scholarly journals Soiling Effect Mitigation Obtained by Applying Transparent Thin-Films on Solar Panels: Comparison of Different Types of Coatings

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 964
Author(s):  
Małgorzata Rudnicka ◽  
Ewa Klugmann-Radziemska
Keyword(s):  
Thin Films ◽  
Working Conditions ◽  
Agricultural Crops ◽  
Solar Panels ◽  
Soil Composition ◽  
Gradual Reduction ◽  
Hydrophobic Coatings ◽  
Transparent Films ◽  
Different Types ◽  
Over Time

Dust accumulation on the front cover of solar panels is closely linked to location and orientation of photovoltaic (PV) installation. Its build-up depends on the module tilt angle, frequency of precipitation, humidity, wind strength and velocity, as well as grain size. Additionally, soil composition is determined by solar farm surroundings such as local factories, agricultural crops, and traffic. Over time, molecules of atmospheric dust agglomerate on top of each other and cause gradual reduction in generated energy. Manual cleaning techniques are required to restore working conditions of PV installation to their original conditions; however, they are time consuming and may lead to damage of the glass coverage. Therefore, implementing a different approach by utilizing self-cleaning and anti-dust coatings on front covers of module surfaces is thought of as a competitive manner of cleansing. Based on the varying properties of such thin-films, a division was made into hydrophobic, hydrophilic, and anti-dust coatings. In this article, the authors would like to present a comprehensive review of those types of transparent films. Moreover, a few hydrophobic coatings available on the Polish market were analyzed by applying them on glass tiles and covering them with three types of dust.

Morphological transformations in solution-cast Styrene-Butadiene-Styrene (SBS) triblock copolymer thin films

1995 ◽  
Vol 53 ◽  
pp. 184-185
Author(s):  
Ginam Kim ◽  
W. Marsillo ◽  
M. Libera
Keyword(s):  
Thin Films ◽  
Triblock Copolymer ◽  
Annealing Treatment ◽  
Minor Component ◽  
Solvent Evaporation ◽  
Single Crystal Substrate ◽  
Transparent Films ◽  
Crystal Substrate ◽  
Solution Cast ◽  
Morphological Transformations

The fact that block copolymers can assume a range of morphologies depending upon such variables as relative block length and molecular weight is now well known. In the case of poly(styrene)[PS]-poly(butadiene)[PB]-poly(styrene) (SBS) triblock copolymer, the morphologies range from spheres (roughly ~20% minor component), to cylinders (roughly 20%~35% minor component), to lamellae (roughly equal component fractions) Most recently, there has been increasing interest in transformations between morphologies by thermal annealing. This paper describes initial results studying the effect of solvent evaporation rate and post-casting annealing treatment on the morphology of SBS thin films.TEM specimens were prepared by solution casting electron transparent films. 50 μl of 0.1 wt% SBS (30% styrene, Mw=14,000, Scientific Polymer Products, Inc.) dissolved in toluene was deposited on a polished NaCl single crystal substrate placed in a small dish. After solvent evaporation the film was cut into small squares, floated from the salt in water, and each square was collected on a Cu grid.

Electron microscopic characterization of diamond thin films and substrates for diamond heteroepitaxial growth

1989 ◽  
Vol 47 ◽  
pp. 592-593
Author(s):  
J.B. Posthill ◽  
R.P. Burns ◽  
R.A. Rudder ◽  
Y.H. Lee ◽  
R.J. Markunas ◽  
...  
Keyword(s):  
Thin Films ◽  
Wide Band ◽  
Deposition Process ◽  
Heteroepitaxial Growth ◽  
Electron Microscopic ◽  
Wide Band Gap ◽  
Lattice Matching ◽  
Different Types ◽  
Diamond Thin Films

Because of diamond’s wide band gap, high thermal conductivity, high breakdown voltage and high radiation resistance, there is a growing interest in developing diamond-based devices for several new and demanding electronic applications. In developing this technology, there are several new challenges to be overcome. Much of our effort has been directed at developing a diamond deposition process that will permit controlled, epitaxial growth. Also, because of cost and size considerations, it is mandatory that a non-native substrate be developed for heteroepitaxial nucleation and growth of diamond thin films. To this end, we are currently investigating the use of Ni single crystals on which different types of epitaxial metals are grown by molecular beam epitaxy (MBE) for lattice matching to diamond as well as surface chemistry modification. This contribution reports briefly on our microscopic observations that are integral to these endeavors.

