scholarly journals Impact of TiO2 Nanostructures on Dye-Sensitized Solar Cells Performance

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1633
Author(s):  
Paweł Gnida ◽  
Paweł Jarka ◽  
Pavel Chulkin ◽  
Aleksandra Drygała ◽  
Marcin Libera ◽  
...  
Keyword(s):  
Solar Cells ◽  
Electrochemical Impedance ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Sensitized Solar Cells ◽  
Tio2 Nanostructures

The effect of TiO2 nanostructures such as nanoparticles, nanowires, nanotubes on photoanode properties, and dye-sensitized solar cells photovoltaic parameters were studied. The series of dye-sensitized solar cells based on two dyes, that is, commercially N719 and synthesized 3,7′-bis(2-cyano-1-acrylic acid)-10-ethyl-phenothiazine were tested. Additionally, the devices containing a mixture of this sensitizer and chenodeoxycholic acid as co-adsorbent were fabricated. The amount of adsorbed dye molecules to TiO2 was evaluated. The prepared photoanodes with different TiO2 nanostructures were investigated using UV-Vis spectroscopy, optical, atomic force, and scanning electron microscopes. Photovoltaic response of constructed devices was examined based on current-voltage characteristics and electrochemical impedance spectroscopy measurements. It was found that the highest UV-Vis absorption exhibited the photoanode with nanotubes addition. This indicates the highest number of sensitizer molecules anchored to the titanium dioxide photoanode, which was subsequently confirmed by dye-loading tests. The highest power conversion efficiency was (6.97%) for solar cell containing nanotubes and a mixture of the dyes with a co-adsorbent.

Design and Synthesis of Ruthenium (II) Complexes and their Applications in Dye Sensitized Solar Cells (DSSCs)

2013 ◽  
Vol 770 ◽  
pp. 92-95 ◽  
Author(s):  
Preeyapat Prompan ◽  
Kittiya Wongkhan ◽  
Rukkiat Jitchati
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Force Microscopy ◽  
Design And Synthesis ◽  
Dye Sensitized ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Sensitized Solar Cells ◽  
C Nmr

Three thiocyanate-free ruthenium (II) sensitizers, [RuII(dcppy)(L1-L3)](PF6)] where dcppy = 4, 4-dicarboxylic acid-2, 2-bipyridine, L1 = 2-(2,4-difluorophenyl)-5-(trifluoromethyl) pyridine, L2 = 2-(2,4-difluorophenyl) pyridine and L3 = 2-phenyl-5-(trifluoromethyl) pyridine were synthesized and applied for dye-sensitized solar cells (DSSCs). The structures of ruthenium complexes were characterized by 1H, 13C NMR and IR spectra. The absorption was studied by UV-Vis spectroscopy and the electrochemical property was determined by cyclic voltammetry. The surface morphology of ruthenium complexes on mica was examined by atomic force microscopy. The performance of this complexes as photosensitizer in TiO2 based dye sensitized solar cells is studied under standard AM 1.5 sunlight and by using an electrolyte.

Investigations of Anodization Parameters and TiCl4 Treatments on TiO2 Nanostructures for Highly Optimized Dye-Sensitized Solar Cells

2021 ◽  
pp. 101578
Author(s):  
Hafiz Muhammad Asif Javed ◽  
Wenxiu Que ◽  
Muhammad Shahid ◽  
Akbar Ali Qureshi ◽  
M. Afzaal ◽  
...  
Keyword(s):  
Solar Cells ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Tio2 Nanostructures

Microstructure, fractal geometry and dye-sensitized solar cells performance of CdS/TiO2 nanostructures

2018 ◽  
Vol 830-831 ◽  
pp. 80-87 ◽  
Author(s):  
Tahereh Hoseinzadeh ◽  
Shahram Solaymani ◽  
Slawomir Kulesza ◽  
Amine Achour ◽  
Zohreh Ghorannevis ◽  
...  
Keyword(s):  
Solar Cells ◽  
Fractal Geometry ◽  
Dye Sensitized Solar Cells ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Tio2 Nanostructures

Analysis of Charge Transport and Recombination Studied by Electrochemical Impedance Spectroscopy for Dye-sensitized Solar Cells With Atomic Layer Deposited Metal Oxide Treatment on TiO2 Surface

2010 ◽  
Vol 1270 ◽  
Author(s):  
Braden Bills ◽  
Mariyappan Shanmugam ◽  
Mahdi Farrokh Baroughi ◽  
David Galipeau
Keyword(s):  
Solar Cells ◽  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Electrochemical Impedance ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Atomic Layer ◽  
Back Reaction ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

