scholarly journals Improvement of DC Breakdown Strength of the Epoxy/POSS Nanocomposite by Tailoring Interfacial Electron Trap Characteristics

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1298
Author(s):  
Farooq Aslam ◽  
Zhen Li ◽  
Guanghao Qu ◽  
Yang Feng ◽  
Shijun Li ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Breakdown Voltage ◽  
Breakdown Strength ◽  
Deep Level ◽  
Simulation Method ◽  
Neat Epoxy ◽  
Interfacial Region ◽  
Chemical Calculation ◽  
Oligomeric Silsesquioxane ◽  
Underlying Risk

To date, breakdown voltage is an underlying risk to the epoxy-based electrical high voltage (HV) equipment. To improve the breakdown strength of epoxy resin and to explore the formation of charge traps, in this study, two types of polyhedral oligomeric silsesquioxane (POSS) fillers are doped into epoxy resin. The breakdown voltage test is performed to investigate the breakdown strength of neat epoxy and epoxy/POSS composites. Electron traps that play an important role in breakdown strength are characterized by thermally stimulated depolarized current (TSDC) measurement. A quantum chemical calculation tool identifies the source of traps. It is found that adding octa-glycidyl POSS (OG-POSS) to epoxy enhances the breakdown strength than that of neat epoxy and epoxycyclohexyl POSS (ECH-POSS) incorporated epoxy. Moreover, side groups of OG-POSS possess higher electron affinity (EA) and large electronegativity that introduces deep-level traps into epoxy resin and restrain the electron transport. In this work, the origin of traps has been investigated by the simulation method. It is revealed that the functional properties of POSS side group can tailor an extensive network of deep traps in the interfacial region with epoxy and enhance the breakdown strength of the epoxy/POSS nanocomposite.

scholarly journals The Impact of TiO2 Nanoparticle Concentration Levels on Impulse Breakdown Performance of Mineral Oil-Based Nanofluids

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 627 ◽  
Author(s):  
Ziyi Wang ◽  
You Zhou ◽  
Wu Lu ◽  
Neng Peng ◽  
Weijie Chen
Keyword(s):  
Tio2 Nanoparticles ◽  
Electric Fields ◽  
Breakdown Voltage ◽  
Concentration Level ◽  
Breakdown Strength ◽  
Mineral Oil ◽  
Interfacial Region ◽  
Bulk Oil ◽  
Lightning Impulse ◽  
The Impact

The insulation of mineral oil-based nanofluids was found to vary with different concentration level of nanoparticles. However, the mechanisms behind this research finding are not well studied. In this paper, mineral oil-based nanofluids were prepared by suspending TiO2 nanoparticles with weight percentages ranging from 0.0057% to 0.0681%. The breakdown voltage and chop time of nanofluids were observed under standard lightning impulse waveform. The experimental results show that the presence of TiO2 nanoparticles increases the breakdown voltage of mineral oil under positive polarity. The enhancement of breakdown strength tends to saturate when the concentration of nanoparticle exceeds 0.0227 wt%. Electronic traps formed at the interfacial region of nanoparticles, which could capture fast electrons in bulk oil and reduce the net density of space charge in front of prebreakdown streamers, are responsible for the breakdown strength enhancement. When the particle concentration level is higher, the overlap of Gouy–Chapman diffusion layers results in the saturation of trap density in nanofluids. Consequently, the breakdown strength of nanofluids is saturated. Under negative polarity, the electrons are likely to be scattered by the nanoparticles on the way towards the anode, resulting in enhanced electric fields near the streamer tip and the decrement of breakdown voltage.

scholarly journals Thermophysical Properties of Multifunctional Syntactic Foams Containing Phase Change Microcapsules for Thermal Energy Storage

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1790
Author(s):  
Francesco Galvagnini ◽  
Andrea Dorigato ◽  
Luca Fambri ◽  
Giulia Fredi ◽  
Alessandro Pegoretti
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Epoxy Resin ◽  
Storage Modulus ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Neat Epoxy ◽  
Low Density ◽  
Syntactic Foams

