scholarly journals Effect of High-Dispersible Graphene on the Strength and Durability of Cement Mortars

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 915
Author(s):  
Xiaoqiang Qi ◽  
Sulei Zhang ◽  
Tengteng Wang ◽  
Siyao Guo ◽  
Rui Ren
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Cement Mortar ◽  
Chloride Ion ◽  
Cementitious Materials ◽  
Chloride Ion Penetration ◽  
Cement Mortars ◽  
Strength And Durability ◽  
Durability Performance

Graphene’s outstanding properties make it a potential material for reinforced cementitious composites. However, its shortcomings, such as easy agglomeration and poor dispersion, severely restrict its application in cementitious materials. In this paper, a highly dispersible graphene (TiO2-RGO) with better dispersibility compared with graphene oxide (GO) is obtained through improvement of the graphene preparation method. In this study, both GO and TiO2-RGO can improve the pore size distribution of cement mortars. According to the results of the mercury intrusion porosity (MIP) test, the porosity of cement mortar mixed with GO and TiO2-RGO was reduced by 26% and 40%, respectively, relative to ordinary cement mortar specimens. However, the TiO2-RGO cement mortars showed better pore size distribution and porosity than GO cement mortars. Comparative tests on the strength and durability of ordinary cement mortars, GO cement mortars, and TiO2-RGO cement mortars were conducted, and it was found that with the same amount of TiO2-RGO and GO, the TiO2-RGO cement mortars have nearly twice the strength of GO cement mortars. In addition, it has far higher durability, such as impermeability and chloride ion penetration resistance, than GO cement mortars. These results indicate that TiO2-RGO prepared by titanium dioxide (TiO2) intercalation can better improve the strength and durability performance of cement mortars compared to GO.

scholarly journals Experimental investigation of frost induced damage of cement mortar

2019 ◽  
Vol 282 ◽  
pp. 02103
Author(s):  
Alicja Wieczorek ◽  
Marcin Koniorczyk ◽  
Kalina Grabowska
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Cement Mortar ◽  
Cement Matrix ◽  
Capillary Absorption ◽  
Water Absorption Coefficient ◽  
Cement Mortars ◽  
Water Saturated ◽  
The Impact

Questions connected to influence of frost degradation on microstructure and physical properties of water saturated cement mortars and their resistance to cyclic water freezing are the objectives of research. The main aim of the investigation is to analyze the ice-induced deterioration of cement mortars with different water/cement ratios (w/c=0.50 and 0.40) in a accelerated durability tests. The changes of pore size distribution and water absorption coefficient are investigated by means of mercury intrusion porosimetry and capillary absorption test. Additionally, the analysis of the impact of drying temperature (40°C, 60°C, 80°C and 105°C) on the microstructure is introduced.The performed tests enabled to estimate that the destruction of the cement matrix and the range of observed changes depend on the initial pore size distribution and their volume in the cement matrix. It is also established that the increase of transport properties is correlated with the change of pore size distribution. The obtained results allow to conclude a decrease of content of small pores (up to 150nm) and increase of larger pores for mortar with w/c=0.50. Application of superplasticizer, which resulting in reduction of water to cement ratio up to 0.40, allows to obtained resistant to 150 frost cycles cement mortar.

scholarly journals Ink-bottle Effect and Pore Size Distribution of Cementitious Materials Identified by Pressurization–Depressurization Cycling Mercury Intrusion Porosimetry

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1454 ◽  
Author(s):  
Yong Zhang ◽  
Bin Yang ◽  
Zhengxian Yang ◽  
Guang Ye
Keyword(s):  
Pore Structure ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Mercury Intrusion Porosimetry ◽  
Cementitious Materials ◽  
Limestone Powder ◽  
Accurate Estimation ◽  
Mercury Intrusion ◽  
Pore Size Distributions

Capturing the long-term performance of concrete must be underpinned by a detailed understanding of the pore structure. Mercury intrusion porosimetry (MIP) is a widely used technique for pore structure characterization. However, it has been proven inappropriate to measure the pore size distribution of cementitious materials due to the ink-bottle effect. MIP with cyclic pressurization–depressurization can overcome the ink-bottle effect and enables a distinction between large (ink-bottle) pores and small (throat) pores. In this paper, pressurization–depressurization cycling mercury intrusion porosimetry (PDC-MIP) is adopted to characterize the pore structure in a range of cementitious pastes cured from 28 to 370 days. The results indicate that PDC-MIP provides a more accurate estimation of the pore size distribution in cementitious pastes than the standard MIP. Bimodal pore size distributions can be obtained by performing PDC-MIP measurements on cementitious pastes, regardless of the age. Water–binder ratio, fly ash and limestone powder have considerable influences on the formation of capillary pores ranging from 0.01 to 0.5 µm.

scholarly journals POROSIMETRY BY RANDOM NODE STRUCTURING IN VIRTUAL CONCRETE

2012 ◽  
Vol 31 (2) ◽  
pp. 79 ◽  
Author(s):  
Piet Stroeven ◽  
Nghi L.B. Le ◽  
Lambertus J Sluys ◽  
Huan He
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Pore Space ◽  
Cementitious Materials ◽  
Discrete Element Modeling ◽  
Concurrent Algorithm ◽  
Random Node ◽  
Volume Measurements ◽  
3D Information

Two different porosimetry methods are presented in two successive papers. Inspiration for the development came from the rapidly-exploring random tree (RRT) approach used in robotics. The novel methods are applied to virtual cementitious materials produced by a modern concurrent algorithm-based discrete element modeling system, HADES. This would render possible realistically simulating all aspects of particulate matter that influence structure-sensitive features of the pore network structure in maturing concrete, namely size, shape and dispersion of the aggregate and cement particles. Pore space is a complex tortuous entity. Practical methods conventionally applied for assessment of pore size distribution may fail or present biased information. Among them, mercury intrusion porosimetry and 2D quantitative image analysis are popular. The mathematical morphology operator “opening” can be applied to sections and even provide 3D information on pore size distribution, provided isotropy is guaranteed. However, aggregate grain surfaces lead to anisotropy in porosity. The presented methods allow exploration of pore space in the virtual material, after which pore size distribution is derived from star volume measurements. In addition to size of pores their continuity is of crucial importance for durability estimation. Double-random multiple tree structuring (DRaMuTS), introduced earlier in IA&S (Stroeven et al., 2011b) and random node structuring (RaNoS) provide such information.

Sign in / Sign up

Export Citation Format

Share Document