scholarly journals Mineral Addition and Mixing Methods Effect on Recycled Aggregate Concrete

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 907
Author(s):  
Hasan Dilbas ◽  
Mehmet Şamil Güneş
Keyword(s):  
Strength Class ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Target Strength ◽  
Test Results ◽  
Comparison Analysis ◽  
Aggregate Concrete ◽  
Mineral Addition ◽  
Absolute Volume ◽  
Volume Method

This paper presents influence of treatment and mixing methods on recycled aggregate concretes (RAC) designed regarding various techniques. Absolute Volume Method (AVM) according to TS 802, Equivalent Mortar Volume Method (EMV), silica fume (SF) as a mineral addition were considered in the design of concretes. In total, four groups of concretes were produced in the laboratory: (1) natural aggregate concrete (NAC) designed with AVM as control concrete, (2) RAC designed with AVM as control RAC, (3) RAC with SF as a mineral addition designed with AVM as treated RAC and (4) RAC designed with EMV as treated RAC. The tests were performed at 28th days and the statistical analysis were made on the test results. According to the results, EMV and SF increased the compressive strength of concretes and this resulted an increase in the strength class of concrete. A significant statistical difference between the concretes were determined. According to multiple comparison analysis, it was found that especially there was a significant relationship among NAC, RAC and RAC-EMV. In addition, it was recommended that EMV and AVM with 5% SF could be used in the design of RAC rather than AVM only to achieve the target strength class C30/37.

PROPERTIES OF CONCRETE MADE WITH RECYCLED COARSE AGGREGATES FROM OLD CONCRETE CUBES

2015 ◽  
Vol 2 (1) ◽  
Author(s):  
I. H. Adebakin ◽  
J. T. Adu ◽  
O. M. Ofuyatan
Keyword(s):  
Compressive Strength ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Low Grade ◽  
Aggregate Concrete ◽  
Coarse Aggregates ◽  
Natural Aggregate ◽  
Absolute Volume ◽  
Close Proximity ◽  
Volume Method

Sustainability in the construction industry is a global concern, and one way of handling this is the idea of recycling old concrete rubbles in the production of fresh concrete. Recycled aggregate concrete is normally classified as light weight concrete and recommended for use in production of low-grade non-structural elements. This study examined the properties of crushed old concrete cubes as replacement for natural aggregate. Five specimens 150x150mm concrete cubes with varying percentages of coarse recycled aggregate of 0 %( control), 25, 50, 75 and 100% were prepared. All the mixes were proportioned using the absolute volume method with a targeted compressive strength of 30N/mm2 and varying w/c ratio. The result shows that with up to 75% replacement of natural aggregate with recycled aggregate, the 28 days compressive strength of concrete is in close proximity with that of normal concrete. While the strength of exclusive recycled aggregate concrete is about 15% lesser than that of exclusive natural aggregate. The result of this research confirms that crushed old concrete cubes can be safely used in the production of high grade concrete.

Study on the Basic Mechanical Properties of Recycled Concrete Hollow Block Masonry

2013 ◽  
Vol 438-439 ◽  
pp. 749-755 ◽  
Author(s):  
Tong Hao ◽  
Dong Li
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Shear Behavior ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Aggregate Concrete ◽  
Mortar Strength ◽  
Hollow Block

By the experimental studying on the basic mechanical properties of recycled concrete hollow block masonry, the compressive and shear behavior of recycled aggregate concrete hollow block masonry under different mortar strength were analyzed. Research indicated that the compressive and shear behavior of recycled aggregate concrete hollow block masonry was similar to that of ordinary concrete hollow block masonry. The normal formula was recommended to calculate the compressive strength of the masonry. The shear strength of the masonry was affected by the mortar strength. The shear strength calculation formula of recycled concrete hollow block masonry was proposed according to the formula of masonry design code. The calculating results were in good agreement with the test results.

scholarly journals Quality Improvement of Recycled Aggregate Concrete using Six Sigma DMAIC Methodology

2020 ◽  
Vol 5 (6) ◽  
pp. 1409-1419
Author(s):  
Suhas Vijay Patil ◽  
Balakrishna Rao K. ◽  
Gopinatha Nayak
Keyword(s):  
Six Sigma ◽  
Coarse Aggregate ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Lower Grade ◽  
Test Results ◽  
Aggregate Concrete ◽  
Recycled Coarse Aggregate ◽  
Concrete Mix

