scholarly journals Characterization of Graphite Oxide and Reduced Graphene Oxide Obtained from Different Graphite Precursors and Oxidized by Different Methods Using Raman Spectroscopy Statistical Analysis

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 769
Author(s):  
Roksana Muzyka ◽  
Sabina Drewniak ◽  
Tadeusz Pustelny ◽  
Marcin Sajdak ◽  
Łukasz Drewniak
Keyword(s):  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
Statistical Analysis ◽  
Reduced Graphene Oxide ◽  
Graphite Oxide ◽  
Photoelectron Spectroscopy ◽  
Graphene Oxides ◽  
Preparation Methods ◽  
X Ray ◽  
Reduced Graphene

In this paper, various graphite oxide (GO) and reduced graphene oxide (rGO) preparation methods are analyzed. The obtained materials differed in their properties, including (among others) their oxygen contents. The chemical and structural properties of graphite, graphite oxides, and reduced graphene oxides were previously investigated using Raman spectroscopy (RS), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD). In this paper, hierarchical clustering analysis (HCA) and analysis of variance (ANOVA) were used to trace the directions of changes of the selected parameters relative to a preparation method of such oxides. We showed that the oxidation methods affected the physicochemical properties of the final products. The aim of the research was the statistical analysis of the selected properties in order to use this information to design graphene oxide materials with properties relevant for specific applications (i.e., in gas sensors).

Reduced Graphene Oxide Supported Molybdenum Oxide Hybrid Nanocomposites: High Performance Electrode Material for Supercapacitor and Photocatalytic Applications

2020 ◽  
Vol 20 (7) ◽  
pp. 4035-4046
Author(s):  
Rengasamy Dhanabal ◽  
Dhanasekaran Naveena ◽  
Sivan Velmathi ◽  
Arumugam Chandra Bose
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Hybrid Nanocomposites ◽  
X Ray ◽  
Supercapacitor Application ◽  
Quenching Effect ◽  
Reduced Graphene

Using a simple solution based synthesis route, hexagonal MoO3 (h-MoO3) nanorods on reduced graphene oxide (RGO) sheets were prepared. The structure and morphology of resulting RGO-MoO3 nanocomposite were characterized using X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), transmission electron microscopy (TEM) and field emission scanning electron microscopy (FESEM). The optical property was studied using UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS) and photoluminescence spectroscopy (PL). The RGO-MoO3 nanocomposites were used as an electrode for supercapacitor application and photocatalyst for photodegradation of methylene blue (MB) and rhodamine B (RhB) under visible light irradiation. We demonstrated that the RGO-MoO3 electrode is capable of delivering high specific capacitance of 134 F/g at current density of 1 A/g with outstanding cyclic stability for 2000 cycles. The RGOMoO3 photocatalyst degrades 95% of MB dye within 90 min, and a considerable recyclability up to 4 cycles was observed. The quenching effect of scavengers test confirms holes are main reactive species in the photocatalytic degradation of MB. Further, the charge transfer process between RGO and MoO3 was schematically demonstrated.

scholarly journals Effects of Different TiO2 Particle Sizes on the Microstructure and Optical Limiting Properties of TiO2/Reduced Graphene Oxide Nanocomposites

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 730 ◽  
Author(s):  
Yuyu Ren ◽  
Lili Zhao ◽  
Yang Zou ◽  
Lixin Song ◽  
Ningning Dong ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Optical Limiting ◽  
Tio2 Particle ◽  
Tetrabutyl Titanate ◽  
Particle Sizes ◽  
X Ray ◽  
Reduced Graphene ◽  
Source Materials

TiO2/reduced graphene oxide (rGO) nanocomposites with two different TiO2 particle sizes were synthesized by a facile hydrothermal method using two different source materials of Ti: tetrabutyl titanate (TBT) and commercial TiO2 powder (P25). For respective series with the same source materials, we investigated additions that optimized the nonlinear optical properties (NLO) and optical limiting (OL) performances, and we explored the relationships between structural diversity and performance. Several characterization techniques, including X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, and diffuse reflectance ultraviolet-visible spectroscopy (UV-Vis) were conducted to confirm the microstructures and chemical states of as-prepared materials. This indicated the existence of the Ti–O–C bond between rGO sheets and TiO2 particles and the reduction from precursor graphene oxide (GO) to rGO. The results of UV-Vis spectra revealed that the TiO2/rGO nanocomposites showed smaller band gaps than bare TiO2. A nanosecond open-aperture Z-scan technique at 1064 nm was applied to investigate NLO and OL properties. TiO2/rGO nanocomposites exhibited enhanced NLO and OL performances, arising from synergistic effects, compared to individual components. The TBT series samples performed better than the P25 series, presumably relevant to dimensional effects.

