. The influence of three types of graphene family materials (GFM), i.e., graphene oxide (GO), reduced graphene oxide (rGO), and poly(ethylene glycol) grafted graphene oxide (GO-PEG), as well as hydroxyapatite (HAp) on the physicochemical and biological properties of the composite hydrogels was examined in view of their potential applicability as tissue engineering scaffolds. The substrates and the hydrogel samples were thoroughly characterized by X-ray photoelectron spectroscopy, X-ray diffractometry, infrared spectroscopy, digital and scanning electron microscopy, rheological and mechanical analysis, in vitro chemical stability and bioactivity assays, as well as initial cytocompatibility evaluation with human umbilical cord Wharton’s jelly mesenchymal stem cells (hUC-MSCs). We followed the green-chemistry approach and avoided toxic cross-linking agents, using instead specific interactions of our polymer matrix with tannic acid, non-toxic physical cross-linker, and graphene derivatives. It was shown that the most promising are the gradient hydrogels modified with GO-PEG and HAp.

scholarly journals Dextran Grafted Silicon Substrates: Preparation, Characterization And Biomedical Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Michela Ombelli ◽  
David M. Eckmann ◽  
Russell J. Composto
Keyword(s):  
Protein Interactions ◽  
Chemical Characterization ◽  
Biological Properties ◽  
Silicon Substrates ◽  
Molecular Weight Range ◽  
Angle Measurements ◽  
Surface Analysis Techniques ◽  
Embolism And Thrombosis ◽  
Contact Angle Measurements ◽  
Molecular Aspects

AbstractBiodevices used in the cardiovascular system suffer from well-known problems associated with surface-induced gas embolism and thrombosis. In order to improve the biocompatibility of these devices, biomimetic coatings show good promise. We recently synthesized a coating layer of dextran, a relatively simple and well characterized neutral polysaccharide, with the purpose of mimicking the cells' glycocalyx layer, that prevents non-specific cells-protein interactions. Systematic physical chemical characterization was performed on coatings obtained both from commonly used polydisperse dextrans and low-dispersity dextrans in the 1-100 kDalton molecular weight range.We have combined standard surface analysis techniques, such as ellipsometry, contact angle measurements and AFM, with less traditional vibrational spectroscopy techniques in the characterization of our biomimetic coatings. FTIR, micro-FTIR and micro-Raman spectroscopies were utilized to correlate the conformational and molecular aspects of the grafted poly- and monodisperse dextran chains to their attractive biological properties.

The Synthesis and Initial Studying Anticoagulant Property of O-Doped DLC Films by DC-MFCVAD

2007 ◽  
Vol 330-332 ◽  
pp. 873-876
Author(s):  
Feng Wen ◽  
Nan Huang ◽  
Hong Sun ◽  
Feng Juan Jing ◽  
An Sha Zhao
Keyword(s):  
Band Gap ◽  
Gas Flow ◽  
Blood Platelet ◽  
Vacuum Arc ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Vacuum Arc Deposition ◽  
Filtered Cathodic Vacuum Arc ◽  
Anticoagulant Property

O-doped Diamond-Like carbon (O-DLC) films were prepared by direct magnetic filtered cathodic vacuum arc deposition (DC-MFCVAD) under different O2 gas flow at room temperature (R.T.). Raman spectra were used to characterize structure of films. The wettabilities of the O-DLC films also were investigated by contact angle measurements using four common liquids. For studying films’ interaction with blood, platelet adhesion experiment in vitro was done to characterize anticoagulant property of the O- DLC films from an aspect. Furthermore, ultraviolet spectrophotometer was employed to measure the optical band gap of the synthesized films. All of the results showed that O-DLC films have good anticoagulant property, oxygen doping can prevent graphite-like tendency of DLC films and increase band gap in a way, this kind of film materials may be become a new candidated biomaterials.

Formation and blood compatibility of thin layers of hyperbranched polymers on polyurethane films

e-Polymers ◽  
2002 ◽  
Vol 2 (1) ◽  
Author(s):  
Yong Soon Park ◽  
Yong Soo Kang ◽  
Dong June Chung
Keyword(s):  
Blood Compatibility ◽  
Film Surface ◽  
Hyperbranched Polymers ◽  
Thin Layers ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Unique Method ◽  
Poly Ethylene Oxide ◽  
Ft Ir ◽  
Poly Ethylene

AbstractTwo kinds of hyperbranched polymers, star-shaped poly(ethylene oxide) and poly(2-ethyl-2-oxazoline)-bound polyamidoamine dendrimer, were immobilized on polyurethane (PU) films using photoreactive azidophenyl groups. Immobilization of the hyperbranched polymers was verified by ATR FT-IR observations and contact angle measurements. Using photoreactive molecules, this study shows a unique method to modify polymer films without functional groups easily through immobilization of other polymers on the film surface. PU surfaces modified with immobilized hyperbranched polymer showed significantly reduced platelet adhesion, i.e. increased blood compatibility, as measured via UV spectrometry and scanning electron microscopy.

scholarly journals Preparation and characterization of polyethylene glycol/poly(L-lactic acid) blends

