scholarly journals Research on Improving the Durability of Bridge Pavement Using a High-Modulus Asphalt Mixture

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1449
Author(s):  
Wenfeng Wang ◽  
Shaochan Duan ◽  
Haoran Zhu
Keyword(s):  
Construction Industry ◽  
Mechanical Response ◽  
Design Method ◽  
Asphalt Mixture ◽  
Field Tests ◽  
Bottom Layer ◽  
High Modulus ◽  
Practical Applications ◽  
Depth Prediction ◽  
Pavement Structure

In order to improve the durability of the asphalt pavement on a cement concrete bridge, this study investigated the effect of the modulus of the asphalt mixture at the bottom layer on the mechanical response of bridge pavement, along with a type of emerging bridge pavement structure. In addition, the design method and pavement performance of a high-modulus asphalt mixture were investigated using laboratory and field tests, and the life expectancy of the deck pavement structure was predicted based on the rutting deformation. The results showed that the application of a high-modulus asphalt mixture as the bottom asphalt layer decreased the stress level of the pavement structure. The new high-modulus asphalt mixture displayed excellent comprehensive performance, i.e., the dynamic stability reached 9632 times/mm and the fatigue life reached 1.65 million cycles. Based on the rutting depth prediction, using high-modulus mixtures for the bridge pavement prolonged the service life from the original 5 years to 10 years, which significantly enhanced the durability of the pavement structure. These research results could be of potential interest for practical applications in the construction industry.

Dynamic Mechanical Response Validation of Pavement Structural under Complex Stress State

2010 ◽  
Vol 163-167 ◽  
pp. 1645-1650
Author(s):  
Guo Ping Qian ◽  
Shuai Li ◽  
Li Jun Jiang
Keyword(s):  
Stress State ◽  
Model Calculation ◽  
Mechanical Response ◽  
Structural Response ◽  
Complex Stress ◽  
Calculation Model ◽  
Dynamic Strain ◽  
Response Model ◽  
Dynamic Mechanical ◽  
Pavement Structure

Under the heavy traffic, the stress state of asphalt pavement structure has such a complex change that it is difficult for conventional pavement structural response calculation model to deal with. Therefore, "Pavement structure dynamic mechanical response model under complex stress condition" is established in this paper. Kinds of cases are calculated according to the characteristics of heavy vehicle. Then the FWD deflection test and dynamic strain test are carried out. Finally, the rationality of pavement structural response model calculation model is proved by comparing the test results with the theoretical model calculation results.

Key Technique on the Process Control for Construction of Hohhot Circle Expressway Asphalt Pavements

2012 ◽  
Vol 256-259 ◽  
pp. 1748-1753
Author(s):  
Bin Zhao ◽  
Pei Wen Hao
Keyword(s):  
Inner Mongolia ◽  
Raw Materials ◽  
Asphalt Pavement ◽  
Load Capacity ◽  
Asphalt Mixture ◽  
Natural Increase ◽  
Rigid Base ◽  
Construction Technology ◽  
Pavement Structure ◽  
Major Section

As vehicle flow on arterial highway in Inner Mongolia sharply increased, the originally designed natural increase rate of 8% per year has been exceeded on the vehicle flow in some sections. According to statistics, monthly average vehicle flow on major section of G6 expressway has reached a standard flow of 67478 vehicles per day and night, of which in 70-80% are large ones for coal transportation. Therefore, pavement load and road capacity have exceed the designed expressway load capacity. At present, semi-rigid base asphalt pavement structure is still widely used for high-grade highway pavement in Inner Mongolia. With years of construction for such pavement structure, a great deal of valuable experience has been gained on construction technology. However, there are still a few deficiencies in the quality of raw materials, gradation control of asphalt mixture and adjustment of equipment, etc. Hohhot circle expressway connects with the G6 and G7 expressways, suffering from problems such as large vehicle flow and load overweight. This paper introduced a key technique that should be properly controlled during construction of such pavement structure, emphasized technique control and management of the following aspects, i.e. ballast sizes and gradation control, asphalt concrete mixture, adjustment of pavers, validation of mixing proportion in production and reasonable arrangement of process, and summarized corresponding technical measures taken during construction of asphalt pavement in this project.

scholarly journals Analysis of the Correlation between the Static and Fatigue Test Results of the Interlayer Bondings of Asphalt Layers

2016 ◽  
Vol 62 (1) ◽  
pp. 83-98 ◽  
Author(s):  
A. Szydło ◽  
K. Malicki
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Test Results ◽  
Static Tests ◽  
Bonding State ◽  
Road Pavement ◽  
The Future ◽  
Pavement Structure

Abstract The bonding state of the asphalt layers in a road pavement structure significantly affects its fatigue life. These bondings, therefore, require detailed tests and optimization. In this paper, the analyses of the correlation between the results of laboratory static tests and the results of fatigue tests of asphalt mixture interlayer bondings were performed. The existence of the relationships between selected parameters was confirmed. In the future, the results of these analyses may allow for assessment of interlayer bondings’ fatigue life based on the results of quick and relatively easy static tests.

