scholarly journals Impact of Thermal Properties on Crystalline Structure, Polymorphism and Morphology of Polymer Matrices in Composites

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2136
Author(s):  
Maria Raimo

Morphological analysis at different levels is fundamental to understand properties of materials, as these latter are dictated not only by the chemical composition but also by the shape. Solid structures arise from a balance between thermodynamic and kinetic factors, which, especially for polymer composites, depend also on interactions amongst components. In particular, morphology is strongly affected by the heat transfer pattern during crystallization and by the difference in thermal behavior between polymer matrix and filler. Polymers show a spherulitic structure, arising from the start of crystallization in several points of the liquid phase. Within a general rounded shape, spherulites show variability in growth patterns, morphology, and geometry of boundaries. The appearance and the number of spherulites, as well as their growth mechanism, may vary not only in dependence of the chemical composition and the crystalline structures but also, for a same polymer, in consequence of experimental conditions and incorporation of fillers. This article reviews the crystallization process of polymer matrices in the framework of crystal growth and heat transport theories, and explains microstructural differences between composites and neat matrices on the basis of the differences in thermal capacity and conductivity between polymers and additives.

1962 ◽  
Vol 14 ◽  
pp. 149-155 ◽  
Author(s):  
E. L. Ruskol

The difference between average densities of the Moon and Earth was interpreted in the preceding report by Professor H. Urey as indicating a difference in their chemical composition. Therefore, Urey assumes the Moon's formation to have taken place far away from the Earth, under conditions differing substantially from the conditions of Earth's formation. In such a case, the Earth should have captured the Moon. As is admitted by Professor Urey himself, such a capture is a very improbable event. In addition, an assumption that the “lunar” dimensions were representative of protoplanetary bodies in the entire solar system encounters great difficulties.


2021 ◽  
Vol 11 (10) ◽  
pp. 4589
Author(s):  
Ivan Duvnjak ◽  
Domagoj Damjanović ◽  
Marko Bartolac ◽  
Ana Skender

The main principle of vibration-based damage detection in structures is to interpret the changes in dynamic properties of the structure as indicators of damage. In this study, the mode shape damage index (MSDI) method was used to identify discrete damages in plate-like structures. This damage index is based on the difference between modified modal displacements in the undamaged and damaged state of the structure. In order to assess the advantages and limitations of the proposed algorithm, we performed experimental modal analysis on a reinforced concrete (RC) plate under 10 different damage cases. The MSDI values were calculated through considering single and/or multiple damage locations, different levels of damage, and boundary conditions. The experimental results confirmed that the MSDI method can be used to detect the existence of damage, identify single and/or multiple damage locations, and estimate damage severity in the case of single discrete damage.


Membranes ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 460
Author(s):  
Bastiaan Blankert ◽  
Bart Van der Bruggen ◽  
Amy E. Childress ◽  
Noreddine Ghaffour ◽  
Johannes S. Vrouwenvelder

The manner in which membrane-fouling experiments are conducted and how fouling performance data are represented have a strong impact on both how the data are interpreted and on the conclusions that may be drawn. We provide a couple of examples to prove that it is possible to obtain misleading conclusions from commonly used representations of fouling data. Although the illustrative example revolves around dead-end ultrafiltration, the underlying principles are applicable to a wider range of membrane processes. When choosing the experimental conditions and how to represent fouling data, there are three main factors that should be considered: (I) the foulant mass is principally related to the filtered volume; (II) the filtration flux can exacerbate fouling effects (e.g., concentration polarization and cake compression); and (III) the practice of normalization, as in dividing by an initial value, disregards the difference in driving force and divides the fouling effect by different numbers. Thus, a bias may occur that favors the experimental condition with the lower filtration flux and the less-permeable membrane. It is recommended to: (I) avoid relative fouling performance indicators, such as relative flux decline (J/J0); (II) use resistance vs. specific volume; and (III) use flux-controlled experiments for fouling performance evaluation.


2020 ◽  
Vol 30 (Supplement_5) ◽  
Author(s):  
R Bosco ◽  
S Gambelli ◽  
V Urbano ◽  
G Cevenini ◽  
G Messina

