scholarly journals Microstructure, Mineralogical Characterization and the Metallurgical Process Reconstruction of the Zinc Calcine Relics from the Zinc Smelting Site (Qing Dynasty)

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2087
Author(s):  
Ya Xiao ◽  
Wenli Zhou ◽  
Linheng Mo ◽  
Jianli Chen ◽  
Meiying Li ◽  
...  
Keyword(s):  
Zinc Sulfide ◽  
Qing Dynasty ◽  
Microstructural Analysis ◽  
Composition Analysis ◽  
Metallurgical Process ◽  
Sulfide Ores ◽  
Mineralogical Characterization ◽  
X Ray ◽  
Zinc Smelting ◽  
Roasting Temperature

The smelting of zinc is considered as one of the most challenging technologies in ancient civilization. Compared with non-sulfide zinc ores, the smelting of zinc sulfide ores is more complicated since they have to be roasted before smelting. The technological smelting process of the ancient zinc metallurgy technology has been studied and partly reconstructed. However, the roasting technology, including the roasting conditions and involved metallurgical processes, is still unclear. The discovery of the zinc smelting site of Doulingxia dates back to the Qing dynasty (CE 1636–1912), and for the first time provides us with critical archeological evidence to gain an insight into the roasting technology in ancient zinc metallurgy technology. In this paper, the microstructure and mineralogical features of the zinc calcine relics found at the Doulingxia site were characterized by X-ray diffraction (XRD) and scanning electron microscopy coupled with X-ray energy dispersive spectrometer (SEM-EDS). To reconstruct the metallurgical process, the original roasting temperature of the unearthed zinc calcine was estimated by thermogravimetric analysis and differential thermal analysis (TG-DTA), combined with reheating experiments and phase composition analysis as well as microstructural analysis. The simulation experiments were conducted to reconstruct the roasting process. The results indicated that the original roasting temperature of the unearthed zinc calcine should be in a range of 650–850 °C, most probably near 750 °C. As long as the retention time is long enough, all sphalerite can be oxidized when the roasting temperature is above 650 °C. The final roasting products mainly include tiny porous particles of ZnFe2O4, Fe2O3, PbSO4, and ZnO. These findings are helpful to reconstruct the ancient zinc metallurgy technology of zinc sulfide ores.

scholarly journals Effect of chemical composition on microstructure, hardness and electrical conductivity profiles of the Bi-Cu-Ga alloys at 100 °C

10.30544/211 ◽  
2016 ◽  
Vol 22 (3) ◽  
pp. 179-192
Author(s):  
Dejan Gurešić ◽  
Nadežda Talijan ◽  
Vladan Ćosović ◽  
Dušan Milisavljević ◽  
Aleksandar Đorđević ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Experimental Investigation ◽  
Isothermal Section ◽  
Brinell Hardness ◽  
Microstructural Analysis ◽  
Composition Analysis ◽  
Conductivity Measurements ◽  
Hardness Testing ◽  
X Ray Diffraction ◽  
X Ray

Theoretical calculation and experimental investigation of the isothermal section of a ternary Bi-Cu-Ga system at 100 oC are presented in this paper. Thermodynamic binary-based calculation of the isothermal section was performed using Pandat software. Experimental investigation included microstructural analysis carried out using light optical microscopy (LOM) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS), phase composition analysis using X-ray diffraction (XRD), Brinell and Vickers hardness testing and electrical conductivity measurements. In total, thirty alloy samples with compositions along three vertical sections Bi-CuGa, Cu-BiGa and Ga-BiCu were studied. The obtained experimental results support the calculated phase regions of the isothermal section at 100 oC. Hardness of individual phases as well as hardness and electrical conductivity of the studied alloys were measured. Based on the experimentally obtained results iso-lines of Brinell hardness and electrical conductivity along the whole compositional range were calculated by using appropriate mathematical models.

