scholarly journals Design of 3D Additively Manufactured Hybrid Structures for Cranioplasty

Materials ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 181
Author(s):  
Roberto De Santis ◽  
Teresa Russo ◽  
Julietta V. Rau ◽  
Ida Papallo ◽  
Massimo Martorelli ◽  
...  
Keyword(s):  
Physical Models ◽  
Cranial Bone ◽  
Head Model ◽  
Rigid Sphere ◽  
Element Analysis ◽  
Aliphatic Polyesters ◽  
Hybrid Device ◽  
Wide Range ◽  
Hybrid Devices ◽  
Technical Solutions

A wide range of materials has been considered to repair cranial defects. In the field of cranioplasty, poly(methyl methacrylate) (PMMA)-based bone cements and modifications through the inclusion of copper doped tricalcium phosphate (Cu-TCP) particles have been already investigated. On the other hand, aliphatic polyesters such as poly(ε-caprolactone) (PCL) and polylactic acid (PLA) have been frequently investigated to make scaffolds for cranial bone regeneration. Accordingly, the aim of the current research was to design and fabricate customized hybrid devices for the repair of large cranial defects integrating the reverse engineering approach with additive manufacturing, The hybrid device consisted of a 3D additive manufactured polyester porous structures infiltrated with PMMA/Cu-TCP (97.5/2.5 w/w) bone cement. Temperature profiles were first evaluated for 3D hybrid devices (PCL/PMMA, PLA/PMMA, PCL/PMMA/Cu-TCP and PLA/PMMA/Cu-TCP). Peak temperatures recorded for hybrid PCL/PMMA and PCL/PMMA/Cu-TCP were significantly lower than those found for the PLA-based ones. Virtual and physical models of customized devices for large cranial defect were developed to assess the feasibility of the proposed technical solutions. A theoretical analysis was preliminarily performed on the entire head model trying to simulate severe impact conditions for people with the customized hybrid device (PCL/PMMA/Cu-TCP) (i.e., a rigid sphere impacting the implant region of the head). Results from finite element analysis (FEA) provided information on the different components of the model.

Dynamic Finite Element Analysis of an Elastic-Plastic Half-Space Indented by a Rigid Sphere

2010 ◽  
Author(s):  
A. Lee ◽  
K. Komvopoulos
Keyword(s):  
Finite Element ◽  
Half Space ◽  
Equivalent Plastic Strain ◽  
Dynamic Contact ◽  
Rigid Sphere ◽  
Element Analysis ◽  
Elastic Plastic ◽  
Wide Range ◽  
Deformation Velocity ◽  
Elastic Plastic Materials

Dynamic indentation of an elastic-plastic half-space by a rigid sphere was studied with the finite element method. A parametric analysis was performed to examine the effects of indentation velocity and yield strength of the half-space material on dynamic contact deformation. Velocity effects are discussed in the context of simulation results of global and local contact parameters, such as mean contact pressure, contact area, and equivalent plastic strain. The evolution of deformation as the material response transitions from elastic to fully-plastic deformation during dynamic contact is interpreted in light of numerical results. This study elucidates the effect of dynamic contact loading on the deformation behavior of elastic-plastic materials for a wide range of length scales where a continuum mechanics description holds.

scholarly journals Two-Dimensional Numerical Modeling of Flow in Physical Models of Rock Vane and Bendway Weir Configurations

Water ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 458
Author(s):  
Drew C. Baird ◽  
Benjamin Abban ◽  
S. Michael Scurlock ◽  
Steven B. Abt ◽  
Christopher I. Thornton
Keyword(s):  
Numerical Modeling ◽  
Physical Model ◽  
Numerical Models ◽  
Hydraulic Performance ◽  
Physical Models ◽  
Protection Measures ◽  
Design Engineers ◽  
Model Study ◽  
Study Results ◽  
Wide Range