Abstract Background Sanitizing the operating theatres (OT) is important to minimize risk of post-operative infections. Disinfection procedures between one operation and another is less aggressive than final cleaning procedures, at the end of the day. Aim was assessing the difference of contamination: i) between different levels of disinfection; ii) before and after the use of a UVC Device (UVC-D). Methods Between December 2019/February 2020 a cross sectional study was conducted in OT in a real clinical context. 94 Petri dishes (PD) were used in 3 OT. Three different sanitation levels (SL1-3) were compared pre- and post-use of UVC-D: i) No cleaning after surgery (SL1); ii) after in-between cleaning (SL2); iii) after terminal cleaning (SL3). UVC-D was employed for 6 minutes, 3 minutes per bed side. PD were incubated at 36 °C and colony forming unit (CFU) counted at 48h. Descriptive statistic, Wilcoxon and Mann-Whitney tests were performed to assess the contamination levels in total, pre/post use of UVC-D, and between different sanitation levels, respectively. Results In total we had a mean of 3.39 CFU/PD (C.I. 2.05 - 4.74) and a median of 1 CFU/PD (Min. 0 - Max. 39), after UVC-D use we had a mean of 2.20 CFU/PD (C.I. 0.69 - 5.09) and a median of 0 CFU/PD (Min. 0 - Max. 133). The UVC-D led to a significant reduction of CFU (p < 0.001). Without UVC-D we had a significant CFU drop (p < 0.05) between SL1 and SL3. Using UVC-D, we observed significant reductions of contamination (p < 0.05) between SL3 and SL1. Comparing SL1 (median 0) post UVC-D use vs SL2 pre UVC-D use (median 0.5), and SL2 post UVC-D use (median 0) vs SL3 pre UVC-D use (median 1) we had a significant reduction of contamination (p < 0.05). Conclusions UVC-D improved environmental contamination in any of the three sanitation levels. Furthermore, the use of UVC-D alone was better than in-between and terminal cleaning. Although these encouraging results, the cleaning procedures executed by dedicated staff has to be considered. Key messages UVC are efficient to decrease contamination in operating theatres regardless of sanitation levels. The additional use of UVC technology to standard cleaning procedures significantly improves sanitation levels.


2021 ◽  
Vol 7 (1) ◽  
pp. 331-341
Author(s):  
Urszula Chwesiuk

Abstract The aim of this study was an attempt to verify whether Polish speakers of English insert a vowel in the word-final clusters containing a consonant and a syllabic /l/ or /n/ due to the L1–L2 transfer. L1 Polish speakers are mostly unaware of the existence of syllabic consonants; hence, they use the Polish phonotactics and articulate a vocalic sound before a final sonorant which is deprived of its syllabicity. This phenomenon was examined among L1 Polish speakers, 1-year students of English studies, and the recording sessions were repeated a year later. Since, over that time, they were instructed with regard to phonetics and phonology but also the overall practical language learning, the results demonstrated the occurrence of the phenomenon of vowel insertion on different levels of advanced command of English. If the vowels were inserted, their quality and length were monitored and analysed. With regard to the English system, pronouncing vowel /ə/ before a syllabic consonant is possible, yet not usual. That is why another aim of this study is to examine to what extent the vowels articulated by the subjects differ from the standard pronunciation of non-final /ə/. The quality differences between the vowels articulated in the words ending with /l/ and /n/ were examined as well as the potential influence from the difference between /l/ and /n/ on the occurrence of vowel reduction. Even though Polish phonotactics permit numerous consonantal combinations in all word positions, it proved to be challenging for L1 Polish speakers to pronounce word-final consonantal clusters containing both syllabic sonorants. This result carries practical implications for the teaching methodology of English phonetics.


2007 ◽  
Vol 90 (5) ◽  
pp. 1346-1353 ◽  
Author(s):  
Diego L García-González ◽  
María Viera-Macías ◽  
Ramón Aparicio-Ruiz ◽  
Maria T Morales ◽  
Ramón Aparicio

Abstract The difference between theoretical and empirical triglyceride content is a powerful tool to detect the presence of any vegetable oil in olive oil. The current drawback of the method is the separation between equivalent carbon number ECN42 compounds, which affects the reliability of the method and, hence, its cutoff limit. The determination of the triglyceride profile by liquid chromatography using propionitrile as the mobile phase has recently been proposed to improve their quantification, together with a mathematical algorithm whose binary response determines the presence or absence of hazelnut oil. Twenty-one laboratories from 9 countries participated in an interlaboratory study to evaluate the performance characteristics of the whole analytical method. Participants analyzed 12 samples in duplicate, split into 3 intercomparison studies. Statistically significant differences due to the experimental conditions were found in some laboratories, which were detected as outliers by use of Cochran's and Grubbs' tests. The relative standard deviations (RSD) for repeatability and reproducibility were determined following the AOAC Guidelines for Collaborative Studies. The analytical properties of the method were determined by means of the sensitivity (0.86), selectivity (0.94), and reliability (72) for a cutoff limit of 8 (probability 94).


2015 ◽  
Vol 54 (06) ◽  
pp. 500-504 ◽  
Author(s):  
A. G. Maglione ◽  
A. Scorpecci ◽  
P. Malerba ◽  
P. Marsella ◽  
S. Giannantonio ◽  
...  