BETTER UNDERSTANDING THE GEOLOGY OF CENTRAL CUBA THROUGH STREAM SEDIMENT COMPOSITION ANALYSIS USING X-RAY DIFFRACTION

2019 ◽  
Author(s):  
Landon Williamson ◽  
◽  
Nicolas Perdrial ◽  
John M. Hughes ◽  
Mae Kate Campbell ◽  
...  
Keyword(s):  
Stream Sediment ◽  
Composition Analysis ◽  
X Ray Diffraction ◽  
Sediment Composition ◽  
X Ray

scholarly journals The Physico-Chemical and Mineralogical Characterization of Mg-Rich Synthetic Gypsum Produced in a Rare Earth Refining Plant

2021 ◽  
Vol 13 (9) ◽  
pp. 4840
Author(s):  
Fatai Arolu Ayanda ◽  
Mohd Firdaus Mohd Anuar ◽  
Syaharudin Zaibon ◽  
Shamshuddin Jusop
Keyword(s):  
Rare Earth ◽  
Acid Soils ◽  
Acid Neutralization ◽  
Mineralogical Characterization ◽  
X Ray ◽  
Neutralization Capacity ◽  
Acid Neutralization Capacity ◽  
Refining Plant ◽  
Calcium Magnesium

The physical, chemical and mineralogical characterization of the constituents of magnesium-rich synthetic gypsum produced in a rare earth-refining plant located in Gebeng, Pahang, Malaysia was conducted through elemental chemical analysis, scanning electron microscopy with Energy Dispersive X-ray (EDX)-analyzer, thermal analysis, X-ray fluorescence and X-ray diffraction. The crystalline nature of the by-product was studied using FTIR spectroscopy. Elemental analysis confirmed the presence of Ca and Mg, which are essential macronutrients required by plants and this Ca alongside the high pH (9.17) of MRSG may confer on the material a high acid neutralization capacity. From the result, it was observed that the studied by-product is a heterogeneous crystalline material comprising of gypsum (CaSO4.2H2O) and other major components such as calcium (magnesium) compounds (hydroxide, oxide, silicates, and carbonate) and sulfur. These aggregates may contribute to give an acid neutralization capacity to MRSG. The XRD study of MRSG indicated a high content of gypsum (45.4%), shown by the d-spacing of 7.609 Å (2-theta 11.63) in the diffractogram. The infrared absorption spectra of MRSG indicate close similarities to mined gypsum. The results of the characterization indicated that MRSG has valuable properties that can promote its use in amending soil fertility constraints on nutrient-deficient tropical acid soils.

scholarly journals Effect of Molybdenum Content on the Corrosion and Microstructure of Low-Ni, Co-Free Maraging Steels

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 852
Author(s):  
Asiful H. Seikh ◽  
Hossam Halfa ◽  
Mahmoud S. Soliman
Keyword(s):  
Corrosion Resistance ◽  
Electrochemical Impedance ◽  
Microstructural Analysis ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Alloying Element ◽  
X Ray ◽  
Maraging Steels ◽  
Eds Analysis ◽  
Electroslag Refining

Molybdenum (Mo) is an important alloying element in maraging steels. In this study, we altered the Mo concentration during the production of four cobalt-free maraging steels using an electroslag refining process. The microstructure of the four forged maraging steels was evaluated to examine phase contents by optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis. Additionally, we assessed the corrosion resistance of the newly developed alloys in 3.5% NaCl solution and 1 M H2SO4 solution through potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. Furthermore, we performed SEM and energy-dispersive spectroscopy (EDS) analysis after corrosion to assess changes in microstructure and Raman spectroscopy to identify the presence of phases on the electrode surface. The microstructural analysis shows that the formation of retained austenite increases with increasing Mo concentrations. It is found from corrosion study that increasing Mo concentration up to 4.6% increased the corrosion resistance of the steel. However, further increase in Mo concentration reduces the corrosion resistance.

scholarly journals Micro-Fabric Analyzer (MFA): A New Semiautomated ArcGIS-Based Edge Detector for Quantitative Microstructural Analysis of Rock Thin-Sections

2021 ◽  
Vol 10 (2) ◽  
pp. 51 ◽  
Author(s):  
Roberto Visalli ◽  
Gaetano Ortolano ◽  
Gaston Godard ◽  
Rosolino Cirrincione
Keyword(s):  
Physical Properties ◽  
Electron Backscatter Diffraction ◽  
Microstructural Analysis ◽  
Image Features ◽  
Elemental Distribution ◽  
Edge Detector ◽  
Sandstone Sample ◽  
Thin Sections ◽  
X Ray ◽  
Distribution Maps