Syntactic foams (SFs) combining an epoxy resin and hollow glass microspheres (HGM) feature a unique combination of low density, high mechanical properties, and low thermal conductivity which can be tuned according to specific applications. In this work, the versatility of epoxy/HGM SFs was further expanded by adding a microencapsulated phase change material (PCM) providing thermal energy storage (TES) ability at a phase change temperature of 43 °C. At this aim, fifteen epoxy (HGM/PCM) compositions with a total filler content (HGM + PCM) of up to 40 vol% were prepared and characterized. The experimental results were fitted with statistical models, which resulted in ternary diagrams that visually represented the properties of the ternary systems and simplified trend identification. Dynamic rheological tests showed that the PCM increased the viscosity of the epoxy resin more than HGM due to the smaller average size (20 µm vs. 60 µm) and that the systems containing both HGM and PCM showed lower viscosity than those containing only one filler type, due to the higher packing efficiency of bimodal filler distributions. HGM strongly reduced the gravimetric density and the thermal insulation properties. In fact, the sample with 40 vol% of HGM showed a density of 0.735 g/cm3 (−35% than neat epoxy) and a thermal conductivity of 0.12 W/(m∙K) (−40% than neat epoxy). Moreover, the increase in the PCM content increased the specific phase change enthalpy, which was up to 68 J/g for the sample with 40 vol% of PCM, with a consequent improvement in the thermal management ability that was also evidenced by temperature profiling tests in transient heating and cooling regimes. Finally, dynamical mechanical thermal analysis (DMTA) showed that both fillers decreased the storage modulus but generally increased the storage modulus normalized by density (E′/ρ) up to 2440 MPa/(g/cm3) at 25 °C with 40 vol% of HGM (+48% than neat epoxy). These results confirmed that the main asset of these ternary multifunctional syntactic foams is their versatility, as the composition can be tuned to reach the property set that best matches the application requirements in terms of TES ability, thermal insulation, and low density.

Filler concentration effect on breakdown strength and trap level of epoxy resin–Al2O3 nanocomposites

2020 ◽  
Author(s):  
Muhammad Zeeshan khan ◽  
Feipeng Wang ◽  
Aashir Waleed ◽  
Zhengyong Huang ◽  
Muhammad Arshad Shehzad Hassan ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Breakdown Strength ◽  
Concentration Effect ◽  
Filler Concentration ◽  
Trap Level

Thermal pressure coefficient of a polyhedral oligomeric silsesquioxane (POSS)-reinforced epoxy resin

2010 ◽  
Vol 116 (1) ◽  
pp. 142-146 ◽  
Author(s):  
K. Z. Win ◽  
Taskin Karim ◽  
Qingxiu Li ◽  
Sindee L. Simon ◽  
Gregory B. McKenna
Keyword(s):  
Epoxy Resin ◽  
Pressure Coefficient ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Thermal Pressure ◽  
Oligomeric Silsesquioxane

Mechanical Properties of Electrospun Carbon Nano Fiber (ECNF)/Epoxy Nanocomposites

2007 ◽  
Author(s):  
Darunee Aussawasathien ◽  
Erol Sancaktar
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Epoxy Resin ◽  
Carbon Nanofiber ◽  
Mechanical Analysis ◽  
Short Fiber ◽  
Neat Epoxy ◽  
Epoxy Nanocomposites ◽  
Cure Reaction ◽  
Fiber Aspect Ratio

Electrospun polyacrylonitrile (PAN) fiber precursor based Carbon Nanofiber (CNF) mats were produced and impregnated with epoxy resin. The mechanical properties of as-prepared nanofibers in the mat and short fiber filled epoxy nanocomposite forms were determined to demonstrate the effect of fiber aspect ratio and interconnecting network on those properties. Our experimental results reveal that epoxy nanocomposites containing Electrospun Carbon Nano Fibers (ECNF) with high fiber aspect ratio and high interconnecting network in the non-woven mat form yield better mechanical properties than those filled with short ECNFs. The ECNF mat in epoxy nanocomposites provides better homogeneity, more interlocking network, and easier preparation than short ECNFs. Mechanical properties of ECNF mat-epoxy nanocomposites, which we obtained using tensile and flexural tests, such as stiffness and modulus increased, while toughness and flexural strength decreased, compared to the neat epoxy resin. Dynamic Mechanical Analysis (DMA) results showed, higher modulus for ECNF mat-epoxy nanocomposites, compared to those for neat epoxy resin and short ECNF-epoxy nanocomposites. The epoxy nanocomposites had high modulus, even though the glass transition temperature, Tg values dropped at some extents of ECNF mat contents when compared with the neat epoxy resin. The cure reaction was retarded since the amount of epoxy and hardener decreased at high ECNF contents together with the hindering effect of the ECNF mat to the diffusion of epoxy resin and curing agent, leading to low crosslinking efficiency.

Sign in / Sign up

Export Citation Format

Share Document