AbstractThe performance of dye-sensitized solar cells (DSSCs) is limited by the back-reaction of photogenerated electrons from the porous titanium oxide (TiO2) nanoparticles back into the electrolyte solution, which occurs almost exclusively through the interface. This and the fact that DSSCs have a very large interfacial area makes their performance greatly dependant on the density and activity of TiO2 surface states. Thus, effectively engineering the TiO2/dye/electrolyte interface to reduce carrier losses is critically important for improving the photovoltaic performance of the solar cell. Atomic layer deposition (ALD), which uses high purity gas precursors that can rapidly diffuse through the porous network, was used to grow a conformal and controllable aluminum oxide (Al2O3) and hafnium oxide (HfO2) ultra thin layer on the TiO2 surface. The effects of this interfacial treatment on the DSSC performance was studied with dark and illuminated current-voltage and electrochemical impedance spectroscopy (EIS) measurements.

scholarly journals A down-shifting Eu 3+ -doped Y 2 WO 6 /TiO 2 photoelectrode for improved light harvesting in dye-sensitized solar cells

2018 ◽  
Vol 5 (2) ◽  
pp. 171054 ◽  
Author(s):  
J. Llanos ◽  
I. Brito ◽  
D. Espinoza ◽  
Ramkumar Sekar ◽  
P. Manidurai
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Light Harvesting ◽  
Electrochemical Impedance ◽  
Dye Sensitized Solar Cells ◽  
Photoelectric Conversion Efficiency ◽  
Visible Radiation ◽  
Photoelectric Conversion ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

Y 1.86 Eu 0.14 WO 6 phosphors were prepared using a solid-state reaction method. Their optical properties were analysed, and they was mixed with TiO 2 , sintered, and used as a photoelectrode (PE) in dye-sensitized solar cells (DSSCs). The as-prepared photoelectrode was characterized by photoluminescence spectroscopy, diffuse reflectance, electrochemical impedance spectroscopy (EIS) and X-ray diffraction. The photoelectric conversion efficiency of the DSSC with TiO 2 :Y 1.86 Eu 0.14 WO 6 (100:2.5) was 25.8% higher than that of a DSCC using pure TiO 2 as PE. This high efficiency is due to the ability of the luminescent material to convert ultraviolet radiation from the sun to visible radiation, thus improving the solar light harvesting of the DSSC.

scholarly journals Photovoltaic Performance of Dye-Sensitized Solar Cells Containing ZnO Microrods

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1645 ◽  
Author(s):  
Seong Il Cho ◽  
Hye Kyeong Sung ◽  
Sang-Ju Lee ◽  
Wook Hyun Kim ◽  
Dae-Hwan Kim ◽  
...  
Keyword(s):  
Solar Cells ◽  
Surface Area ◽  
Electrochemical Impedance ◽  
Collection Efficiency ◽  
Photovoltaic Performance ◽  
Dye Sensitized Solar Cells ◽  
Charge Recombination ◽  
Growth Time ◽  
Dye Sensitized ◽  
Sensitized Solar Cells

At an elevated temperature of 90 °C, a chemical bath deposition using an aqueous solution of Zn(NO3)2·6H2O and (CH2)6N4 resulted in the formation of both nanoflowers and microrods of ZnO on F-doped SnO2 glass with a seed layer. The nanoflowers and microrods were sensitized with dyes for application to the photoelectrodes of dye-sensitized solar cells (DSSCs). By extending the growth time of ZnO, the formation of nanoflowers was reduced and the formation of microrods favored. As the growth time was increased from 4 to 6 and then to 8 h, the open circuit voltage (Voc) values of the DSSCs were increased, whilst the short circuit current (Jsc) values varied only slightly. Changes in the dye-loading amount, dark current, and electrochemical impedance were monitored and they revealed that the increase in Voc was found to be due to a retardation of the charge recombination between photoinjected electrons and I3− ions and resulted from a reduction in the surface area of ZnO microrods. A reduced surface area decreased the dye contents adsorbed on the ZnO microrods, and thereby decreased the light harvesting efficiency (LHE). An increase in the electron collection efficiency attributed to the suppressed charge recombination counteracted the decreased LHE, resulting in comparable Jsc values regardless of the growth time.

Sign in / Sign up

Export Citation Format

Share Document