scholarly journals Study on Mix Proportion Optimization of Manufactured Sand RPC and Design Method of Steel Fiber Content under Different Curing Methods

Materials ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 1845 ◽  
Author(s):  
Chunling Zhong ◽  
Mo Liu ◽  
Yunlong Zhang ◽  
Jing Wang
Keyword(s):  
Steel Fiber ◽  
Design Method ◽  
Fiber Content ◽  
Orthogonal Experimental Design ◽  
Curing Conditions ◽  
Practical Applications ◽  
Manufactured Sand ◽  
Binder Ratio ◽  
Curing Methods ◽  
Reactive Powder

This study investigated four factors (water/binder ratio, silica fume, fly ash, and sand/binder ratio) using the orthogonal experimental design method to prepare the mix proportions of a manufactured sand reactive powder concrete (RPC) matrix to determine the optimal matrix mix proportions. On this basis, we assessed the compressive and splitting tensile strengths of different steel fiber contents under natural, standard, and compound curing conditions to develop an economical and reasonable RPC for various engineering requirements. A calculation method for the RPC strength of the steel fiber contents was evaluated. The results showed that the optimum steel fiber content for manufactured sand RPC is 4% under natural, standard, and compound curing conditions. Compared with standard curing, compound curing can improve the early strength of manufactured sand RPC but only has a small effect on the enhancement of late strength. Although the strength of natural curing is slightly lower than that of standard curing, it basically meets project requirements and is beneficial for practical applications. The calculation formula of 28-day compressive and splitting tensile strengths of manufactured sand RPC steel fiber at 0%–4% is proposed to meet the different engineering requirements and the flexible selection of steel fiber content.

scholarly journals Dynamic Modulus Prediction of a High-Modulus Asphalt Mixture

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Chaohui Wang ◽  
Songyuan Tan ◽  
Qian Chen ◽  
Jiguo Han ◽  
Liang Song ◽  
...  
Keyword(s):  
Neural Network ◽  
Prediction Model ◽  
Multiple Regression ◽  
Dynamic Modulus ◽  
Prediction Error ◽  
Prediction Models ◽  
Asphalt Mixture ◽  
High Modulus ◽  
Output Stability ◽  
Svm Model

Dynamic modulus is a key evaluation index of the high-modulus asphalt mixture, but it is relatively difficult to test and collect its data. The purpose is to achieve the accurate prediction of the dynamic modulus of the high-modulus asphalt mixture and further optimize the design process of the high-modulus asphalt mixture. Five high-temperature performance indexes of high-modulus asphalt and its mixture were selected. The correlation between the above five indexes and the dynamic modulus of the high-modulus asphalt mixture was analyzed. On this basis, the dynamic modulus prediction models of the high-modulus asphalt mixture based on small sample data were established by multiple regression, general regression neural network (GRNN), and support vector machine (SVM) neural network. According to parameter adjustment and cross-validation, the output stability and accuracy of different prediction models were compared and evaluated. The most effective prediction model was recommended. The results show that the SVM model has more significant prediction accuracy and output stability than the multiple regression model and the GRNN model. Its prediction error was 0.98–9.71%. Compared with the other two models, the prediction error of the SVM model declined by 0.50–11.96% and 3.76–13.44%. The SVM neural network was recommended as the dynamic modulus prediction model of the high-modulus asphalt mixture.

scholarly journals Long-Term Performance of Pavement Structures with Cold In-Place Recycled Base Course

2021 ◽  
Vol 16 (2) ◽  
pp. 48-65
Author(s):  
Audrius Vaitkus ◽  
Judita Gražulytė ◽  
Andrius Baltrušaitis ◽  
Jurgita Židanavičiūtė ◽  
Donatas Čygas
Keyword(s):  
Asphalt Pavement ◽  
Asphalt Mixture ◽  
Asphalt Pavements ◽  
Recycled Asphalt ◽  
Binding Agents ◽  
Pavement Structure ◽  
Pavement Structures ◽  
Base Course ◽  
Surface Distress ◽  
Foamed Bitumen

Properly designed and maintained asphalt pavements operate for ten to twenty-five years and have to be rehabilitated after that period. Cold in-place recycling has priority over all other rehabilitation methods since it is done without preheating and transportation of reclaimed asphalt pavement. Multiple researches on the performance of cold recycled mixtures have been done; however, it is unclear how the entire pavement structure (cold recycled asphalt pavement overlaid with asphalt mixture) performs depending on binding agents. The main objective of this research was to evaluate the performance of cold in-place recycled asphalt pavements considering binding agents (foamed bitumen in combination with cement or only cement) and figure out which binder leads to the best pavement performance. Three road sections rehabilitated in 2000, 2003, and 2005 were analysed. The performance of the entire pavement structure was evaluated in terms of the International Roughness Index, rut depth, and pavement surface distress in 2013 and 2017.

Sign in / Sign up

Export Citation Format

Share Document