2017 ◽  
Vol 89 (1) ◽  
pp. 141-152 ◽  
Author(s):  
Ioanna-Georgia Athanasoulia ◽  
Petroula A. Tarantili
Keyword(s):  
Contact Angle ◽  
Lactic Acid ◽  
Degradation Process ◽  
Water Contact ◽  
Wetting Ability ◽  
Angle Measurements ◽  
Low Concentrations ◽  
Contact Angle Measurements ◽  
Twin Screw ◽  
Poly Ethylene

AbstractThe effect of incorporation of poly(ethylene glycol) (PEG) on thermomechanical and hydrophilicity properties of poly(L-lactic acid) (PLLA) was investigated. PEG/PLLA blends, containing 10, 20, 30 and 40 wt% PEG, were prepared by melt-extrusion in a co-rotating twin-screw extruder. By DSC analysis, it was observed that the Tg of PLLA phase in PEG/PLLA blends decreased accompanied by a significant decrease in Tcc and increase in their melting enthalpy. Therefore, the addition of PEG enhances the crystallization ability of PLLA phase due to its lubricating effect which increased mobility of PLLA chains. From TGA it was observed that low concentrations of PEG (10 & 20 wt%) increase the Tonset of thermal degradation, probably due to improved heat resistance of the crystalline phase. At higher PEG content, the Tonset decreases, as the lubricating effect becomes the controlling mechanism for the initiation of degradation process. Decrease in tensile strength and modulus was recorded especially in PLLA blends with PEG content higher than 20 wt%. The elongation at break decreases reaching a maximum at 20 wt% PEG and then dropped again. To investigate the effect of PEG on the wetting ability of PLLA, water contact angle measurements were performed. The results indicate that the introduction of PEG lowers the contact angle values in PEG/PLLA film surfaces, as compared to pure PLLA, suggesting improved hydrophilic properties.

Preparation of N, O-Carboxymethyl Chitosan with Different Substitutional Degree and its Application for Hemostasis

2013 ◽  
Vol 798-799 ◽  
pp. 1061-1066 ◽  
Author(s):  
Yan Wei Zhao ◽  
Lu Liu ◽  
Xiang Han ◽  
Jing Guan
Keyword(s):  
Carboxymethyl Chitosan ◽  
X Ray Diffraction ◽  
Clotting Time ◽  
X Ray ◽  
Angle Measurements ◽  
Contact Angle Measurements ◽  
Ft Ir ◽  
Ubbelohde Viscometer

We prepared N, O-carboxymethyl chitosans (CMCSs) with different substitutional degrees (SDs) to evaluate their effects of hemostasis, and provided experimental basis on biomedical materials. Chloroethanoic acid was used to synthesize CMCSs. The structure were characterized by Fourier transform infrared (FT-IR) and wide-angle X-ray diffraction (WXRD). Potentiometric titration and Ubbelohde viscometer were adopted to determine the SD and intrinsic viscosity of CMCSs. Contact angle measurements were investigated to determine surface wettability. Method of dynamic clotting time and coagulation test in vivo were used to evaluate their effects of hemostasis. SDs of CMCSs were from 50% to 110%. As the SD increased, molecular weight decreased. CMCS powder with SD 63% possessed excellent hemostasis both in vitro and in vivo. CMCS powder owned hemostatic capability prior to CS. CMCS powder with SD 63% (neither too high, nor too low) possessed excellent hemostasis both in vitro and in vivo.

scholarly journals Enamel Anti-Demineralization Effect of Orthodontic Adhesive Containing Bioactive Glass and Graphene Oxide: an in-Vitro Study

2018 ◽  
Author(s):  
Seung-Min Lee ◽  
Kyung-Hyeon Yoo ◽  
Seog-Young Yoon ◽  
In-Ryoung Kim ◽  
Bong-Soo Park ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Graphene Oxide ◽  
Cell Viability ◽  
Bioactive Glass ◽  
In Vitro Study ◽  
Biological Properties ◽  
Low Viscosity ◽  
Adhesive Remnant Index ◽  
Base Solution

White spot lesions (WSLs), a side effect of orthodontic treatment, can result in reversible and unaesthetic results. Graphene oxide (GO) with a bioactive glass (BAG) mixture(BAG@GO) was added to Low Viscosity Transbond XT(LV) in a ratio of 1, 3, 5%. The composite&rsquo;s characterization and its physical and biological properties were verified with scanning electron microscopy(SEM) and X-ray diffraction(XRD); its microhardness, shear bond stress (SBS), cell viability, and adhesive remnant index (ARI) were also assessed. Efficiency in reducing WSL was evaluated using antibacterial activity of S. mutans. Anti-demineralization was analyzed using a cycle of the acid-base solution. Adhesives with 3 or 5 wt.% of BAG@GO showed significant increase in microhardness compared with LV. The sample and LV groups showed no significant differences in SBS or ARI. The cell viability test confirmed that none of the sample groups showed higher toxicity compared to the LV group. Antibacterial activity was higher in the 48-hour group than in the 24-hour group; the 48-hour test showed that BAG@GO had a high antibacterial effect, which was more pronounced in 5 wt.% of BAG@GO. Anti-demineralization effect was higher in the BAG@GO-group than in the LV-group; the higher the BAG@GO concentration, the higher the anti-demineralization effect.

Sign in / Sign up

Export Citation Format

Share Document