While there are a wide range of design recommendations for using rock vanes and bendway weirs as streambank protection measures, no comprehensive, standard approach is currently available for design engineers to evaluate their hydraulic performance before construction. This study investigates using 2D numerical modeling as an option for predicting the hydraulic performance of rock vane and bendway weir structure designs for streambank protection. We used the Sedimentation and River Hydraulics (SRH)-2D depth-averaged numerical model to simulate flows around rock vane and bendway weir installations that were previously examined as part of a physical model study and that had water surface elevation and velocity observations. Overall, SRH-2D predicted the same general flow patterns as the physical model, but over- and underpredicted the flow velocity in some areas. These over- and underpredictions could be primarily attributed to the assumption of negligible vertical velocities. Nonetheless, the point differences between the predicted and observed velocities generally ranged from 15 to 25%, with some exceptions. The results showed that 2D numerical models could provide adequate insight into the hydraulic performance of rock vanes and bendway weirs. Accordingly, design guidance and implications of the study results are presented for design engineers.

Improvement of the Detection Sensitivity of Edxrf Trace Element Analysis by Means of Efficient X-Ray Focusing Based on Strongly Curved Hopg Crystals

1995 ◽  
Vol 39 ◽  
pp. 109-117
Author(s):  
Burkhard Beckhoff ◽  
Birgit Kanngießer
Keyword(s):  
High Intensity ◽  
Focal Plane ◽  
Bragg Reflection ◽  
Pyrolytic Graphite ◽  
Trace Element Analysis ◽  
Detection Sensitivity ◽  
Element Analysis ◽  
X Ray ◽  
Wide Range ◽  
Very High

X-ray focusing based on Bragg reflection at curved crystals allows collection of a large solid angle of incident radiation, monochromatization of this radiation, and condensation of the beam reflected at the crystal into a small spatial cross-section in a pre-selected focal plane. Thus, for the Bragg reflected radiation, one can achieve higher intensities than for the radiation passing directly to the same small area in the focal plane. In that case one can profit considerably from X-ray focusing in an EDXRF arrangement. The 00 2 reflection at Highly Oriented Pyrolytic Graphite (HOPG) crystals offers a very high intensity of the Bragg reflected beam for a wide range of photon energies. Furthermore, curvature radii smaller than 10 mm can be achieved for HOPG crystals ensuring efficient X-ray focusing in EDXRF applications. For the trace analysis of very small amounts of specimen material deposited on small areas of thin-filter backings, HOPG based X-ray focusing may be used to achieve a very high intensity of monochromatic excitation radiation.

Cassava Processing in Sub-Saharan Africa: the Implications for Expanding Cassava Production

1994 ◽  
Vol 23 (3) ◽  
pp. 197-205 ◽  
Author(s):  
Felix Izu Nweke
Keyword(s):  
Food Security ◽  
Water Supply ◽  
Sub Saharan Africa ◽  
Wide Range ◽  
Intensive Use ◽  
Cassava Production ◽  
Sub Saharan ◽  
Processing Techniques ◽  
Technical Solutions ◽  
Poor Soil

Cassava makes an important contribution to improving food security and rural incomes in sub-Saharan Africa, as it is tolerant of drought and poor soil and its cultivation does not require much labour. However, the fresh roots are bulky and perishable and need to be processed before they can be marketed; processing also removes the cyanogens which make many varieties poisonous in their raw form. Cassava roots are turned into granules, flours, pastes and chips, with a wide range of flavours and appearances for different areas and markets. Many different processing techniques are used, some of which make intensive use of fuelwood while others require a plentiful water supply. These requirements, as well as the need for a good transport and marketing infrastructure, limit the expansion of cassava production in sub-Saharan Africa, but technical solutions are being found.

CFD Simulation of Fluid Flow Through Porous Media: Application to Decomposed Gases Flow Through Foam Pattern in Lost Foam Casting

Materials ◽  
2003 ◽  
Author(s):  
Sayavur I. Bakhtiyarov ◽  
Ruel A. Overfelt
Keyword(s):  
Cfd Simulation ◽  
Reynolds Numbers ◽  
Phase Flow ◽  
Flow Through Porous Media ◽  
Foam Material ◽  
Element Analysis ◽  
Wide Range ◽  
Flow Through ◽  
Foam Pattern ◽  
Lost Foam

Numerical simulation of decomposed gases through foam pattern was conducted using finite element analysis. A new kinetic model is proposed for gaseos phase flow between molten metal and foam material. The computations were performed for a wide range of Reynolds numbers. The results of the simulations are compared with the experiemental data obtained in this study.