SummaryObjectives: The aim of the present study is to investigate the variations of the electroencephalographic (EEG) alpha rhythm in order to measure the appreciation of bilateral and unilateral young cochlear implant users during the observation of a musical cartoon. The cartoon has been modified for the generation of three experimental conditions: one with the original audio, another one with a distorted sound and, finally, a mute version.Methods: The EEG data have been recorded during the observation of the cartoons in the three experimental conditions. The frontal alpha EEG imbalance has been calculated as a measure of motivation and pleasantness to be compared across experimental populations and conditions.Results: The EEG frontal imbalance of the alpha rhythm showed significant variations during the perception of the different cartoons. In particular, the pattern of activation of normal-hearing children is very similar to the one elicited by the bilateral implanted patients. On the other hand, results related to the unilateral subjects do not present significant variations of the imbalance index across the three cartoons.Conclusion: The presented results suggest that the unilateral patients could not appreciate the difference in the audio format as well as bilaterally implanted and normal hearing subjects. The frontal alpha EEG imbalance is a useful tool to detect the differences in the appreciation of audiovisual stimuli in cochlear implant patients.


De Jure ◽  
2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Daniel Haman ◽  
◽  
◽  

The difference between intent (dolus) and negligence (culpa) was rarely emphasized in codified medieval laws and regulations. When compared to the legal statements related to intent, negligence was mentioned even more rarely. However, there are some laws that distinguished between the two concepts in terms of some specific crimes, such as arson. This paper draws attention to three medieval Slavic legal documents – the Zakon Sudnyj LJudem (ZSLJ), the Vinodol Law and the Statute of Senj. They are compared with reference to regulations regarding arson, with the focus being on arson as a crime committed intentionally or out of negligence. The ZSLJ as the oldest known Slavic law in the world shows some similarities with other medieval Slavic legal codes, especially in the field of criminal law, since most of the ZSLJ’s articles are related to criminal law. On the other hand, the Vinodol Law is the oldest preserved Croatian law and it is among the oldest Slavic codes in the world. It was written in 1288 in the Croatian Glagolitic script and in the Croatian Chakavian dialect. The third document – the Statute of Senj – regulated legal matters in the Croatian littoral town of Senj. It was written in 1388 – exactly a century after the Vinodol Law was proclaimed. When comparing the Vinodol Law and the Statute of Senj with the Zakon Sudnyj LJudem, there are clear differences and similarities, particularly in the field of criminal law. Within the framework of criminal offenses, the act of arson is important for making a distinction between intent and negligence. While the ZSLJ regulates different levels of guilt, the Vinodol Law makes no difference between dolus and culpa. On the other hand, the Statute of Senj strictly refers to negligence as a punishable crime. Even though the ZSLJ is almost half a millennium older than the Statute of Senj and around 400 years older than the Vinodol Law, this paper proves that the ZSLJ defines the guilt and the punishment for arson much better than the other two laws.


2018 ◽  
Vol 107 (1) ◽  
pp. 39-54
Author(s):  
Chunli Wang ◽  
Xiaoyu Yang ◽  
Jiangang He ◽  
Fangxin Wei ◽  
Zhong Zheng ◽  
...  

Abstract To explore the diffusion behavior of 75Se(IV) in Beishan granite (BsG), the influences of temperature, oxygen condition and ionic strength were investigated using the through-diffusion experimental method. The effective diffusion coefficient De of 75Se(IV) in BsG varied from 4.21×10−14 m2/s to 3.19×10−13 m2/s in our experimental conditions, increased with increasing temperature. The formation factor Ff of BsG was calculated to be nearly constant in the range of temperatures investigated, suggesting that the inner structure of BsG had no significant change in the temperature range of 20–55°C. Meanwhile, the De values of 75Se(IV) in BsG under anaerobic condition was significantly larger than that under aerobic condition, which may be attributed to the difference in the sorption characteristics and species distribution of Se and pH values. Moreover, the diffusion of 75Se(IV) was promoted with ionic strength increased from 0.01 M to 0.1 M, and then decreased at 0.5 M, mainly due to the combined effects of reduced double layers with increased ionic strength and increase of the solution viscosity at higher ionic strength.


1969 ◽  
Vol 115 (1) ◽  
pp. 11-18 ◽  
Author(s):  
A. Massaglia ◽  
U. Rosa ◽  
G. Rialdi ◽  
C. A. Rossi

1. The iodination of insulin was studied under various experimental conditions in aqueous media and in some organic solvents, by measuring separately the uptake of iodine by the four tyrosyl groups and the relative amounts of monoiodotyrosine and di-iodotyrosine that are formed. In aqueous media from pH1 to pH9 the iodination occurs predominantly on the tyrosyl groups of the A chain. Some organic solvents increase the iodine uptake of the B-chain tyrosyl groups. Their efficacy in promoting iodination of Tyr-B-16 and Tyr-B-26 is in the order: ethylene glycol and propylene glycol≃methanol and ethanol>dioxan>8m-urea. 2. It is suggested that each of the four tyrosyl groups in insulin has a different environment: Tyr-A-14 is fully exposed to the solvent; Tyr-A-19 is sterically influenced by the environmental structure, possibly by the vicinity of a disulphide interchain bond; Tyr-B-16 is embedded into a non-polar area whose stability is virtually independent of the molecular conformation; Tyr-B-26 is probably in a situation similar to Tyr-B-16 with the difference that its non-polar environment depends on the preservation of the native structure.


Sign in / Sign up

Export Citation Format

Share Document