scholarly journals Reduced Graphene Oxide–Epoxy Grafted Poly(Styrene-Co-Acrylate) Composites for Corrosion Protection of Mild Steel

Coatings ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 666
Author(s):  
Xinchuan Fan ◽  
Yue Hu ◽  
Yijun Zhang ◽  
Jiachen Lu ◽  
Xiaofeng Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Corrosion Properties ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Scanning Electron

Reduced graphene oxide–epoxy grafted poly(styrene-co-acrylate) composites (GESA) were prepared by anchoring different amount of epoxy modified poly(styrene-co-acrylate) (EPSA) onto reduced graphene oxide (rGO) sheets through π–π electrostatic attraction. The GESA composites were characterized by Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The anti-corrosion properties of rGO/EPSA composites were evaluated by electro-chemical impedance spectroscopy (EIS) in hydroxyl-polyacrylate coating, and the results revealed that the corrosion rate was decreased from 3.509 × 10−1 to 1.394 × 10−6 mm/a.

scholarly journals Elucidating the Chemistry behind the Reduction of Graphene Oxide Using a Green Approach with Polydopamine

Nanomaterials ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 902 ◽  
Author(s):  
Cláudia Silva ◽  
Frank Simon ◽  
Peter Friedel ◽  
Petra Pötschke ◽  
Cordelia Zimmerer
Keyword(s):  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
New Approach ◽  
Oh Groups ◽  
Chemical Treatments ◽  
Green Approach ◽  
Reduced Graphene ◽  
Thermal And Electrical Properties

A new approach using X-ray photoelectron spectroscopy (XPS) was employed to give insight into the reduction of graphene oxide (GO) using a green approach with polydopamine (PDA). In this approach, the number of carbon atoms bonded to OH and to nitrogen in PDA is considered and compared to the total intensity of the signal resulting from OH groups in polydopamine-reduced graphene oxide (PDA-GO) to show the reduction. For this purpose, GO and PDA-GO with different times of reduction were prepared and characterized by Raman Spectroscopy and XPS. The PDA layer was removed to prepare reduced graphene oxide (RGO) and the effect of all chemical treatments on the thermal and electrical properties of the materials was studied. The results show that the complete reduction of the OH groups in GO occurred after 180 min of reaction. It was also concluded that Raman spectroscopy is not well suited to determine if the reduction and restoration of the sp2 structure occurred. Moreover, a significant change in the thermal stability was not observed with the chemical treatments. Finally, the electrical powder conductivity decreased after reduction with PDA, increasing again after its removal.

Facile Synthesis of Modified MnO2/Reduced Graphene Oxide Nanocomposites and their Application in Supercapacitors

NANO ◽  
2020 ◽  
Vol 15 (08) ◽  
pp. 2050099
Author(s):  
Lijun Chen ◽  
Hongfeng Yin ◽  
Yuchao Zhang ◽  
Huidong Xie
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Electrode Materials ◽  
Normal Pressure ◽  
X Ray ◽  
Assembly Method ◽  
Reduced Graphene

Herein, KH-550 was used as surface modifier to prepare modified MnO2/reduced graphene oxide (M-MnO2/rGO) composite electrode materials by utilizing electrostatic interaction at low temperature and normal pressure. X-ray diffraction, scanning electron microscopy, transmission electron microscopy and X-ray photoelectron spectroscopy were adopted to characterize the material’s phase, morphology, and valence state of elements. The electrochemical properties of the material were measured using a three-electrode system. The results indicate a decrease in the size of the modified MnO2 particles, and that they were uniformly distributed on the rGO sheets. The M-MnO2/rGO composite attained a specific capacitance of 326[Formula: see text]F[Formula: see text]g[Formula: see text] in a solution of 1[Formula: see text]mol[Formula: see text]L[Formula: see text] Na2SO4 at a current density of 0.5[Formula: see text]A[Formula: see text]g[Formula: see text]. The specific capacitance of the material was 92.4% after 1000 cycles. The electrostatic self-assembly method effectively solved the problem of reducing the cycling stability while improving the specific capacitance of the composite materials, and further improved the possibility of applying MnO2/rGO in the field of supercapacitors.