NOVEL COUPLING CONSTRAINT TECHNIQUE FOR EXPLICIT FINITE ELEMENT ANALYSIS

2004 ◽  
Vol 01 (02) ◽  
pp. 309-328
Author(s):  
R. J. HO ◽  
S. A. MEGUID ◽  
R. G. SAUVÉ
Keyword(s):  
Finite Element ◽  
Current Method ◽  
Explicit Integration ◽  
Rotation Tensor ◽  
Element Analysis ◽  
Explicit Finite Element ◽  
Explicit Finite Element Analysis ◽  
Wide Range ◽  
Large Rotations ◽  
Generalized Constraint

This paper presents a unified novel technique for enforcing nonlinear beam-to-shell, beam-to-solid, and shell-to-solid constraints in explicit finite element formulations. The limitations of classical multi-point constraint approaches are examined at length, particularly in the context of explicit solution schemes. Novel formulation of a generalized constraint method that ensures proper element coupling is then presented, and its computer implementation in explicit integration algorithms is discussed. Crucial in this regard is the accurate and efficient representation of finite rotations, accomplished using an incremental rotation tensor. The results of some illustrative test cases show the accuracy and robustness of the newly developed algorithm for a wide range of deformation, including that in which large rotations are encountered. When compared to existing works, the salient features of the current method are in evidence.

Measurement and Calculation of Elastic Properties in Low Carbon Steel Sheet

2005 ◽  
Vol 495-497 ◽  
pp. 1591-1596 ◽  
Author(s):  
Vladimir Luzin ◽  
S. Banovic ◽  
Thomas Gnäupel-Herold ◽  
Henry Prask ◽  
R.E. Ricker
Keyword(s):  
Carbon Steel ◽  
Elastic Property ◽  
Elastic Properties ◽  
Steel Sheet ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Forming Process ◽  
Element Analysis ◽  
Wide Range ◽  
Carbon Steel Sheet

Low carbon steel (usually in sheet form) has found a wide range of applications in industry due to its high formability. The inner and outer panels of a car body are good examples of such an implementation. While low carbon steel has been used in this application for many decades, a reliable predictive capability of the forming process and “springback” has still not been achieved. NIST has been involved in addressing this and other formability problems for several years. In this paper, texture produced by the in-plane straining and its relationship to springback is reported. Low carbon steel sheet was examined in the as-received condition and after balanced biaxial straining to 25%. This was performed using the Marciniak in-plane stretching test. Both experimental measurements and numerical calculations have been utilized to evaluate anisotropy and evolution of the elastic properties during forming. We employ several techniques for elastic property measurements (dynamic mechanical analysis, static four point bending, mechanical resonance frequency measurements), and several calculation schemes (orientation distribution function averaging, finite element analysis) which are based on texture measurements (neutron diffraction, electron back scattering diffraction). The following objectives are pursued: a) To test a range of different experimental techniques for elastic property measurements in sheet metals; b) To validate numerical calculation methods of the elastic properties by experiments; c) To evaluate elastic property changes (and texture development) during biaxial straining. On the basis of the investigation, recommendations are made for the evaluation of elastic properties in textured sheet metal.

A Geometric Parametric Analysis of a Magnetorheological Engine Mount

2010 ◽  
Author(s):  
Walter Anderson ◽  
Constantine Ciocanel ◽  
Mohammad Elahinia
Keyword(s):  
High Frequency ◽  
New Technology ◽  
Low Frequency ◽  
Variable Stiffness ◽  
Small Displacement ◽  
Element Analysis ◽  
Mr Fluid ◽  
Wide Range ◽  
Engine Mount ◽  
Vehicle Technology