Recycled aggregates (RA) are obtained from construction and demolished waste, laboratory crushed concrete and concrete waste at RMC plants. The concrete made from recycled aggregate is known as recycled aggregate concrete. The use of recycled aggregate is very beneficial to the environment in civil works. Its usage also helps in financial saving as the cost of transportation and production energy cost of natural coarse aggregate (NCA) is reduced. In India, the recycled aggregate application in lower grade concrete work is observed. However, the effect of recycled aggregate on the strength and durability of concrete restricts its use in higher-grade work. This paper presents a series of tests carried out on recycled coarse aggregate (RCA) and recycled coarse aggregate concrete (RCAC) and test results are compared with the NCA and parent concrete made from NCA. Tests were carried out as per IS code and concrete was prepared using a two-stage mixing approach in the concrete mix design. M30 concrete mix of four RCAC samples was tested at 28 days of curing and in comparison with parent concrete, it is found that on an average compressive strength is decreased by 12.89% at 28 days curing. Adhered mortar increases the porosity of the recycled aggregate and forms a weak zone between aggregate surface and mortar. In addition, test results showed the defects in recycled aggregate and helped to identify the area where concentration is necessary to improve the quality of recycled aggregate using six sigma DMAIC methodology. Total of 12 defects were found in the process and raw material. Statistical analysis was used to evaluate the performance of all the mix made with RCA.

Properties of Recycled Aggregate Concrete Filled Steel Tubes

2014 ◽  
Vol 1065-1069 ◽  
pp. 1323-1326
Author(s):  
Yi Jie Huang ◽  
Huang Sheng Sun
Keyword(s):  
Mechanical Behavior ◽  
Steel Tube ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Structural Elements ◽  
Steel Tubes ◽  
Aggregate Concrete ◽  
Flexural Performance ◽  
Concrete Filled Steel Tubes

A review on the properties of recycled aggregate concrete filled steel tubes (RACSFT) was presented, followed by the short overview on the related researches. The uniaxial mechanical behavior, flexural performance, creep performance as well as eccentric loaded behavior of RACSFT specimens were discussed. It was found that the differences between the element made of recycled aggregate concrete (RAC) and that of natural aggregate concrete (NAC) could not be ignored. The performance of the RACFST is inferior to that of natural concrete filled steel tube (CFST). But, the RACSFT can be applied into structural elements safely. Based on the test results, it was also concluded that the RACSFT is an effective method to improve the application of RAC.

scholarly journals Elasto-Damage Constitutive Modelling of Recycled Aggregate Concrete

2020 ◽  
Vol 7 ◽  
Keyword(s):  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Percentage Increase ◽  
Test Results ◽  
Conventional Concrete ◽  
Critical Energy Release Rate ◽  
Aggregate Concrete ◽  
Finite Element Software ◽  
Concrete Model

Use of recycled aggregates in concrete has proved to be beneficial in attaining sustainable construction without compromising overall material and structural performance when compared with concrete containing natural aggregates. However, use of the recycled aggregates in concrete have resulted in reduction in compressive and tensile strengths with the recycled aggregates percentage increase in concrete. Furthermore, it is important to note that most of the finite element software used in the construction industry use concrete model derived from the test results of the conventional concrete, therefore, they may not always predict safe solution for recycled aggregates concrete (RAC). Therefore, in this investigation elasto-damage, proposed by Khan and Zahra, for natural aggregate concrete (NAC) was modified to incorporate the influence of recycled aggregates on the behaviour of concrete. Model use four parameters α, β, γ critical energy release rate (Rc) to predict the behaviour of recycled aggregate concrete for multi axial stress states. Parameters α, β and γ are used to predict the different behavior of concrete in tension and compression while Rc controls the damage growth rate. These parameters are defined as a function of concrete compressive strength (fc/) and its initial elastic modulus (Eo). Existing test results for uniaxial compressive state of stress were used to validate this model and it was found that it predicts better post cracking and post peak-behaviour of RAC as compared to the commercially available models for conventional concrete

scholarly journals Utilization of Demolished Waste as Coarse Aggregate in Concrete

2019 ◽  
Vol 5 (3) ◽  
pp. 540 ◽  
Author(s):  
Abdulsamee M Halahla ◽  
Mohammad Akhtar ◽  
Amin H. Almasri
Keyword(s):  
Compressive Strength ◽  
Coarse Aggregate ◽  
Recycled Concrete ◽  
International Standards ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Aggregate Concrete ◽  
Natural Aggregate ◽  
Concrete Building

