scholarly journals Concrete Slab-Type Elements Strengthened with Cast-in-Place Carbon Textile Reinforced Concrete System

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1437
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu ◽  
Gi-Hong Ahn ◽  
Kyung-Taek Koh
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Surface Coating ◽  
Concrete Slab ◽  
Strengthening Effect ◽  
Reinforcing Bars ◽  
Textile Reinforced Concrete ◽  
Flexural Strengthening ◽  
Flexural Failure ◽  
Rc Slab

Although carbon textile reinforcement widely used to replace the steel reinforcing bars but the bonding strength of carbon textile is generally much smaller than that of common steel bars. This study examines the strengthening effect of concrete slab-type elements strengthened in flexure by carbon textile reinforcement according to the surface coating of textile and the amount of reinforcement. The effect of the surface coating of textile on the bond strength was evaluated through a direct pullout test with four different sizes of coating material. The surface coated specimens developed bond strength approximately twice that of the uncoated specimen. The flexural strengthening effect with respect to the amount of reinforcement was investigated by a series of flexural failure tests on full-scale reinforced concrete (RC) slab specimens strengthened by textile reinforced concrete (TRC) system. The flexural failure test results revealed that the TRC system-strengthened specimens develop load-carrying capacity that is improved to at least 150% compared to the non-strengthened specimen. The strengthening performance was not significantly influenced by the textile coating and was not proportional to the amount of reinforcement when this amount was increased, owing to the change in the failure mode. The outstanding constructability afforded by TRC strengthening was verified through field applications executing TRC strengthening by shotcreting on a concrete box culvert.

scholarly journals Flexural Strengthening of Concrete Slab-Type Elements with Textile Reinforced Concrete

Materials ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2246 ◽  
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu ◽  
Kyung-Taek Koh ◽  
Gi-Hong Ahn ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Tensile Test ◽  
Tensile Properties ◽  
Surface Coating ◽  
Strengthening Effect ◽  
Test Results ◽  
Short Fibers ◽  
Textile Reinforced Concrete ◽  
Flexural Strengthening ◽  
The Matrix

This paper deals with flexural strengthening of reinforced concrete (RC) slabs with a carbon textile reinforced concrete (TRC) system. The surface coating treatment was applied to a carbon grid-type textile to increase the bond strength. Short fibers were incorporated into the matrix to mitigate the formation of shrinkage-induced cracks. The tensile properties of the TRC system were evaluated by a direct tensile test with a dumbbell-type grip method. The tensile test results indicated that the effect of the surface coating treatment of the textile on the bonding behavior of the textile within the TRC system was significant. Furthermore, the incorporation of short fibers in the matrix was effective to mitigate shrinkage-induced crack formation and to improve the tensile properties of the TRC system. Six full-scale slab specimens were strengthened with the TRC system and, subsequently, failure tested. The ultimate load-carrying capacity of the strengthened slabs was compared with that of an unstrengthened slab as well as the theoretical solutions. The failure test results indicated that the stiffness and the ultimate flexural capacity of the strengthened slab were at least 112% and 165% greater, respectively, than that of the unstrengthened slab. The test results further indicated that the strengthening effect was not linearly proportional to the amount of textile reinforcement.

scholarly journals Strengthening of Concrete Element with Precast Textile Reinforced Concrete Panel and Grouting Material

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3856
Author(s):  
Young-Jun You ◽  
Hyeong-Yeol Kim ◽  
Gum-Sung Ryu ◽  
Kyung-Taek Koh ◽  
Gi-Hong Ahn ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Bending Test ◽  
Strengthening Effect ◽  
Textile Reinforced Concrete ◽  
Concrete Element ◽  
Rc Structures ◽  
Flexural Strengthening ◽  
Grouting Material ◽  
Rc Slab ◽  
Rc Slabs

Textile reinforced concrete (TRC) has widely been used for strengthening work for deteriorated reinforced concrete (RC) structures. The structural strengthening often requires accelerated construction with the aid of precast or prefabricated elements. This study presents an innovative method to strengthen an RC slab-type element in flexure using a precast panel made of carbon TRC. A total of five RC slabs were fabricated to examine the flexural strengthening effect. Two of them were strengthened with the precast panel and grouting material and another set of two slabs was additionally strengthened by tensile steel reinforcement. The full-scale slab specimens were tested by a three-point bending test and the test results were compared with the theoretical solutions. The results revealed that the ultimate load of the specimens strengthened with the TRC panel increased by at least 1.5 times compared to that of the unstrengthened specimen. The application of the precast TRC panel and grouting material for the strengthening of a prototype RC structure verified its outstanding constructability.

scholarly journals Reinforced Concrete Slabs Strengthened with Lap-Spliced Carbon TRC System

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3340
Author(s):  
Hyeong-Yeol Kim ◽  
Young-Jun You ◽  
Gum-Sung Ryu
Keyword(s):  
Reinforced Concrete ◽  
Concrete Slabs ◽  
Textile Reinforced Concrete ◽  
Lap Splice ◽  
Flexural Failure ◽  
Reinforced Concrete Slabs ◽  
Tensile Performance ◽  
Matrix Properties ◽  
Rc Slab ◽  
Rc Slabs