Engine vibration has caused a great deal of research for isolation to be performed. Traditionally, isolation was achieved through the use of pure elastomeric (rubber) mounts. However, with advances in vehicle technology, these types of mounts have become inadequate. The inadequacy stems from the vibration profile associated with the engine, i.e. high displacement at low frequency and small displacement at high frequency. Ideal isolation would be achieved through a stiff mount for low frequency and a soft mount for high frequency. This is contradictory to the performance of the elastomeric mounts. Hydraulic mounts were then developed to address this problem. A hydraulic mount has variable stiffness and damping due to the use of a decoupler and an inertia track. However, further advances in vehicle technology have rendered these mounts inadequate as well. Examples of these advances are hybridization (electric and hydraulic) and cylinder on demand (VCM, MDS & ACC). With these technologies, the vibration excitation has a significantly different profile, occurs over a wide range of frequencies, and calls for a new technology that can address this need. Magnetorheological (MR) fluid is a smart material that is able to change viscosity in the presence of a magnetic field. With the use of MR fluid, variable damping and stiffness can be achieved. An MR mount has been developed and tested. The performance of the mount depends on the geometry of the rubber part as well as the behavior of the MR fluid. The rubber top of the mount is the topic of this study due to its major impact on the isolation characteristics of the MR mount. To develop a design methodology to address the isolation needs of different hybrid vehicles, a geometric parametric finite element analysis has been completed and presented in this paper.

Analysis of Thick-Walled Pipeline Elements Operating in Creep Conditions

2015 ◽  
Vol 712 ◽  
pp. 63-68
Author(s):  
Przemysław Osocha ◽  
Bohdan Węglowski
Keyword(s):  
Finite Element ◽  
Test Data ◽  
Creep Test ◽  
Power Plants ◽  
Steam Pressure ◽  
Creep Model ◽  
Creep Process ◽  
Fe Model ◽  
Element Analysis ◽  
Wide Range

In some coal-fired power plants, pipeline elements have worked for over 200 000 hours and increased number of failures is observed. The paper discuses thermal wear processes that take place in those elements and lead to rupture. Mathematical model based on creep test data, and describing creep processes for analyzed material, has been developed. Model has been verified for pipeline operating temperature, lower than tests temperature, basing on Larson-Miller relation. Prepared model has been used for thermal-strength calculations based on a finite element method. Processes taking place inside of element and leading to its failure has been described. Than, basing on prepared mathematical creep model and FE model introduced to Ansys program further researches are made. Analysis of dimensions and shape of pipe junction and its influence on operational element lifetime is presented. In the end multi variable dependence of temperature, steam pressure and element geometry is shown, allowing optimization of process parameters in function of required operational time or maximization of steam parameters. The article presents wide range of methods. The creep test data were recalculated for operational temperature using Larson-Miller parameter. The creep strain were modelled, used equations and their parameters are presented. Analysis of errors were conducted. Geometry of failing pipe junction was introduced to the Ansys program and the finite element analysis of creep process were conducted.

Comparative study of finite element analysis of steel silos with rectangular and I stiffeners

2021 ◽  
Vol 10 (1) ◽  
pp. 9
Author(s):  
Prasad Lakshmi ◽  
Neethu Elsa Anil
Keyword(s):  
Reinforced Concrete ◽  
Element Analysis ◽  
Plate Structures ◽  
Steel Reinforced Concrete ◽  
Wide Range ◽  
Earthquake Load ◽  
The Stability ◽  
Dynamic Loading Conditions ◽  
Steel Silos ◽  
Static And Dynamic Loading

Silos are used by a wide range of industries to store bulk solids in quantities ranging from a few tones to hundreds or thousands of tones. They can be constructed of steel or reinforced concrete. Steel bins range from heavily stiffened flat plate structures to efficient unstiffened shell structures. They can be closed or open. They are subjected to many different static and dynamic loading conditions, mainly due to the unique characteristics of stored materials. Wind and earthquake load often undermine the stability of the silos. A steel silo with and without stiffeners is adopted and static structural analysis and dynamic analysis is done. The analysis is done by idealizing geometry, material and boundary conditions. Keywords: steel, reinforced concrete, silos.

Sign in / Sign up

Export Citation Format

Share Document