Intra-sectoral and Intersectoral Parity Issues in Pricing of Agricultural Crops: A Preliminary Analysis

1987 ◽  
Vol 26 (4) ◽  
pp. 401-417
Author(s):  
Sarfraz K. Qureshi
Keyword(s):  
Preliminary Analysis ◽  
Agricultural Sector ◽  
Terms Of Trade ◽  
Agricultural Crops ◽  
Allocation Of Resources ◽  
Price Determination ◽  
Policy Makers ◽  
The Government ◽  
Distribution Of Income ◽  
Over Time

Intersectoral terms of trade play a cruc1al role in determining the sectoral distribution of income and resource allocation in the developing countries. The significance of intra-sectoral terms of trade for the allocation of resources within the agricultural sector is also widely accepted by research scholars and policy-makers. In the context of planned development, the government specifies production targets for the agricultural sector and for different crops. The intervention of government in the field of price determination has important implications for the achievement of planned targets. In Pakistan, there is a feeling among many groups including farmers and politicians with a rural background that prices of agricultural crops have not kept their parities intact over time and that prices generally do not cover the costs of production. The feeling that production incentives for agriculture have been eroded is especially strong for the period since the early 1970s. It is argued that strong inflationary pressures supported by a policy of withdrawal of government subsidies on agricultural inputs have resulted in rapid increases in the prices paid by agriculturists and that increases in the prices received by farmers were not enough to compensate them for the rising prices of agricultural inputs and consumption goods.

Measuring Agency Change Across the Domain of Hypnosis

2019 ◽  
Author(s):  
Vince Polito ◽  
Amanda Barnier ◽  
Erik Woody
Keyword(s):  
Rating Scale ◽  
Sense Of Agency ◽  
Pass Rates ◽  
Current Experiment ◽  
Multidimensional Construct ◽  
Time Points ◽  
Hypnotic Induction ◽  
Different Types ◽  
Over Time ◽  
Postexperimental Inquiry

Building on Hilgard’s (1965) classic work, the domain of hypnosis has been conceptualised by Barnier, Dienes, and Mitchell (2008) as comprising three levels: (1) classic hypnotic items, (2) responding between and within items, and (3) state and trait. The current experiment investigates sense of agency across each of these three levels. Forty-six high hypnotisable participants completed an ideomotor (arm levitation), a challenge (arm rigidity) and a cognitive (anosmia) item either following a hypnotic induction (hypnosis condition) or without a hypnotic induction (wake condition). In a postexperimental inquiry, participants rated their feelings of control at three time points for each item: during the suggestion, test and cancellation phases. They also completed the Sense of Agency Rating Scale (Polito, Barnier, & Woody, 2013) for each item. Pass rates, control ratings, and agency scores fluctuated across the different types of items and for the three phases of each item; also, control ratings and agency scores often differed across participants who passed versus failed each item. Interestingly, whereas a hypnotic induction influenced the likelihood of passing items, it had no direct effect on agentive experiences. These results suggest that altered sense of agency is not a unidimensional or static quality “switched on” by hypnotic induction, but a dynamic multidimensional construct that varies across items, over time and according to whether individuals pass or fail suggestions.

Imagery in the Book of Revelation

2020 ◽  
pp. 52-67
Author(s):  
Konrad Huber
Keyword(s):  
Reception History ◽  
Book Of Revelation ◽  
Imperial Cult ◽  
Emotional Effect ◽  
Greco Roman ◽  
Different Types ◽  
Figurative Speech ◽  
Theological Message ◽  
Over Time ◽  
The Way

The chapter first surveys different types of figurative speech in Revelation, including simile, metaphor, symbol, and narrative image. Second, it considers the way images are interrelated in the narrative world of the book. Third, it notes how the images draw associations from various backgrounds, including biblical and later Jewish sources, Greco-Roman myths, and the imperial cult, and how this enriches the understanding of the text. Fourth, the chapter looks at the rhetorical impact of the imagery on readers and stresses in particular its evocative, persuasive, and parenetic function together with its emotional effect. And fifth, it looks briefly at the way reception history shows how the imagery has engaged readers over time. Thus, illustrated by numerous examples, it becomes clear how essentially the imagery of the book of Revelation constitutes and determines its theological message.

scholarly journals Bacterial contamination control mats: a comparative study

1977 ◽  
Vol 79 (1) ◽  
pp. 133-140 ◽  
Author(s):  
H. M. Meddick
Keyword(s):  
Comparative Study ◽  
Working Conditions ◽  
Bacterial Contamination ◽  
Contamination Control ◽  
Different Types