Construction with precast or prefabricated elements requires the connecting of structural joints. This study presents an accelerated construction method to strengthen reinforced concrete (RC) slab-type elements in flexure using precast lap-spliced textile-reinforced concrete (TRC) panels. The objectives of this study are to identify the tensile behavior of a TRC system with lap-spliced textile, and to experimentally validate the performance of the proposed connecting method by flexural failure test for the concrete slabs strengthened by TRC panels with lap-spliced textile. Twenty-one coupon specimens were tested in tension with two different matrix systems and three different lap splice lengths. The influence of the lap splice length and matrix properties on the tensile performance of the TRC system was significant. Five full-scale RC slabs were strengthened by the precast TRC panels with and without the lap splice, and was tested in flexure. The results of the failure test for the strengthened specimens showed that the ultimate load of the strengthened specimen with the TRC panel increased by a maximum of 24%, compared to that of the unstrengthened specimen. Moreover, the failure-tested specimens were re-strengthened by a new TRC panel system and tested again in flexure. The objective of the re-strengthening of the damaged RC slabs by the TRC panel is to investigate whether the yielded steel reinforcement can be replaced by the TRC panel. The initial cracking load and the stiffness of the re-strengthened specimens were significantly increased by re-strengthening.

Bond behaviour of chemically prestressed textile reinforced concrete

2019 ◽  
Author(s):  
Katarzyna Zdanowicz ◽  
Boso Schmidt ◽  
Hubert Naraniecki ◽  
Steffen Marx
Keyword(s):  
Reinforced Concrete ◽  
Bond Strength ◽  
Crack Width ◽  
Research Programme ◽  
Textile Reinforced Concrete ◽  
Self Compacting Concrete ◽  
Bond Behaviour ◽  
Bond Slip ◽  
Laser Sensors ◽  
Pull Out

<p>The bond behaviour of concrete specimens with carbon textile reinforcement was investigated in the presented research programme. Pull-out specimens were cast from self-compacting concrete with expansive admixtures and in this way chemical prestress was introduced. The aim of the research was to compare bond behaviour between prestressed specimens and non-prestressed control specimens. During pull-out tests, the pull-out force and notch opening were measured with a load cell and laser sensors. Further, bond - slip and pull-out force - crack width relationships were drawn and compared for prestressed and non-prestressed specimens. Chemically prestressed specimens reached 24% higher bond strength than non-prestressed ones. It can be therefore concluded, that chemical prestressing positively influences the bond behaviour of concrete with textile reinforcement and thus better utilisation of its properties can be provided.</p>

scholarly journals Flexural Strengthening of RC Structures with TRC—Experimental Observations, Design Approach and Application

2019 ◽  
Vol 9 (7) ◽  
pp. 1322 ◽  
Author(s):  
Silke Scheerer ◽  
Robert Zobel ◽  
Egbert Müller ◽  
Tilo Senckpiel-Peters ◽  
Angela Schmidt ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Design Model ◽  
Textile Reinforced Concrete ◽  
Bending Tests ◽  
Rc Structures ◽  
Flexural Strengthening ◽  
Reinforced Concrete Slabs ◽  
Open Questions ◽  
Basic Behavior ◽  
Strengthening Method

Today, the need for structural strengthening is more important than ever. Flexural strengthening with textile reinforced concrete (TRC) is a recommendable addition to already proven methods. In order to use this strengthening method in construction practice, a design model is required. This article gives a brief overview of the basic behavior of reinforced concrete slabs strengthened with TRC in bending tests as already observed by various researchers. Based on this, a design model was developed, which is presented in the main part of the paper. In addition to the model, its assumptions and limits are discussed. The paper is supplemented by selected application examples to show the possibilities of the described strengthening method. Finally, the article will give an outlook on open questions and current research.

scholarly journals Flexural and Shear Tests on Reinforced Concrete Bridge Deck Slab Segments with a Textile-Reinforced Concrete Strengthening Layer

Materials ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4210 ◽  
Author(s):  
Viviane Adam ◽  
Jan Bielak ◽  
Christian Dommes ◽  
Norbert Will ◽  
Josef Hegger
Keyword(s):  
Reinforced Concrete ◽  
High Performance ◽  
Large Scale ◽  
Shear Failure ◽  
Bridge Deck ◽  
High Strength ◽  
Shear Capacity ◽  
Strengthening Effect ◽  
Textile Reinforced Concrete ◽  
Carbon Fibre Reinforced Polymer

Many older bridges feature capacity deficiencies. This is mainly due to changes in code provisions which came along with stricter design rules and increasing traffic, leading to higher loads on the structure. To address capacity deficiencies of bridges, refined structural analyses with more detailed design approaches can be applied. If bridge assessment does not provide sufficient capacity, strengthening can be a pertinent solution to extend the bridge’s service lifetime. For numerous cases, applying an extra layer of textile-reinforced concrete (TRC) can be a convenient method to achieve the required resistance. Here, carbon fibre-reinforced polymer reinforcement together with a high-performance mortar was used within the scope of developing a strengthening layer for bridge deck slabs, called SMART-DECK. Due to the high tensile strength of the carbon and its resistance to corrosion, a thin layer with high strength and low additional dead load can be realised. While the strengthening effect of TRC for slabs under flexural loading has already been investigated several times, the presented test programme also covered increase in shear capacity, which is the other crucial failure mode to be considered in design. A total of 14 large-scale tests on TRC-strengthened slab segments were tested under static and cyclic loading. The experimental study revealed high increases in capacity for both bending and shear failure.

Sign in / Sign up

Export Citation Format

Share Document