Micro-Fabric Analyzer (MFA) is a new GIS-based tool for the quantitative extrapolation of rock microstructural features that takes advantage both of the characteristics of the X-ray images and the optical image features. Most of the previously developed edge mineral grain detectors are uniquely based on the physical properties of the X-ray-, electron-, or optical-derived images; not permitting the exploitation of the specific physical properties of each image type at the same time. More advanced techniques, such as 3D microtomography, permit the reconstruction of tridimensional models of mineral fabric arrays, even though adjacent mineral grain boundaries with the same atomic density are often not detectable. Only electron backscatter diffraction (EBSD) allows providing high-performing grain boundary detection that is crystallographically differentiated per mineral phase, even though it is relatively expensive and can be executed only in duly equipped microanalytical laboratories by suitably trained users. Instead, the MFA toolbox allows quantifying fabric parameters subdivided per mineral type starting from a crossed-polarizers high-resolution RGB image, which is useful for identifying the edges of the individual grains characterizing rock fabrics. Then, this image is integrated with a set of micro-X-ray maps, which are useful for the quantitative extrapolation of elemental distribution maps. In addition, all this is achieved by means of low-cost and easy-to-use equipment. We applied the tool on amphibolite, mylonitic-paragneiss, and -tonalite samples to extrapolate the particle fabric on different metamorphic rock types, as well as on the same sandstone sample used for another edge detector, which is useful for comparing the obtained results.

Preliminary Study of Alginates Extracted from Brown Algae (Sargassum sp.) Available in Madura Island as Composite Based Hydrogel Materials

2019 ◽  
Vol 964 ◽  
pp. 240-245 ◽  
Author(s):  
Amaliya Rasyida ◽  
Thalyta Rizkha Pradipta ◽  
Sigit Tri Wicaksono ◽  
Vania Mitha Pratiwi ◽  
Yeny Widya Rakhmawati
Keyword(s):  
Sodium Alginate ◽  
Brown Algae ◽  
Extraction Process ◽  
Composition Analysis ◽  
3D Printer ◽  
X Ray Diffraction ◽  
X Ray ◽  
3D Printed ◽  
Preliminary Study

Utilization of brown algae especially in Madura, where it’s close to Surabaya, only limited for food. This become a reference for developing and increasing the potential of this algae by extracting one of the ingredients, namely alginate. This paper deals with the characterization of sodium alginate extracted from sargassum sp. using modified-purified calcium routes. The extracted sodium alginate will be further used as composite hydrogel materials and compared with commercial sodium alginate. Hereafter, the synthesized composite is expected to be bio-ink for 3d printer. Chemical composition analysis were analyzed using X-Ray Fluorosense (XRF) followed by Fourier-transform infrared spectroscopy (FTIR) analysis to identify the functional group of composite and X-Ray Diffraction (XRD). Furthermore, viscosity bath is performed to compare the viscosity of extracted and commercial one. The result shows that modified-purified calcium routes in the extraction process of sodium alginate is desirable for improving their properties. Interestingly enough, with the goal of using it as bio-ink in 3d printed fabrication, the synthesized composite shows viscosity, 300 cSt, which meets the criteria for bio-ink in 3d printer.

Composition Analysis of Ge/Si1-xGex: C Buffer on Silicon Measured by Planar Scanning Energy Dispersive Spectroscopy

2011 ◽  
Vol 383-390 ◽  
pp. 7619-7623
Author(s):  
Z Z Lu ◽  
F. Yu ◽  
L. Yu ◽  
L. H. Cheng ◽  
P. Han
Keyword(s):  
Energy Dispersive Spectroscopy ◽  
Chemical Vapor ◽  
Energy Dispersive ◽  
Composition Analysis ◽  
X Ray Diffraction ◽  
Si Substrate ◽  
Composition Distribution ◽  
X Ray ◽  
Cvd Method ◽  
Substrate Structure

In this work, Si, Ge element composition distribution in Ge /Si1-xGex:C /Si substrate structure has been characterized and modified by planar scanning energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The Ge /Si1-xGex:C /Si substrate samples are grown by chemical vapor deposition (CVD) method. The accuracy of EDS value can be improved by ~ 32%. And the modified EDS results indicate the Ge distribution in the Ge/Si1-xGex:C/Si sub structure.

Sign in / Sign up

Export Citation Format

Share Document