Demolishing concrete building usually produces huge amounts of remains and wastes worldwide that have promising possibilities to be utilized as coarse aggregate for new mixes of concrete. High numbers of structures around the world currently need to be removed for several reasons, such as reaching the end of the expected life, to be replaced by new investments, or were not built by the local and international standards. Maintaining or removal of such structures leads to large quantities of concrete ruins. Reusing these concrete wastes will help in saving landfill spaces in addition to more sustainability in natural resources. The objective of this study is to investigate the possibility of using old recycled concrete as coarse aggregate to make new concrete mixes, and its effect on the evolution of the compressive strength of the new concrete mixes.  Core samples for demolished concrete were tested to determine its compressive strength. The core test results can be thought of as aggregate properties for the new concrete. Then, the compressive strength and splitting tensile strength of the new recycled aggregate concrete (RAC) were determined experimentally by casting a cubes and cylinders, respectively. It was found that the evolution of compressive strength of recycled aggregate concrete is similar in behavior to the concrete with natural aggregate, except that it is about 10% lower in values. It was also seen that water absorption for recycled aggregate is noticeably higher than that for natural aggregate, and should be substituted for in the mix design.

scholarly journals Mechanical Property Tests and Strength Formulas of Basalt Fiber Reinforced Recycled Aggregate Concrete

Materials ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 1851 ◽  
Author(s):  
Sheng-En Fang ◽  
Hua-Shan Hong ◽  
Pei-Hui Zhang
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Failure Modes ◽  
Volume Fraction ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Test Results ◽  
Fiber Reinforced ◽  
Aggregate Concrete ◽  
Volume Fractions

In order to investigate the influence of basalt fibers (BFs) on the mechanical performance of recycled aggregate concrete (RAC), some groups of RAC specimens were first tested involving different types of fibers such as carbon fibers, steel fibers, polypropylene fibers and hybrid fibers. The main four indices for the investigation consisted of cube compressive strengths, axial compressive strengths, splitting tensile strengths and Young’s modulus. The effects of fiber volume fractions on the RAC slumps were also discussed. Meanwhile, the mechanical properties and failure modes of the BF-reinforced RAC were compared with those of other fiber-reinforced RAC and common concrete (CC). Subsequently the optimal volume fractions of BFs were explored for different mechanical properties within the volume fraction range of 0–0.2%. The back propagation neural networks were further applied to predict and validate the optimal BF fractions. Lastly, the general strength formulas, as well as the elastic modulus formula, for BF-reinforced RAC were deducted based on the specimen test results. It is found that the addition of fibers may improve the failure modes of RAC and different fibers present positive or negative effects on the mechanical properties. The optimal volume fractions of BF with respect to the four mechanical indices are 0.1%, 0.15%, 0.1% and 0.2% respectively. The proposed strength and elastic modulus formulas of BF-reinforced RAC provide satisfactory predictions with the test results and thus can be used as a reference in practice.

scholarly journals Prediction of Shear Strength of Reinforced Recycled Aggregate Concrete Beams without Stirrups

Buildings ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 402
Author(s):  
Monthian Setkit ◽  
Satjapan Leelatanon ◽  
Thanongsak Imjai ◽  
Reyes Garcia ◽  
Suchart Limkatanyu
Keyword(s):  
Shear Strength ◽  
Shear Failure ◽  
Concrete Beams ◽  
Reduction Factor ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Shear Stresses ◽  
Test Results ◽  
Aggregate Concrete ◽  
Effective Depth

For decades, recycled coarse aggregate (RCA) has been used to make recycled aggregate concrete (RAC). Numerous studies have compared the mechanical properties and durability of recycled aggregate concrete (RAC) to those of natural aggregate concrete (NAC). However, test results on the shear strength of reinforced recycled aggregate concrete beams are still limited and sometimes contradictory. Shear failure is generally brittle and must be prevented. This article studies experimentally and analytically the shear strength of reinforced RAC beams without stirrups. Eight RAC beams and two controlled NAC beams were tested under the four-point flexural test with the shear span-to-effective depth ratio (a/d) of 3.10. The main parameters investigated were the replacement percentage of RCA (0%, 25%, 50%, 75%, and 100%) and longitudinal reinforcement ratio (ρw) of 1.16% and 1.81%. It was found that the normalized shear stresses of RAC beams with ρw = 1.81% at all levels of replacement percentage were quite similar to those of the NAC counterparts. Moreover, the normalized shear stress of the beam with 100% RCA and ρw = 1.16% was only 6% lower than that of the NAC beam. A database of 128 RAC beams without shear reinforcement from literature was analyzed to evaluate the accuracy of the ACI 318-19 shear provisions in predicting the shear strength of the beams. For an RCA replacement ratio of between 50% and 100%, it was proposed to apply a reduction factor of 0.75 to the current ACI code equation to account for the physical variations of RCA, such as replacement percentage, RCA source and quality, density, amount of residual mortar, and physical irregularity.

Sign in / Sign up

Export Citation Format

Share Document