Fabrication of Nickel Sulfide/Nitrogen-Doped Reduced Graphene Oxide Nanocomposite as Anode Material for Lithium-Ion Batteries and Its Electrochemical Performance

2020 ◽  
Vol 20 (11) ◽  
pp. 6782-6787
Author(s):  
Yeon-Ju Lee ◽  
Tae-Hyun Ha ◽  
Gyu-Bong Cho ◽  
Ki-Won Kim ◽  
Jou-Hyeon Ahn ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Lithium Ion ◽  
Treatment Method ◽  
Retention Capacity ◽  
Graphene Nanocomposites ◽  
X Ray ◽  
Nitrogen Doped ◽  
Reduced Graphene

In this study, NiS/graphene nanocomposites were synthesized by simple heat treatment method of three graphene materials (graphene oxide (GO), reduced graphene oxide (rGO) and nitrogen-doped graphene oxide (N-rGO)) and NiS precursor. The morphology and crystal structure of NiS/graphene nanocomposites were characterized using field emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. Electrochemical properties were also investigated. NiS/graphene nanocomposites homogeneously wrapped by graphene materials have been successfully manufactured. Among the three nanocomposites, NiS/N-rGO nanocomposite exhibited the highest initial and retention capacity in discharge, respectively, of 1240 mAh/g and 467 mAh/g up to 100 cycles at 0.5 C.

Simplified Synthesis of 3D Flexible Reduced Graphene Oxide-Wrapped NiCo2O4 Nanowires for High-Performance Supercapacitor

2018 ◽  
Vol 10 (3) ◽  
pp. 358-364 ◽  
Author(s):  
Chao Pan ◽  
Hongyu Sun ◽  
Jingyi Gao ◽  
Yucai Hu ◽  
Jing Wang
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Current Density ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
High Current Density ◽  
Three Dimensional ◽  
Simple Method ◽  
X Ray ◽  
Reduced Graphene

We introduced a simple method to construct novel three-dimensional (3D) flexible hierarchical nanocomposites by combining (1D) NiCo2O4 nanowires with 2D reduced graphene oxide (rGO) sheets. The hierarchical nanocomposite structure of rGO-wrapped NiCo2O4 (rGO-NiCo2O4) was confirmed by X-ray diffraction (XRD), Raman spectra, scanning electron microscopy (SEM), transmission electron microscope (TEM), and X-ray photoelectron spectroscopy (XPS). The results indicated that NiCo2O4 nanowires were successfully wrapped in rGO and the morphology of the rGO-NiCo2O4 showed a three-dimensional porous structure with NiCo2O4 being homogeneously distributed in the rGO. Given their apparent advantages, these two different nanostructures were evaluated as electrodes for high-performance supercapacitors. These electrodes exhibited a high capacitance of 1824.8 F·g–1 at a current density of 0.5 A·g–1, and an excellent cycling performance extending to 5000 cycles at a high current density of 4 A·g–1. Our results clearly demonstrate that rGO sheets on NiCo2O4 nanowires can substantially improve the capacitive performance of materials and ultimately increase the cycling stability of supercapacitors. The hierarchical binary nanocomposites show excellent electrochemical properties for energy storage applications, evidencing their potential application as supercapacitors.

scholarly journals Characterization of Graphite Oxide and Reduced Graphene Oxide Obtained from Different Graphite Precursors and Oxidized by Different Methods Using Raman Spectroscopy

Materials ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1050 ◽  
Author(s):  
Roksana Muzyka ◽  
Sabina Drewniak ◽  
Tadeusz Pustelny ◽  
Maciej Chrubasik ◽  
Grażyna Gryglewicz
Keyword(s):  
Raman Spectroscopy ◽  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Graphite Oxide ◽  
Reduced Graphene

Nitrogen, Sulfur Co-Doped Reduced Graphene Oxide: Synthesis and Characterization

2020 ◽  
Vol 12 (2) ◽  
pp. 129-134
Author(s):  
Md. Abdul Mannan ◽  
Yudai Hirano ◽  
Armando T. Quitain ◽  
Michio Koinuma ◽  
Tetsuya Kida
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Photoelectron Spectroscopy ◽  
Implantation Technique ◽  
Chemical Bonds ◽  
X Ray ◽  
Reduced Graphene ◽  
Single Source Precursor ◽  
Ft Ir ◽  
Co Doped

Objective and Method: In this present research, a simple hydrothermal implantation technique for synthesizing N,S co-doped reduced graphene oxide (NS-r-GO) has been presented in which thiourea was used as a single-source precursor of N and S atoms. Results: Maximum N and S atoms, with an atomic percentage of 3.50 and 7.50 (at.%), were achieved in the GO matrix at the reaction temperature of 250°C. Introduction of N and S atoms into the GO lattice was confirmed by X-ray photoelectron spectroscopy (XPS). Different chemical bonds such as –C– S–C, C=O, N–O, and C–N–C have been suggested from the corresponding C1s, N1s, O1s, and S2p high-resolution XPS spectral analyses. Conclusion: FT-IR measurement also confirmed the presence of different functional groups as well as the formation of different bonds such as –OH, –N–H, –C=O, –C–OH, and C-S. XRD and Raman spectroscopy analyses confirmed the defects structures that arose from the penetration of N and S atoms into the GO lattice.

Sign in / Sign up

Export Citation Format

Share Document