SUMMARYThe ability of six different types of contamination control mats currently in use at the entrances to theatre suites and other clean areas to remove bacteria-carrying particles from theatre trolley wheels was compared. Marked differences in the effectiveness of this property were obtained; and all mats showed some disadvantages. Modification of one of the mats has resulted in improved efficiency under working conditions.

scholarly journals Effect of scent on comfort of aircraft passengers

Work ◽  
2021 ◽  
Vol 68 (s1) ◽  
pp. S273-S280
Author(s):  
Xinhe Yao ◽  
Yu Song ◽  
Peter Vink
Keyword(s):  
Completion Time ◽  
Aircraft Cabin ◽  
Different Types ◽  
The Relationship ◽  
Over Time

BACKGROUND: Scents may influence the perceived comfort of an environment. There are only a few studies conducted on the relationship between scent and comfort in aircraft cabin. OBJECTIVES: The goal of this research is to explore whether relationships between scents and perceived comfort can be found for passengers in an aircraft cabin. METHODS: 276 participants joined an experiment in a Boeing 737 fuselage. The participants were divided into nine groups and each joined a session for 60 minutes with the exposure to different scents. The effect of the odor was measured by a set of questionnaires at the beginning and at the end of the session. Results of questionnaires were analyzed regarding the effects on the completion time, of the type of scents, of the intensity of the scent and on gender. RESULTS: Significant differences were found at the beginning and at the end of the experiment regarding comfort and emotion, but sometimes no relations could be established. The influence of different scents on comfort/discomfort varied and changed over time. However, in all scenarios, participant’ scores on emotion decreased. Additionally, the added scents influenced the linearity between the changes in comfort and discomfort. CONCLUSIONS: Smell could influence the perceived comfort/discomfort of aircraft passengers over time, and different types of smells have different effects on passengers. The preferences on scents are diverse, which highlights the need for personalization in aircraft cabin design.

Canadian Exceptionalism: Explaining Differences over Time in Provincial and Federal Voter Turnout

2001 ◽  
Vol 34 (2) ◽  
pp. 299-319 ◽  
Author(s):  
Donley T. Studlar
Keyword(s):  
Regression Analysis ◽  
Population Density ◽  
Multiple Regression Analysis ◽  
Voter Turnout ◽  
The Political ◽  
Federal Level ◽  
Industrial Democracies ◽  
Different Types ◽  
Over Time ◽  
Cross National

Canada is unusual among advanced industrial democracies in having some provinces which regularly have greater voter turnouts for provincial than for federal elections. Provincial and federal turnouts by province in Canada are analyzed for the 1945-1998 period using multiple regression analysis, both for each set of elections and by comparing differences between the two. Federal turnout has declined over the years but provincial turnout appears to have increased slightly. Although the effects found here largely confirm previous findings about the relative effects of different types of variables found for the Canadian federal level only, several of the political explanations previously supported in cross-national research find less support. Instead, region, population density, months since the last federal or provincial election, and season of the year generally have greater and sometimes more consistent effects. This suggests the need for more studies of turnout in democracies at sub-central levels.

scholarly journals Double flow reversal in thin liquid films driven by megahertz-order surface vibration

2014 ◽  
Vol 470 (2169) ◽  
pp. 20130765 ◽  
Author(s):  
Amgad R. Rezk ◽  
Ofer Manor ◽  
Leslie Y. Yeo ◽  
James R. Friend
Keyword(s):  
Thin Films ◽  
Acoustic Waves ◽  
Surface Acoustic Waves ◽  
Intermolecular Forces ◽  
Liquid Films ◽  
Thin Liquid Films ◽  
Propagation Direction ◽  
Flow Reversal ◽  
Order Surface ◽  
Over Time

Arising from an interplay between capillary, acoustic and intermolecular forces, surface acoustic waves (SAWs) are observed to drive a unique and curious double flow reversal in the spreading of thin films. With a thickness at or less than the submicrometre viscous penetration depth, the film is seen to advance along the SAW propagation direction, and self-similarly over time t 1/4 in the inertial limit. At intermediate film thicknesses, beyond one-fourth the sound wavelength λ ℓ in the liquid, the spreading direction reverses, and the film propagates against the direction of the SAW propagation. The film reverses yet again, once its depth is further increased beyond one SAW wavelength. An unstable thickness region, between λ ℓ /8 and λ ℓ /4, exists from which regions of the film either rapidly grow in thickness to exceed λ ℓ /4 and move against the SAW propagation, consistent with the intermediate thickness films, whereas other regions decrease in thickness below λ ℓ /8 to conserve mass and move along the SAW propagation direction, consistent with the thin submicrometre films.

Sign in / Sign up

Export Citation Format

Share Document